Do I have enough Light?

I am wondering what I can expect from my plants with the current setup I'm using. Do I have Enough Light? What can I expect for yields? Any Advice?

8 60W Ultra LED (9W) A19 LED 5k
4 100W(14W) PAR38 Flood LED
2 100W (9W) A19 LED 3500k
4 40W T12 (2 Blue, 2 Red)
1 4Foot 10W Growing Light
1 16 Foot Lightify LED Strip On Plant Grow Mode

10 Gallons Tap Water
PH is about 5.5-6
90ML Micro
180ML Bloom
22ML Cal-Mag
10ML Flavoricious
20ML Rapid Starter

I have 6 (5 Gallon) buckets with Cyco Pellets mixed with Organic Coco Coir. 6 Plants

You have enough light for them now.. but it's not going to produce much in flower.. a 400-600 watt hid would be a better choice..

I agree, you are wasting electricity with all that randomness. A simple hid or cob panel would end it all.

never

also them led bulbs with the plastic or glass tops work better if you remove the plastic or glass out the way you don`t need it to be defused

Enough for veg that they wont get too stretchy.
But dont expect to get more then 20grams after harvest and dry.
4 Decent DIY Cobs and youd get that per plant with a lot less wasted power.

What is a good LED Panel to buy? I was looking at these 3

https://www.amazon.com/gp/product/B00UORXSIU/ref=pd_sim_86_6?ie=UTF8&psc=1&refRID=N1B8AYG0X1J5NJJ81ENK

https://www.amazon.com/gp/product/B00UORXUBA/ref=pd_sim_86_7?ie=UTF8&psc=1&refRID=R3KQQS8K0SZKE4SEGPPM

http://boston.craigslist.org/bmw/grd/5812982111.html

Spend 200$ or less and get 1000wor 600w with an air cooled hood or tube..

Hixc said:

What is a good LED Panel to buy? I was looking at these 3

https://www.amazon.com/gp/product/B00UORXSIU/ref=pd_sim_86_6?ie=UTF8&psc=1&refRID=N1B8AYG0X1J5NJJ81ENK

https://www.amazon.com/gp/product/B00UORXUBA/ref=pd_sim_86_7?ie=UTF8&psc=1&refRID=R3KQQS8K0SZKE4SEGPPM

http://boston.craigslist.org/bmw/grd/5812982111.html

Click to expand...

You can build a much better light than you can buy on Amazon for close to the same cost..
@CobKits is a good place to start..http://cobkits.com

http://timbergrowlights.com/products is another good choice, I had great customer service with them.

THE KONASSURE said:

never

also them led bulbs with the plastic or glass tops work better if you remove the plastic or glass out the way you don`t need it to be defused

Click to expand...

Yup they give off a lot more light without the glass dome on them. I would be careful removing that though.

The 9w led ( 60w ) without glass cover tested at 20k lux around 3-4 inches.

I was trying to see if that type would really do anything.

I would not waste my money on any of though you suggested build a cob light or buy one you wont be disappointed

I got a deal for 800$ on 2 Kind K3 L600 LED Panels. What should be the height I set these at? what kind of yield can I expect now with 6 plants in a 5x5x8 room with both of these LED? there rated at 320W Each

Day 19

I'd say you'll do much better now.

At their stage of growth I would say 20-24".. How much you yield is up to you... not the lights..
6 plants can yield 6 oz or 12lbs.. somewhere in between!!

I'm trying to figure out what my plants need... 1 of my plants are showing purple stems up towards the top of the plants. Should I cut the tips of the top set of leaves or leave them? I posted some pictures. If anyone notices anything let me know please.

It could just be strain related, not all purple stems are a sign of deficiency or problems.
Cant see a fan in there so if you haven't got one get one. I assume you have an extractor fan for heat and air exchange?
If its 31 degrees C its a bit hot.

Also I'm not sure what you mean by cut the tips of the leaves off? If you mean top them them or fim then by all means do that but look up the correct way to do so.

Looks like a slight magnesium deficiency... or it could be your ph is up...

Hixc said:

I'm trying to figure out what my plants need... 1 of my plants are showing purple stems up towards the top of the plants. Should I cut the tips of the top set of leaves or leave them? I posted some pictures. If anyone notices anything let me know please.

Click to expand...

I was checking out your setup and noticed your nutes on the floor..
I think if you look it says to store them in a cool dark place.. I think they degrade from light and heat... and yes top em....
Nice setup!

I notice my PH level keeps climbing throughout the day and I am constantly having to lower PH.. I don't have any fan setup yet other then the 16 fans in the leds pushing air out, I do have a 4x1 vent in the room so it isn't completely closed off. Its reading 31% Humidity, 81F. What humidity and temp do I shoot for? Temp of the room ? or the temp by the leaves under the light where I have my gauge now?

Thanks for the tip with the solution on the floor!

Hixc said:

I notice my PH level keeps climbing throughout the day and I am constantly having to lower PH.. I don't have any fan setup yet other then the 16 fans in the leds pushing air out, I do have a 4x1 vent in the room so it isn't completely closed off. Its reading 31% Humidity, 81F. What humidity and temp do I shoot for?

Click to expand...

Your fine with that temp. I couldn't read the thermometer well enough to see if it was the temp but assumed it wasn't the humidity because that's a bit low. My climate is different though. Even if you don't have temp problems you want to extract to exchange air, that is vital. If your space is open then you could just put a good oscillating fan in there and that will move the plant and make them stronger and move the air around them.