Chris Hume
Member
Ok guys my dyna gro foliage pro and dyna gro bloom will be here tomorrow, whoever has expierence,
Can you give me some pointers or what mix you use? (Nute/h2o)
Can you give me some pointers or what mix you use? (Nute/h2o)
Dyna Foliage Pro/Bloom
- Thread starter Chris Hume
- Start date
They publish a schedule here: http://www.dyna-gro.com/Website pdf Files/DG Hydroponic Feeding Chart.pdf
(Just to get you started. I haven't used it.).
(Just to get you started. I haven't used it.).
Chris Hume
Member
Thanks a lot bud
questiondj42
Well-Known Member
Personally, I am using FP and Protekt throughout the entire grow. I"ve tried using bloom twice, and have experienced significant yellowing of the fan leaves. Switching back to just FP keeps everything green. I added KLN as well, and have seen a marked difference in root growth in both my veg and bloom areas. I'm running 400ppm in veg and 7-800ppm in bloom.
Chris Hume
Member
What would 400 ppm be in laymen terms lol
questiondj42
Well-Known Member
If you're using RO and doing hydro, I think it works out to be 2.5ml/gal protekt, 7ml/gal FP.
caveman117
Well-Known Member
ive recently been using fp a couple different ways. stand alone, and with silica blast and rhizo blast by botanicare.
I'm also trying to see if I can move away from using "bloom" nutes
I'm also trying to see if I can move away from using "bloom" nutes
Chris Hume
Member
I'm doing soil. What is "RO"? Sorry I'm kinda new, I mean I've done grows but this will be my first with nutes.
2ml/gal Pro-Tekt and 5ml Foliage-Pro gives 424ppm (by calculations). NPK ratio is 3-1-2.4.
Someone said they use this through flower. That sounds high for N. You could blend the bloom to keep some of the foliage-pro's N. It doesn't have to be either/or.
chuck estevez
Well-Known Member
I only use FP, I never use bloom. It works great.especially in pro-mix
Last edited:
r o is reverse osmosis, basically filtered water, and ppm is parts per million. its a way to measure the strength of your nutrient solution,
Chris Hume
Member
Ok so my dyna grow foliage says 1ml weekly or 2-3 ml every 2-4 weeks!?!? So from you guys expierence how often should I feed them? And should I feed them with regular H20 in between nutes?
Last edited:
caveman117
Well-Known Member
ive been feeding fp at 2.5-3 ml per gallon lately. but I have a feeling this may be light, on a w-w-f basis.
Resinhound
Well-Known Member
I would use feed,feed,just water,etc.keep in mind you will only be watering or feeding every 2-3 days or when the top couple inches of soil is dry.Make sure your pot has drainage and water enough that you get some runoff
Chris Hume
Member
Thanks guys!
homebrewer
Well-Known Member
If you feed at every watering, the maintenance directions on the bottle are a good starting point. Since you're in soil, maybe halve the suggested dose.
Chris Hume
Member
Put enough water on it to drain through till I can see some in the drain reservoir?
Resinhound
Well-Known Member
Yep get a bit of run off out the bottom of the pot.
Chris Hume
Member
Damn that's gonna be a lot of h2O!! It won't hurt her?
Kevin McCallister
Member
15ml per gal. Use 7.0 h20. For both.