Exhaust fan wiring - safe or sorry?

Hey yall i'm pretty sure this fan is setup right, but just wanted to make sure i'm not gonna light my growbox on fire. Its an AC 120V comp fan- the cords coming out of the fan weren't color coordinated or anything, and I took the cord from a lamp and wired it to the fan. Dont know if this does anything or lights me on fire, but I wired the left wire from the lamp (could tell by the wider prong) to what seemed to be the left from the fan.
when i plug it in it works fine, but i havent tried leaving it in for a long time
thanks

heres the pics

how many volts is the fan rated for

are you sure that's a 120vac fan??

looks small....

looks like a 12vdc fan to me...

thats what i was thinking looks a little bigger than a pc fan

It was somewhere around 110-120V, can't find it right now

oh sorry im a stoner it says on there exactly that, 110-120V

it says it on the fan.... it should say it on that white sticker....

well if it's rated for 110 vac then it should work well... how many CFM's is that??

have you plugged it in??

just googled 120 volt pc fans and saw one that looked almost like that says 22 cfm so it should work fine

100 cfm, its a pretty hefty fucker, 4 1/4' x 4 1/4" x 1 1/2" inches
yea i plugged it in and it works, i just didnt no if it would start a fire or sumthin later

BuddhaBud said:

100 cfm, its a pretty hefty fucker, 4 1/4' x 4 1/4" x 1 1/2" inches
yea i plugged it in and it works, i just didnt no if it would start a fire or sumthin later

Click to expand...

Yes you should be just fine, if it were a 12 volt dc fan, it would have burnt up instantly when plugging into 120 volt AC. And by burnt up I mean a little puff of smoke would have come out of it, and it would have never worked again. You should always try and keep your splices inside a junction box however, at the very least make sure your wire nut splices are made up tight.

if your using case fans, i would say plug in a comp power supply and then the fans into that. the overhead for running the psu is nominal and you won't have to worry about splices or anything.

K3rnal InGus said:

Yes you should be just fine, if it were a 12 volt dc fan, it would have burnt up instantly when plugging into 120 volt AC. And by burnt up I mean a little puff of smoke would have come out of it, and it would have never worked again. You should always try and keep your splices inside a junction box however, at the very least make sure your wire nut splices are made up tight.

Click to expand...

whats a junction box?

those little metal boxes you find inside your walls. they keep all the wireing splices safe from any agitation.

If it works - its good. Fans are pretty simple. If you wire them wrong they either vent to the other direction or doesn't function. With PC fans they usually don't function.
Thats about as tough as it gets.

Make sure your wiring is secure and as water resistent as possible - use shrink tubes if available, or electical tape if not. Leaves exposed wires in a humid place is far from smart.

kophey said:

those little metal boxes you find inside your walls. they keep all the wireing splices safe from any agitation.

Click to expand...

Exactly. They come in metal or plastic and contain and protect the splice. Also if one of your connections did come loose and there was an arc, the junction box would contain it.

sick thanks yall, +rep

If it works your all good...if you wired it wrong it either wouldnt work or would be going in the wrong direction.....if you twisted that nut right and taped it really nice and tight...you need not worry about anything....if the fan is going to "live" wherever you put it then a junction boc would be good...

electrician here, rest assured your fine man, just make sure those wire nuts are on tight and taped.....