BudReaky
Well-Known Member
well ive had another thread about this tent but i let it go.this tent was entirely do it yourself from Homedepot/walmart.
MATERIALS.
9x-8footx2inchx1inch wood. 1.97$each(HDEPOT)
2x-9footx12foot HEAVY duty tarps.13.63$each(wally)23.00 at home depot and lowes!
40- 2 inch screws(1.75inch would be best.)(HDEPOT)
large role industrial strength duct tape along with gorilla tape(had) 8.43$(HDEPOT)
5 foot industrial strength velcro 8.00$(wally)
2x- Tarp-zip 7 foot 9.83$(hdepot(superbadass.)
Total cost was around 80 bux
TOOLS
Staple gun
Screw Driver
Scissors
Knife
Tape Measure
Saw
BONG(lemon skunk inside)
brief summary.
first i cut the boards to there sizes.4x-7foot, 4x- 4foot4inch, 6x- 3feet 8inch.
screws together the 2 main sides with cross supports(extra wood) at the bottom corner of each section.took it into room and built it the rest of the way(not rockt science)
then i started from the bottom with the tarps.bottom floor,right panel,back panel covered with first tarp.staple gund in place pretty snug.folded excess tarp and taped down(looks cool)second tarp covered roof,front panel, left side.cut off excess tarp on that side(might of been the other side,lol).
when through and taped all tarp meet tarp sections and added a few more staples.
stuck adhesive zipper into place then reinforced with duct tape,then cut through the middle of zipper(key part there).after zippers were installed i placed 5 foot velcro strip at bottom.lined the interior with thick black plastic wrap.
GEAR:
lumatek 400w dimmable w/ diy cooltube
Cheapo 400w digi ballast with real cooltube and diy insulation
200cfm PHRESH filter
Stanley Blower
6" insulated ducting
4" ducting
4foot 2x40w T8 shoplight 6400k
oscilating tower fan
HERES MY BABY!
MATERIALS.
9x-8footx2inchx1inch wood. 1.97$each(HDEPOT)
2x-9footx12foot HEAVY duty tarps.13.63$each(wally)23.00 at home depot and lowes!
40- 2 inch screws(1.75inch would be best.)(HDEPOT)
large role industrial strength duct tape along with gorilla tape(had) 8.43$(HDEPOT)
5 foot industrial strength velcro 8.00$(wally)
2x- Tarp-zip 7 foot 9.83$(hdepot(superbadass.)
Total cost was around 80 bux
TOOLS
Staple gun
Screw Driver
Scissors
Knife
Tape Measure
Saw
BONG(lemon skunk inside)
brief summary.
first i cut the boards to there sizes.4x-7foot, 4x- 4foot4inch, 6x- 3feet 8inch.
screws together the 2 main sides with cross supports(extra wood) at the bottom corner of each section.took it into room and built it the rest of the way(not rockt science)
then i started from the bottom with the tarps.bottom floor,right panel,back panel covered with first tarp.staple gund in place pretty snug.folded excess tarp and taped down(looks cool)second tarp covered roof,front panel, left side.cut off excess tarp on that side(might of been the other side,lol).
when through and taped all tarp meet tarp sections and added a few more staples.
stuck adhesive zipper into place then reinforced with duct tape,then cut through the middle of zipper(key part there).after zippers were installed i placed 5 foot velcro strip at bottom.lined the interior with thick black plastic wrap.
GEAR:
lumatek 400w dimmable w/ diy cooltube
Cheapo 400w digi ballast with real cooltube and diy insulation
200cfm PHRESH filter
Stanley Blower
6" insulated ducting
4" ducting
4foot 2x40w T8 shoplight 6400k
oscilating tower fan
HERES MY BABY!