keepitlegal
Member
Hello everyone! This is my first thread after many years of trial and error with many hours spent here gathering wisdom. So I just wanted to say thanks to all the great people here.
Were to start I decided I wanted a to mess with some leds and build a little cab for strain testing before going into the big rooms. So far this is what iv done and to be perfectly honest big rooms are much easier to setup. Tight spaces are a pita.
Started of with an ikea pax wardrobe 23"x20"x79" Tinted the glass and foam insulated the glass door and back panel. Siliconed, panda, and foil tape.
-The cabinet is split in two Veg area is 18"x22"x25" flower area is 18"x22"x49"
-Veg 125 watt cfl 6400k
-Flower is LED ???? Thats were it gets frustrating but will get to that later.
-Circulation fans Thermaltake TT1125 120cm 60cfm cpu fans.
-Exhaust canfan 4" Thermostatically controlled inline 150-160cfm cant remember
-The cabinet is a passive intake setup so air is pulled into the flower chamber up through the veg chamber through the carbon filter and out
-For the intake filters I used G.E. hood range cabon filters and UNI air filter foam with the oil spray from Dust shroom. Does a great job of filtering and not alot of restriction and it also works great as a lightproof filter.
-La crosse wireless temp hygro with two sensors.
So the cab is ready no light leaks, great negative pressure the issue i ran into was the led I was gonna use is a chinese 480w 9 band 320 true watts and heats up the room to much. My buddy has a 300w chinese light that pulls 160 actual watts and i was able to keep temps ideal without a problem.
I would never buy a chinese anything for my grow rooms but it was given to me i figured if i could make it work id give it a shot if it didnt oh well. I did learn real quick that im not going to need that much power and just like hps the more watts the more heat.
Ok so knowing i can control 160 watt of true led power should i put that much in there?
Does area51 and bonsaiheros websites give proper light coverage numbers?
my plan is either area51 rw-150 or rw75 with some added home depot a19 cree bulbs 4 or 6 bulbs idk or is just the rw75 enough?
I dont want to overkill it if its not benificial
So what does everyone think is best?
Were to start I decided I wanted a to mess with some leds and build a little cab for strain testing before going into the big rooms. So far this is what iv done and to be perfectly honest big rooms are much easier to setup. Tight spaces are a pita.
Started of with an ikea pax wardrobe 23"x20"x79" Tinted the glass and foam insulated the glass door and back panel. Siliconed, panda, and foil tape.
-The cabinet is split in two Veg area is 18"x22"x25" flower area is 18"x22"x49"
-Veg 125 watt cfl 6400k
-Flower is LED ???? Thats were it gets frustrating but will get to that later.
-Circulation fans Thermaltake TT1125 120cm 60cfm cpu fans.
-Exhaust canfan 4" Thermostatically controlled inline 150-160cfm cant remember
-The cabinet is a passive intake setup so air is pulled into the flower chamber up through the veg chamber through the carbon filter and out
-For the intake filters I used G.E. hood range cabon filters and UNI air filter foam with the oil spray from Dust shroom. Does a great job of filtering and not alot of restriction and it also works great as a lightproof filter.
-La crosse wireless temp hygro with two sensors.
So the cab is ready no light leaks, great negative pressure the issue i ran into was the led I was gonna use is a chinese 480w 9 band 320 true watts and heats up the room to much. My buddy has a 300w chinese light that pulls 160 actual watts and i was able to keep temps ideal without a problem.
I would never buy a chinese anything for my grow rooms but it was given to me i figured if i could make it work id give it a shot if it didnt oh well. I did learn real quick that im not going to need that much power and just like hps the more watts the more heat.
Ok so knowing i can control 160 watt of true led power should i put that much in there?
Does area51 and bonsaiheros websites give proper light coverage numbers?
my plan is either area51 rw-150 or rw75 with some added home depot a19 cree bulbs 4 or 6 bulbs idk or is just the rw75 enough?
I dont want to overkill it if its not benificial
So what does everyone think is best?