Cabinet
Sandusky Cabinet - $329
Getting the one with the digital lock for security purposes. Was going to go with black for stealth purposes but I just noticed they have an Anti-Micobial White option so I was thinking about that. I was going to build and give it a test run without any sound insulation (FatMat) and was thinking that I could get away without having to paint it or line it in reflective material if I got the white. I know the BCNL Bloombox is just the white metal.
Lights
LED Light (Pro-Grow 400) - $559
2 T5 Light Fixture (2 or 4 bulbs) - $50
LED for the flowering chamber and T5s for the cloning/veg chamber. I want to go with LED for a variety of reasons. No need for a separate ballast (one less plug and one less thing to put in the cab), no need for an additional fan (one less plug/less noise), no heat imprint, lower cost to run it.
Hydroponics
SuperPonics 16 Hydroponic System 22″w x 28″l x 12″h - $250
SuperCloner 50 Plant System -22″w x 28″l x 6″h - $200
Again
Im a noob but from what Ive read thus far I like Superponics setup and that they fit 16 net cups into the tub. My only concern is the 2 net cups. Id like to go with the 7 high tubs for both veg and flowering chambers but Im concerned 6 wont allow enough for adequate root growth on the flowering side. If its not an issue I feel like the extra 5 would be worth it. I was also going to ask if they could customize it and only put 12 3 net cups as opposed to 16 2 net cups but Im not sure if they do this.
The other option I was thinking of was these
- Two for Flowering and One for Veg)
- One for Cloning
Ventilations/Filtration
Whats the difference between Class one and Class II installation?
Soler & Palua TD-100 (Clone/Veg Exhaut) - $75
Solar & Palua TD-100x (Flower Exhaust) - $90
Two (2) 4 x 8 Phresh Filters $80/each
Dark Room Vents
- Will use as passive intakes. Still trying to determine what is necessary. I want slightly negative pressure in the cab so that air is always pulling into the cabinet and there is no chance of odor leaking. I am going to place them in the back side of the cabinet and would like to use as few as possible but at least one in the flowering chamber and one in the cloning/veg chamber. Ive read that you need at least three to four Midget Louver intakes per 4 exhaust so Id like to go with the square/rectangular louver vents if possible. For some reason Ive always had in my head that you need twice as much intake as you do exhaust which would mean two intakes per exhaust hole. If I am running two 4 inch exhausts (one for each chamber) would two 8 x 8 louver vents work (one for each chamber)? If not would I be better off going with two 12 x 12 louver vents or four 8 x 8 louver vents (two of them side by side in each chamber)?
- Either multiple 4 Midget Louver (Circular) or 8 x 8 Louver (Square)
- http://www.icmag.com/ic/showthread.php?t=143040
- http://www.amazon.com/Adorama-Darkroom-Light-Tight-Louvers/dp/B0000A5A8I
- http://www.adorama.com/DKL1224.html
Master Flow 4 in. 90 Degree Round Adjustable Elbow - $5
Insulated Flexible Duct
Quiet Clamps - $7.25/pair
Electrical
Belkin 10-Outlet Surge Protector - $35
Timers
Any suggestions?
Thermometers
Two (2) GrowBright Indoor - Outdoor Thermometer with Hygrometer - $15/each
-
http://www.htgsupply.com/Product-GrowBright-Indoor---Outdoor-Thermometer-with-Hygrometer.asp