Free Grow Software!

sixstring2112

sixstring2112

Well-Known Member
MojoResin said:
As far as I can tell this is written in a .NET/CLR language, probably C#. That's Microsoft proprietary if you don't know, so I wouldn't hold your breath for a Mac version.
Click to expand...
naw im windows 7 here.just didnt want to try and download it if its not for my system ya know.think ill give it a try cause it looks sweet!!
 
ThegrowerMOJO

ThegrowerMOJO

Well-Known Member
mac hahahahahaha was hoping it would die with steve :bigjoint:getting ready to dl this and try it out thx for what i'm sure was a lot of work and hassle.
 
Amaximus

Amaximus

Well-Known Member
just wanted to drop in and say thanks for this software Lucifer.
I have only just completed my first small grow but I'll be starting a bigger project soon and your software will make keeping notes so much easier.

Thanks!
 
MrWeeds989

MrWeeds989

Member
hi,

up until a few days ago, I have benn using the program through Win7.

After a hdd and Power supply crash, i went with ubuntu 11.10 on my new hdd. problem is, I am having a helluva time opening it. i tried moonlight, and reinstalling wine, downloading from codeplex, and sourceforge. I even looked for the sliverlight version, referred to on page 121, (or 122).. but the link is now dead.

any suggestions? I love this program, and hope it works, but i do not plan on ever using windows, or mac again.
 
LuciferX

LuciferX

Well-Known Member
MrWeeds989 said:
hi,

up until a few days ago, I have benn using the program through Win7.

After a hdd and Power supply crash, i went with ubuntu 11.10 on my new hdd. problem is, I am having a helluva time opening it. i tried moonlight, and reinstalling wine, downloading from codeplex, and sourceforge. I even looked for the sliverlight version, referred to on page 121, (or 122).. but the link is now dead.

any suggestions? I love this program, and hope it works, but i do not plan on ever using windows, or mac again.
Click to expand...
You can use the silverlight version but it's super basic right now, most of the tabs are disabled -->http://herbiq.sourceforge.net/LINUX/index.html

After it says it's loaded 100% right click on the loading image and choose install.

I do plan on releasing a full feature linux version but I have a few things in front of that so it may be a while.

Lx
 
MrWeeds989

MrWeeds989

Member
LuciferX said:


Here is the mac osx version link too, same install procedure and same limitations -->http://herbiq.sourceforge.net/OSX/index.html

Lx
Click to expand...
Novell moonlight could not be installed because it is not compatible with firefox 11.0

also, in chromium, it loads to a blank screen :(

am i doing something wrong?

thx for the help :)
 
LuciferX

LuciferX

Well-Known Member
MrWeeds989 said:
Novell moonlight could not be installed because it is not compatible with firefox 11.0

also, in chromium, it loads to a blank screen :(

am i doing something wrong?

thx for the help :)
Click to expand...
You don't see a loading screen/circle thingy at all? I tested in ubuntu and could use it in firefox and chrome both but had a problem getting it going in another distro. I ended up changing some permissions as root and I got it to work, don't recall what it was now though. The silverlight version is a PITA to run on linux and macosx that's why I never updated it again, I will have a gtk+ linux app eventually after I get these other 2 big projects out of the way first

Lx
 
MrWeeds989

MrWeeds989

Member
LuciferX said:
You don't see a loading screen/circle thingy at all? I tested in ubuntu and could use it in firefox and chrome both but had a problem getting it going in another distro. I ended up changing some permissions as root and I got it to work, don't recall what it was now though. The silverlight version is a PITA to run on linux and macosx that's why I never updated it again, I will have a gtk+ linux app eventually after I get these other 2 big projects out of the way first (ipad version and re-write of the core)

Lx
Click to expand...
the circular loading icon appeared, and when finished, screen went blank.
 
MrWeeds989

MrWeeds989

Member
clicked the icon, it performed the install, and i got this error message when i went to open the program.

Details: Failed to execute child process "/home/mrweeds/.config/chromium/Default/Extensions/ldjmcjaammmjjilbjpacphekcgfnmdlk/3.99.0.3_0/moonlight/lunar-launcher" (Permission denied)

thank you for all you do, you are awesome, and the program rocks, which is why i am going through all this crap to get it working again, lol.
 
O

ommpCaregiver

Active Member
LuciferX said:
Blah Blah Blah get the fuck out of my thread hippie.
Click to expand...
I see you have an interest to build a version using GTK for linux... That is awesome, I wish you had been nicer to me when I suggested you do something like this. If you start the code base, I would love to help, I am very profiecient in GTK with python and C++ as well as Qt (Pyside for python3 is what I write for work atm) python and c++. I like to use glade for gui design and I code in gedit (yep Im the type of guy that doesn't use an IDE very often due to the abstraction it creates between me and my executable.)

I recently ordered a beaglebone to do my next hardware development on, as I have extended what is capable on an arduino mega with ethernet shield and sd card. You should check by my open source project on github called openGreenhouse. The software and tracking capabilities are very far behind yours, but the hardware and physical are where I specialize.

^and Im just jokingly busting your balls a bit up there with the quote you said to me a year ago or so. Yeah Im an old hippie in Oregon, and a software engineer... But I am just trying to help Gaia and was trying to see if you would be interested in not using a vulnerable microsoft proprietary software stack ;) Im glad to read that you are.
 
bass1014

bass1014

Well-Known Member
dude / dudes/dudets this thing rocks i can wait to watch my computer plant grow after i input this grow session.. will keep it posted thanks again
 
G

giantsalwayswin

Member
recieving this error

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.IO.FileNotFoundException: Could not load file or assembly 'Ionic.Zip, Version=1.9.1.5, Culture=neutral, PublicKeyToken=edbe51ad942a3f5c' or one of its dependencies. The system cannot find the file specified.
File name: 'Ionic.Zip, Version=1.9.1.5, Culture=neutral, PublicKeyToken=edbe51ad942a3f5c'
at HERB.IQ.INSTALLER.Form1.FinishButton_Click(Object sender, EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.239 (RTMGDR.030319-2300)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
----------------------------------------
HERB.IQ.INSTALLER
Assembly Version: 0.1.0.0
Win32 Version: 0.1.0.0
CodeBase: file:///C:/Users/Andrew/AppData/Local/Microsoft/Windows/Temporary Internet Files/Content.IE5/HNXZS5UZ/HERB.IQ.UPGRADE.0.7.3.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.235 built by: RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.276 built by: RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.258 built by: RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.233 built by: RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
 
LuciferX

LuciferX

Well-Known Member
giantsalwayswin said:
recieving this error

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.IO.FileNotFoundException: Could not load file or assembly 'Ionic.Zip, Version=1.9.1.5, Culture=neutral, PublicKeyToken=edbe51ad942a3f5c' or one of its dependencies. The system cannot find the file specified.
File name: 'Ionic.Zip, Version=1.9.1.5, Culture=neutral, PublicKeyToken=edbe51ad942a3f5c'
at HERB.IQ.INSTALLER.Form1.FinishButton_Click(Object sender, EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].

************** Loaded Assemblies **************
mscorlib
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.239 (RTMGDR.030319-2300)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v4.0.30319/mscorlib.dll
----------------------------------------
HERB.IQ.INSTALLER
Assembly Version: 0.1.0.0
Win32 Version: 0.1.0.0
CodeBase: file:///C:/Users/Andrew/AppData/Local/Microsoft/Windows/Temporary Internet Files/Content.IE5/HNXZS5UZ/HERB.IQ.UPGRADE.0.7.3.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.235 built by: RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.276 built by: RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.258 built by: RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Xml
Assembly Version: 4.0.0.0
Win32 Version: 4.0.30319.233 built by: RTMGDR
CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Click to expand...
Try to run the install off your desktop
 
S

SPONGLE

Member
Any ideas why days are displayed like this?

19,3247924018877.0 days tracking LSD - 1
19,3247924018877.0 days tracking LSD - 2
19,3247924018877.0 days tracking LSD - 3
19,3247924018877.0 days tracking LSD - 4

Thanks LuciferX! for all the work you do. Great program.:clap:
 
C

CharlieFarlie

Member
Hey peaple my Plants are about a length of a hand, when does the bud come out (if they are female) ? And do they grow faster after a while .. ? Any tips ?
Thanks
 
You must log in or register to reply here.
Top