Gorilla Bubble from Tonygreens Tortured Beans

Status
Not open for further replies.
st0wandgrow

st0wandgrow

Well-Known Member
st0wandgrow said:
Do you front the beans for promo's and freebies, or does the seed bank take the loss and pay you for them?
Click to expand...
tonygreen said:
nah my promos and freebies come from my stock. No one gets paid for them. I don't consider it a loss to myself just spreading love.
Click to expand...
@Beemo here's the answer. I know Bodhi hands out the freebies on his dime too. Pretty sure this is standard protocol across the industry. Seed banks don't pay the breeders for freebie promo packs.
 
T

tonygreen

Well-Known Member
Man I tried to see if DBJ had time for the 4th of july thing but he is going to be out of town for the holiday and not sure when he is leaving.
But told me he has the booth at the cup.

Id pm him and ask bro, I got no problems with it if he can handle it. I am sure the question will not surprise him.
I got no problems with it at all but dont want to speak for him because he is the on filling orders ha!


Also Pal posted a list of cuts and clones GLG will have at the cup...

Clones n cuts at the cup
*
*Irene, Hells Angel, Ghost, Fire, Alien, Grape, OG's
Chrome Diesel, Qookies, Chaos, Darlins' Net(2 phenos), Casey Jones, Sour Strawberry, *Bright Moments, White Noise, Apollo 13, Somalia Taxi Ride, Venus Fly Trap, Mr Nice Guy, Hazmat, BlackRose, GG#4, Chuckies Bride, Mob Boss, Bruce Banner #3, Sensei Star, God Bud, Strawberries n creme, Island Sweet Skunk..
 
Stonironi

Stonironi

Well-Known Member
tonygreen said:
Man I tried to see if DBJ had time for the 4th of july thing but he is going to be out of town for the holiday and not sure when he is leaving.
But told me he has the booth at the cup.

Id pm him and ask bro, I got no problems with it if he can handle it. I am sure the question will not surprise him.
I got no problems with it at all but dont want to speak for him because he is the on filling orders ha!


Also Pal posted a list of cuts and clones GLG will have at the cup...

Clones n cuts at the cup
*
*Irene, Hells Angel, Ghost, Fire, Alien, Grape, OG's
Chrome Diesel, Qookies, Chaos, Darlins' Net(2 phenos), Casey Jones, Sour Strawberry, *Bright Moments, White Noise, Apollo 13, Somalia Taxi Ride, Venus Fly Trap, Mr Nice Guy, Hazmat, BlackRose, GG#4, Chuckies Bride, Mob Boss, Bruce Banner #3, Sensei Star, God Bud, Strawberries n creme, Island Sweet Skunk..
Click to expand...

I ended up grabbing a cut of Chaos at the Cup !
 
PerroVerde

PerroVerde

Well-Known Member
Stonironi said:
How do you run your bubble cloner ? I built one and have had zero luck with it ?? Thanks , have fun on vacation !!
Click to expand...
I use a 10 gallon Rubbermaid roughneck tote and I cut 35 2" holes in the top/lid. Holes are cut with a 2" hole saw and electronic drill far enough apart that 2" net pot cups can overlap the holes without touching or bumping each other. Take 35 2" net pots and cut the net part off so you just have the solid plastic part of the cup left. In mine I use six foam bubble wands that I cut to length I weigh the suction cups that hold the wands down with large stainless steel washers cause I haven't found a silicon or adhesive that works for an extended period. You will need a heavy duty air pump for best results. 2" foam clone colors are available at Amazon, get 50, they tear ever now and again. Water temps for cloning should be around 75 to 80 degrees for best success, lower then 70 will take forever and you'll loose clones. You can leave the clones in the closer for a long time, just add nutes like dwc and keep the water level up. If left to long the roots will entangle and cause a couple days of lag once transplanted due to a bit of shock.

IMAG0830.jpg

https://www.cleanitsupply.com/p-91949/rubbermaid-home-products-roughneck-storage-box-10-gal-steel-gray-rcp2214ste.aspx?utm_source=google&utm_medium=cse&utm_term=RCP2214STE&gclid=CIaZ2J6JqM0CFQmVfgod_xQCzg

https://www.amazon.com/EcoPlus-728450-Single-Outlet-Commercial/dp/B002JLJC0W/ref=sr_1_1?ie=UTF8&qid=1465927365&sr=8-1&keywords=Hydro+air+pumps

https://www.amazon.com/Aquarium-Stone-Bubble-Wall-Green/dp/B018P45VHO/ref=sr_1_35?ie=UTF8&qid=1465927561&sr=8-35&keywords=Bubble+wand+air+stone

https://www.amazon.com/gp/aw/s/ref=is_s?k=clone+collors

https://www.amazon.com/gp/aw/d/B0058PB574/ref=mp_s_a_1_10?qid=1465928058&sr=8-10&pi=AC_SX236_SY340_QL65&keywords=2"+net+cups
 
Last edited:
bottletoke

bottletoke

Well-Known Member
PerroVerde said:
I use a 10 gallon Rubbermaid roughneck tote and I cut 35 2" holes in the top/lid. Holes are cut with a 2" hole saw and electronic drill far enough apart that 2" net pot cups can overlap the holes without touching or bumping each other. Take 35 2" net pots and cut the net part off so you just have the solid plastic part of the cup left. In mine I use six foam bubble wands that I cut to length I weigh the suction cups that hold the wands down with large stainless steel washers cause I haven't found a silicon or adhesive that works for an extended period. You will need a heavy duty air pump for best results. 2" foam clone colors are available at Amazon, get 50, they tear ever now and again. Water temps for cloning should be around 75 to 80 degrees for best success, lower then 70 will take forever and you'll loose clones. You can leave the clones in the closer for a long time, just add nutes like dwc and keep the water level up. If left to long the roots will entangle and cause a couple days of lag once transplanted due to a bit of shock
Click to expand...
I use s similar way that I have more success with, in stead of the air stones in water I use a copy of the ez cloner and spray water with a submersible pump attached to a homemade PVC manifold with nozzles placed inside a dozen or so holes.
If you do a search on homemade aeroponic cloner or ez cloner their a ton of links with thorough instructions.
 
PerroVerde

PerroVerde

Well-Known Member
bottletoke said:
I use s similar way that I have more success with, in stead of the air stones in water I use a copy of the ez cloner and spray water with a submersible pump attached to a homemade PVC manifold with nozzles placed inside a dozen or so holes.
If you do a search on homemade aeroponic cloner or ez cloner their a ton of links with thorough instructions.
Click to expand...
I have two 396 gph pumps, pvc elbows and piping, and 100 360° aeroponic sprayers but haven put one together yet... :)
 
bottletoke

bottletoke

Well-Known Member
PerroVerde said:
I have two 396 gph pumps, pvc elbows and piping, and 100 360° aeroponic sprayers but haven put one together yet... :)
Click to expand...
They work great! What I include is a tee right at the discharge of the pump and put a valve at one end then connect the manifold at the other. This way you can control the pressure by opening the valve a bit. At full pressure sometimes these units can make a mess.
 
Stonironi

Stonironi

Well-Known Member
PerroVerde said:
I use a 10 gallon Rubbermaid roughneck tote and I cut 35 2" holes in the top/lid. Holes are cut with a 2" hole saw and electronic drill far enough apart that 2" net pot cups can overlap the holes without touching or bumping each other. Take 35 2" net pots and cut the net part off so you just have the solid plastic part of the cup left. In mine I use six foam bubble wands that I cut to length I weigh the suction cups that hold the wands down with large stainless steel washers cause I haven't found a silicon or adhesive that works for an extended period. You will need a heavy duty air pump for best results. 2" foam clone colors are available at Amazon, get 50, they tear ever now and again. Water temps for cloning should be around 75 to 80 degrees for best success, lower then 70 will take forever and you'll loose clones. You can leave the clones in the closer for a long time, just add nutes like dwc and keep the water level up. If left to long the roots will entangle and cause a couple days of lag once transplanted due to a bit of shock.

View attachment 3707750

https://www.cleanitsupply.com/p-91949/rubbermaid-home-products-roughneck-storage-box-10-gal-steel-gray-rcp2214ste.aspx?utm_source=google&utm_medium=cse&utm_term=RCP2214STE&gclid=CIaZ2J6JqM0CFQmVfgod_xQCzg

https://www.amazon.com/EcoPlus-728450-Single-Outlet-Commercial/dp/B002JLJC0W/ref=sr_1_1?ie=UTF8&qid=1465927365&sr=8-1&keywords=Hydro+air+pumps

https://www.amazon.com/Aquarium-Stone-Bubble-Wall-Green/dp/B018P45VHO/ref=sr_1_35?ie=UTF8&qid=1465927561&sr=8-35&keywords=Bubble+wand+air+stone

https://www.amazon.com/gp/aw/s/ref=is_s?k=clone+collors

https://www.amazon.com/gp/aw/d/B0058PB574/ref=mp_s_a_1_10?qid=1465928058&sr=8-10&pi=AC_SX236_SY340_QL65&keywords=2"+net+cups
Click to expand...
What do you use the rt pots for ? I have the exact same cloner . It just never seemed to root for me? I put ro water and at 7 days I added 10 drops of calmag per gallon . It took like 5 weeks to get any roots and by then clones were pathetically dead
 
Stonironi

Stonironi

Well-Known Member
bottletoke said:
They work great! What I include is a tee right at the discharge of the pump and put a valve at one end then connect the manifold at the other. This way you can control the pressure by opening the valve a bit. At full pressure sometimes these units can make a mess.
Click to expand...
I had an ez cloner and had bad results with this thing . It always sprayed everywhere so your idea about turning it down with a valve is a good one . I think the pump sprayed so hard it would damage any roots that began to grow ?
 
Status
Not open for further replies.
Top