Grow Chamber's, HATCH Style

LoganSmith said:

Ya I really enjoy it. My girlfriends mom lives out on top of a Mountain with no one around for miles, I just took some great shoots. I also will be getting some new lens when I start making a little more money, or save about $4-$5K.[/quot

Ya Bro,,,,,I Bet They Are Some Great, Breath Taking Shot's!!!,,,,,,,Ya, For Some Reason They Just Don't Give That Stuff Away!!!!!,,,,,,,It's Crazy What Some Of Those Len's Cost!!!!!!!

Click to expand...

LoganSmith said:

I also have about three books for cs3 that I'm reading. This is a great read, some much info to consume.

Peace-

Click to expand...

LoganSmith said:

Ok, so I just finished my aero cloner last night. I redesigned the aero part to mimic the EZ cloner (look).
I have put a total of 30 180* sprayers, 4 90* sprayers, and 5 360* sprayers.

So I tried to get on last night but the I kept getting an error. I didn't know how long you keep the sprayers on??? So I put them a timer 15 minutes on and 45 minutes off.
Also do you put anything in the water, I just added B1 for root growth.
I have about 5 gallons in the ten gallon container, the sprayers are working perfect so far.

I took a total of 25 cuttings and decided to do a test with them,
I have 6 in the organic plugs(which with using the neop disks I find the plugs to be to tall so I cut about 1/2" of the top(organic plug).
I have 6 in a material that I been using for a while and get a ok % rate(I just redesigned them by making them thinner) no it looks like a plug.
I have 6 with out any plug, just the neop disk holding them in place. I did cut the bigger sun leaves by 60%. I also cut the stem down the middle and used some root hormones.
Then the final 7 are in just the neop disk with no hormones and just the normal 45* cut at the bottom of the stem.

Hatch let me know what you think and any advice on the time for the sprayers and if I should add anything else to the water.

Peace and thanks for all of the help.-

Click to expand...

HATCH said:

LoganSmith, Hey What's UP???????

Ya, Think They Were Doing Maintenance Last Night????,,I Was Getting The Error Also.....

But Hell Ya!!!!,,, Sound's Like A Great Break-Though,,,,,,Great Job On The Aero-Bubbler!!!!!,,,,,Great Experiment,,..I'm Betting On The One With Hormones, Basket-Neoprene,,,,,You Should See A Bump-Then A Root, In About 3 Day's,Usaully Right Under The Neoprene...,,,,,,,The One's With The Plug's Could Be Developing This Fast,,But They Won't Break-Through The Plug Until Day 4 To 5,,,,,,,,Really Don't Know About The One's With Just The 45*,,,,,,That's How StinkBud Does His,Think He Said He See Root's In 6 To 7 Day's????

You Are Right On With The Timer-Of-The-Pump,,,,,,That Will Keep Them Wet, & Give Them Time To Breath,,,,,After About 10 To 14 Day's When They Have Good Root Stucture, You can move The Timer To Every 2-Hour's 15-Minutes On,,,,,Then After A Week You Can Move It To Every 4-Hour's 15-Minutes On..

Well, Congrate's On The Great Break-Through,,,,,,,,& Best Of Luck,,,As Alway's,,,,,Later,,,HATCH

Click to expand...

LoganSmith said:

Hay thanks, the only thing I dont have is the bubble, I need to get some tubing.[/quote

Yes, That Is A Must,,,,& The More Bubbles The Better!!!!!

Click to expand...

HATCH said:

LoganSmith said:

Hay thanks, the only thing I dont have is the bubble, I need to get some tubing.[/quote

Yes, That Is A Must,,,,& The More Bubbles The Better!!!!!

Click to expand...

You never said how much water you put in your pod, and what you put in it, how often should I change the water?
Or maybe you did and I just wasn't paying attention.

Click to expand...

LoganSmith said:

HATCH said:

You never said how much water you put in your pod, and what you put in it, how often should I change the water?
Or maybe you did and I just wasn't paying attention.

Click to expand...

OOO Sorry, I Fill It Up To The Mister Bar,,I Don't Go Over Them, But Up To Them,,,,My Mister Bar's Are About A 1" Below The Basket's......I Change The Water In The Res's, Every 10-Day's,,,,,,,If You Are Just Speaking Of The Cloner's?????,,,,,,,The First 10-Day's Is Just Tap-Water,,,,,,,,Then I PH The Water & Add The Nut's .....Then After They Are Rooted, If I Have A Site Open, I Will Move It,,,If Not, I Will Veg. Them In The Aero--Bubbler's, Till I Can Move Them To The Aeroponic's Pod's......Then When The Bubbler Is Empty Again,,,,I Repeat,,,& Repeat!!!,,,Nice!!!

Man I Have Been Researching Like Crazy Here Lately, To Try & Figure The Best Possible Way To Control The Heat In This Heat-Wave,,,I've Got 3-Cooltube's, & About 1,400 Worth Of CFM, In Fan's & Blower's, To Get The Heat Exhausted Through & Out Of My Chamber's!!!!!!,,,,,If I Can Get Every-Thing Back To The Low 80's,,,,That Will Be Great!!!,,,,,,,& I Will Be Able To Control Some Nice Lower Temp's In The Cooler Month's!!!!!!,,,,,You Guy's In The Lower Climate's!!!!!,,Just Don't Know How Nice Ya'll Have It!!!!,,,,,,Man I Wish I Had A Place Like This In The Mountain's Of Canada!!!!!,,,,,,,,Maybe One Of These Day's?????,,,,Our No!!,Damn It!!!

Click to expand...

HATCH said:

LoganSmith said:

OOO Sorry, I Fill It Up To The Mister Bar,,I Don't Go Over Them, But Up To Them,,,,My Mister Bar's Are About A 1" Below The Basket's......I Change The Water In The Res's, Every 10-Day's,,,,,,,If You Are Just Speaking Of The Cloner's?????,,,,,,,The First 10-Day's Is Just Tap-Water,,,,,,,,Then I PH The Water & Add The Nut's .....Then After They Are Rooted, If I Have A Site Open, I Will Move It,,,If Not, I Will Veg. Them In The Aero--Bubbler's, Till I Can Move Them To The Aeroponic's Pod's......Then When The Bubbler Is Empty Again,,,,I Repeat,,,& Repeat!!!,,,Nice!!!

Man I Have Been Researching Like Crazy Here Lately, To Try & Figure The Best Possible Way To Control The Heat In This Heat-Wave,,,I've Got 3-Cooltube's, & About 1,400 Worth Of CFM, In Fan's & Blower's, To Get The Heat Exhausted Through & Out Of My Chamber's!!!!!!,,,,,If I Can Get Every-Thing Back To The Low 80's,,,,That Will Be Great!!!,,,,,,,& I Will Be Able To Control Some Nice Lower Temp's In The Cooler Month's!!!!!!,,,,,You Guy's In The Lower Climate's!!!!!,,Just Don't Know How Nice Ya'll Have It!!!!,,,,,,Man I Wish I Had A Place Like This In The Mountain's Of Canada!!!!!,,,,,,,,Maybe One Of These Day's?????,,,,Our No!!,Damn It!!!

Click to expand...

Just get one of those 2050 cfm intake fans that should take care of it

Click to expand...

LoganSmith said:

HATCH said:

Just get one of those 2050 cfm intake fans that should take care of it

Click to expand...

Ya, That Would Be Nice If It Was That Simple!!!!!,,,,,,,All The Light's Run At Different Time's,,,,So I Have to Section Everything Out To All The Different Chamber's,,,,And I'm Doing The CoolTube's Totally Separately From All The Other Intakes & Exhaust's,,,,,,,,It's Has Taken Some Research to Figure The Best Way, & The Hot Air From The Light Can Never Be In Your Grow Space...,,,,Then The intaking & Exhausting Of just The air in The Grow Space's Is Easily Controlled...I Was Alway's Under The Impression That If Ya, You Suck Enough Out That It Will Keep Cool????,,,,,,,But When It's 100+ Outside, & It's Harder To Cool Anything & Everything Inside,,,,,,I've Been Able To Get Away With That Method,,,,,,But Just Felt Like There Is A Easier Way????,,,,,,,,& Now I Have Found It!!!!,,,,The Light Make All The Heat,,,,,So Never Allow That Heat To Be In The Grow Room, So I'm Going To Get Air From Outside Of The Chamber's, Push & Pull Through The CoolTube's & Out Through The Attic To Outside,,Eventaully That Will Be x 5, But Right Now I'm Doing Three Chamber's. Each CoolTube Will Have 235cfm Axail Pushing & A 95cfm Active Air Squirrel Fan Pulling, & I'm Adding Another 465cfm Active Air Squirrel Fan To The Flower Chamber's Exhaust System....& I Hope To Get Everything Back To A 78* Peak!!!!~~~~~& Not Give Flying Fuck How Hot It Is Outside!!!!!

But Any-Way,, I'm Having Fun,,& Fine Tunning All The Timer's Is Worth About 10-Bong-Hit by It's Self!!!!HEHEHEHE

P.S.How Are The Clone's Looking????

Click to expand...

HATCH said:

LoganSmith said:

Ya, That Would Be Nice If It Was That Simple!!!!!,,,,,,,All The Light's Run At Different Time's,,,,So I Have to Section Everything Out To All The Different Chamber's,,,,And I'm Doing The CoolTube's Totally Separately From All The Other Intakes & Exhaust's,,,,,,,,It's Has Taken Some Research to Figure The Best Way, & The Hot Air From The Light Can Never Be In Your Grow Space...,,,,Then The intaking & Exhausting Of just The air in The Grow Space's Is Easily Controlled...I Was Alway's Under The Impression That If Ya, You Suck Enough Out That It Will Keep Cool????,,,,,,,But When It's 100+ Outside, & It's Harder To Cool Anything & Everything Inside,,,,,,I've Been Able To Get Away With That Method,,,,,,But Just Felt Like There Is A Easier Way????,,,,,,,,& Now I Have Found It!!!!,,,,The Light Make All The Heat,,,,,So Never Allow That Heat To Be In The Grow Room, So I'm Going To Get Air From Outside Of The Chamber's, Push & Pull Through The CoolTube's & Out Through The Attic To Outside,,Eventaully That Will Be x 5, But Right Now I'm Doing Three Chamber's. Each CoolTube Will Have 235cfm Axail Pushing & A 95cfm Active Air Squirrel Fan Pulling, & I'm Adding Another 465cfm Active Air Squirrel Fan To The Flower Chamber's Exhaust System....& I Hope To Get Everything Back To A 78* Peak!!!!~~~~~& Not Give Flying Fuck How Hot It Is Outside!!!!!

But Any-Way,, I'm Having Fun,,& Fine Tunning All The Timer's Is Worth About 10-Bong-Hit by It's Self!!!!HEHEHEHE

P.S.How Are The Clone's Looking????

Click to expand...

Ya I figured that it wouldn't be that simple but would put it out there anyone

As for the cuttings there is no roots yet but I will keep you updated.

Peace-

Click to expand...

LoganSmith said:

What going on Hatch???

I still don't have any roots popping yet. But there not dead...

Click to expand...

HATCH said:

MMMMMMM,,,That's Odd!!!!,,,,,,It's been Over 14-Day's Right????,,,,,,,I Start Seeing Bump's at 3-Day's & Everything Will Be Fully Rooted In 7-Day's!!!!~~~~Well It Is A Good Thing That They are Still Alive!!!!

In All The Different Way's You Cloned,,,There Are Nun, With Root's????

Can You Get Some Pic's???,,,,Of The Plant's & The Stem In The Basket's????,,,,,,What Are The Temp's????,,,Water & Area????,,,,,Is The PH Real High????

Don't Give Up On Them!!!,,,,,,,,Well Figure It Out!!!

Click to expand...

LoganSmith said:

Not one is popping in any of the different types. I don't have any time to take pics, but when I do I will drop you a line.

Normally it is taking 20 days for the roots to pop. The strand is Grape Ape. Any info???

Click to expand...

camaro630hp said:

wow lot of work im to lazy great job

Click to expand...