Harvest a Pound Every Three Weeks!

M

milkchoca

Member
Im not ever sure if stinkbud even responds to this post anymore but I would like to know its possible to turn his stinkbud unit into an HPA or is his way better than HPA???
 
andrewcovetsall

andrewcovetsall

Active Member
drekoushranada said:
So would rapid rooters be fine?
Click to expand...
it dont matter what you use. you could pop a hole in a jiffy pellet, rockwool, styrofoam, it dont matter. i usually just drop the seed in whatever (F the paper towels) and wait and see. i have a 3 inch netpot nft system going right now and believe me. the plants dont care about what they get started in. i have some plants in 6 inch rockwool with roots longer than your arm. and other plants in 6 inch rockwool just by itself. same size buds, same size plants. sorry im off topic, somehow got started talking bout rootmass.....
 
W

wonin

Member
hi

im from UK and was wondering where i could get those rubbermaid buckets to make my own aeroponics veg buckets or a good UK water tight version as i cant find decent buckets/ resevoirs anywhere. Im currently using an amazon twin 32 for flowering which cost me £300 and a xstream for clones but ya cant even buy an aero veg table even if i did have the money.

any help greatly appreciated
 
W

wonin

Member
..............also anyone know where i could get a UK 1min timer as my aerotbale currently on constantly as UK only has 15min timers
 
JimmyT

JimmyT

Well-Known Member
W

wonin

Member
Thanks fror the reply Jimmy but my problem is they wont deliver to UK or are looking over 100pounds ($160) delivery from USA
 
RollaP

RollaP

Well-Known Member
I have 27 Strawberry Haze in an AP on its second week of flower. The roots have started to grab sprayers and rail sprayers are mounted on, should I or could I cut the roots without much damage to end product? And, if so how much do I cut?
 
andrewcovetsall

andrewcovetsall

Active Member
blocking the sprayers? idk. aeroponics, dripping water, dwc, idk if i have seen a difference. ive been doing hydro now for 3 years and they all seem so totally independent on the health and condition of your reservoir. but ya, sorry, im lit, if they block the flow, they gotta go. because the roots grow, where there is.....
 
RollaP

RollaP

Well-Known Member
andrewcovetsall said:
blocking the sprayers? idk. aeroponics, dripping water, dwc, idk if i have seen a difference. ive been doing hydro now for 3 years and they all seem so totally independent on the health and condition of your reservoir. but ya, sorry, im lit, if they block the flow, they gotta go. because the roots grow, where there is.....
Click to expand...
They're not showing any signs of stress or root damage, I more was wondering how much, if any, I can shave back the roots without damaging my plants.
 
andrewcovetsall

andrewcovetsall

Active Member
my advice is to try it and see. i think cutting your roots is a bad idea but if you have to, do a small section to see if your plant responds.
 
adamhew77

adamhew77

Member
RollaP said:
I have 27 Strawberry Haze in an AP on its second week of flower. The roots have started to grab sprayers and rail sprayers are mounted on, should I or could I cut the roots without much damage to end product? And, if so how much do I cut?
Click to expand...
The roots are tied directly to its counter part above ground if u cut root it will cause the health of that particular counter part to lose health dramatically...in which nutes will be redirected from other places to compensate therefore weakening the health of the whole...small pieces are not really noticed I had a root go down my drip line end and I pulled that kinda stuff with no problems at all ... u should have no noticeable change if it is a smaller secondary root but don't mess with the tap root you'll most likely lose the whole thing:-P:leaf:
 
RollaP

RollaP

Well-Known Member
adamhew77 said:
The roots are tied directly to its counter part above ground if u cut root it will cause the health of that particular counter part to lose health dramatically...in which nutes will be redirected from other places to compensate therefore weakening the health of the whole...small pieces are not really noticed I had a root go down my drip line end and I pulled that kinda stuff with no problems at all ... u should have no noticeable change if it is a smaller secondary root but don't mess with the tap root you'll most likely lose the whole thing:-P:leaf:
Click to expand...
Thanks guys. Sound advice. I tried with one initially and it was obviously stressed so I will just deal with it this cycle. Maybe I'll switch from round 6" pvc to 6" x 6" fence posts then mount sprayers in upper corner...
 
M

muchogood

Active Member
wonin said:
hi

im from UK and was wondering where i could get those rubbermaid buckets to make my own aeroponics veg buckets or a good UK water tight version as i cant find decent buckets/ resevoirs anywhere. Im currently using an amazon twin 32 for flowering which cost me £300 and a xstream for clones but ya cant even buy an aero veg table even if i did have the money.

any help greatly appreciated
Click to expand...
Wonin, any container that is light proof and water tight will work as the res in a veger. You could use 20 liter buckets for the top chamber. Maybe 2 ice chest's stacked?. Possibilities are endless. You have to think outside of the box sometimes.
About your timer, I convert our $10US. 15/15 timers to run 40 sec on and 4 min +/- off. Never messed with a European 240 V timer tho. I could prolly figure it out tho. Problem is shipping overseas. BTW some have been using 15/15 with some success:joint:
 
coonword

coonword

Active Member
muchogood said:
Wonin, any container that is light proof and water tight will work as the res in a veger. You could use 20 liter buckets for the top chamber. Maybe 2 ice chest's stacked?. Possibilities are endless. You have to think outside of the box sometimes.
About your timer, I convert our $10US. 15/15 timers to run 40 sec on and 4 min +/- off. Never messed with a European 240 V timer tho. I could prolly figure it out tho. Problem is shipping overseas. BTW some have been using 15/15 with some success:joint:
Click to expand...
how do you convert the us timers?
 
Rushed

Rushed

Active Member
I freeze 2 liter soda bottles, I tye a string on them and just switch them out daily. lowers temps pretty good.

petersonscott79 said:
I am waiting for the products to get here early next week. I did insulate the outside of the rez with reflectex (sp) and start using black garbage bags inside the rez to help with light control and cleanup and that has helped stabilize the temps some and the ph but I am running the room temp at 68-70F. With that room temp, I am seeing 68-70F rez temps and that was without the fan blowing directly on them. I did turn the fan so now it points right at the clone unit so hopefully that helps too.

I would like to run the temp in the room at 75-80 since I am running CO2 and would get some great growth but I just don't see how I could do that and keep the rez temps down. I guess we will see how the beneficial tea works out.

I just hope I can use the tea with this setup with no problems.
Click to expand...
 
P

petersonscott79

Member
Rushed said:
I freeze 2 liter soda bottles, I tye a string on them and just switch them out daily. lowers temps pretty good.
Click to expand...
I did almost the same thing. At first, I tried the small blue Coleman ice packs tied together and that failed miserably! The packs were just to small so I switched to 2 liters and then 20 oz bottles and then finally ice probes. The bottles worked but the temp change was to drastic (mid 50s to high 60s), not to mention the bottles being a pain in the ass especially if you wanted to go away for the weekend or something.

I have 1 probe in the cloner and 2 in the veg. I have the cloner probe on a timer so it stays about 68-70 degrees and the veg is about 62-65 degrees. I am thinking about trying to dial in 67-68 with a timer on the veg but we'll see.

I have had bad luck with this entire grow. I have mites so I just got some predatory mites and things look better but its tough to tell the difference between the mites.

I had a 10 week old headband that was very nice looking about 2 weeks shy of harvest start smelling almost sour so upon inspection I found what looked like mildew (not 100% but pretty sure), so I cut her and got her the hell out of my tent. I cut and opened a few of the real sour smelling nuggets and didn't see it inside the bud but it had it on the leaves. It was a gift that was in soil and a complete hassle with my flower unit it there and lack of space.

Now that I have my veg unit really kickin, my clones are having probs. They were abused in the beginning of my grow a bit and I lost a handful. I brought the top of the unit into the bathroom when I was cleaning the unit with bleach (door shut). The next day, about 3 plants looked sad and then another would and so on until about 7-9 went under (leaves shriveled up and fell off).

I consider myself & my op very clean and well taken care of and I still got mites. I guess that is what you get when you start off with clones from a buddy... :(

I will shut up now before this becomes a 2 page post but thanks for the advice either way.

Take care,
 
godhand

godhand

Well-Known Member
hello, like many others im inspired to grow now after seeing your setup. i have some questions that i cant find or am confused about.
info on the room n gear: at first im going to have 2x 600w hps with 2 systems in a smaller area.. maybe like 6x6x10 room sealed.. then i will upgrade later to a 10x10x10 with 3-4 systems (sealed), but i want to buy my things according to the 10x10x10 so i dont have to buy it again unless needed.

1- im growing in a 10x10x10 room (sealed) and im going to have 3-4 systems in it. how many cfm does my fan {set up: scrubber >> fan >> outside} needs to be to get rid of the smell most efficiently? i hear like 450min and 800 with a speed control, but 450 will be more than enough.... what do you recommend?

2- would it be best if i connect all 4x 600w hps lights to one exhaust fan or have 2 fans and hook up only 2 at a time and exhaust the heat? {Set up for one: fan >> 600w >> 600w >> outside} or {set up for all 4: Fan >> 600w >> 600w >> 600w >> 600w >> outside} whats the best way to do it? what do you think i should do?

3- according to the cfm u tell me, how big should my carbon scrubber be for the fan? and how much cfm do i need for my lights exhaust?

4- how tall to you start you plants flowering? 12inches? and how tall will they get when done flowering? i know it depends on stain, ill be growing pineapple express. lol it says it stay short to medium. and flowers in 2 months

5- is it better for me to have a passive air intake or forced air by fan from the outside in?
and according to the cfm for my scrubber exhaust, what cfm should i have for my intake if forced air is favored?

6- thats it for now XD but if theirs anything i should know, like any mistakes usually novices make. please do tell :P

thanks a lot and sorry for asking so many questions.
 
You must log in or register to reply here.
Top