help with setup

Elliesdaddy

Elliesdaddy

Active Member


    • I have a 250w cfl and it is a huge light bulb...since i didnt get a reflector i got a e40 plugin attachment what ways does anyone suggest to hold it up? if i use strings will it burn through the strings etc? i have no choice but to tie it directly contacting the bulb to hold it at a vertical angle so any advice? i dont want the bulb to burn through the string fall and then smash into loads of pieces​


      ​
    ​


    ​
 
bullwinkle60

bullwinkle60

Well-Known Member
Pictures of what your talking about would be helpful. I use CFLS and am always looking for a beter way to hang them.
 
Sunbiz1

Sunbiz1

Well-Known Member
That's why I use 42W 6500K bulbs to veg(smaller and available at Menard's Home Centers). That bulb you have is a monster. I doubt it will burn through, but there has to be a better way of installing it...of course we need pics to see what you did.
 
Elliesdaddy

Elliesdaddy

Active Member
unable to show pics at the current moment, but i turned it on to test it and after half hour it was very hot, not sure if my ez rollers would support the temperature without tearing i would say its worth a try but its not really when the bulb can just rip...
when do i need to have the light on the plants? they are currently tiny stems which have just sprouted still with the seeds on the tip of them stems
 
Sunbiz1

Sunbiz1

Well-Known Member
Elliesdaddy said:
unable to show pics at the current moment, but i turned it on to test it and after half hour it was very hot, not sure if my ez rollers would support the temperature without tearing i would say its worth a try but its not really when the bulb can just rip...
when do i need to have the light on the plants? they are currently tiny stems which have just sprouted still with the seeds on the tip of them stems
Click to expand...
Minimal lighting is fine, no need for high intensity at this stage...but I need to retract my previous comment in part. That bulb will burn through/weaken any fabric touching it over time.
 
JadeJealousy

JadeJealousy

Member
I imagine the e40 socket has to have some kind of base to it; why not just screw it onto a piece of wood, then use eye hooks to tie it up and suspend it.

Another idea is, if you wanna do some work, make a triangle out of 3 2x4s.

Here, I drew it in paint!

Bulb Holder.jpg

Basically, screw the socket onto the wood triangle with two U-Bolts, the bulb is free to float in the middle, and the eye hooks give you a place to tie the light up.

I also discovered I'm God-awful at paint and should never try drawing with it.
 
Sunbiz1

Sunbiz1

Well-Known Member
JadeJealousy said:
I imagine the e40 socket has to have some kind of base to it; why not just screw it onto a piece of wood, then use eye hooks to tie it up and suspend it.

Another idea is, if you wanna do some work, make a triangle out of 3 2x4s.

Here, I drew it in paint!

View attachment 1950878

Basically, screw the socket onto the wood triangle with two U-Bolts, the bulb is free to float in the middle, and the eye hooks give you a place to tie the light up.

I also discovered I'm God-awful at paint and should never try drawing with it.
Click to expand...
I like the idea, in fact I'll be using it when I add more bulbs after the holidays.

TY!

Edit: I found a cable for those bulbs as well:
http://www.enviro-gro-lites.co.uk/LAMPHANGER.asp
 
WeedChip

WeedChip

Active Member
Don't let the bulb float around, my 125 watt bulbs are too heavy for a standard socket, I've used electrical wire to support mine (wrapped around a screw and tightened), the socket is screwed into wood as described.
 
Elliesdaddy

Elliesdaddy

Active Member
Jade thank you so much exactly what i needed, its currently being held by the string of my ez rollers from my 600w hps but im definately going to do that great idea!
they are currently sprouting well will be doing a grow journal week by week feel free to add me as a contact/friend and follow
 
Sunbiz1

Sunbiz1

Well-Known Member
WeedChip said:
Don't let the bulb float around, my 125 watt bulbs are too heavy for a standard socket, I've used electrical wire to support mine (wrapped around a screw and tightened), the socket is screwed into wood as described.
Click to expand...
So it will unplug itself if left upside-down?.
 
Elliesdaddy

Elliesdaddy

Active Member
I think thats what he means but thats not the case here it is not upside down the ez rollers are completely support its weight vertically just above the seedlings
 
JadeJealousy

JadeJealousy

Member
I would be terrified of having it hang from just the socket. Even with tape, It could easily unplug and fall and break or burn the plants and mess up their light cycle.
 
Elliesdaddy

Elliesdaddy

Active Member
JadeJealousy said:
I would be terrified of having it hang from just the socket. Even with tape, It could easily unplug and fall and break or burn the plants and mess up their light cycle.
Click to expand...
Maybe with a big cfl like i have but smaller cfl's should not be a problem even without tape
 
JadeJealousy

JadeJealousy

Member
Oh no, your right on that; smaller ones shouldn't be a problem.

In fact, I've see a few growers user hanging work lights for their cfl (obviously removing the protective cage) which gives them a hanging socket AND a hanging outlet to plug in other stuff.
 
Elliesdaddy

Elliesdaddy

Active Member
JadeJealousy said:
Oh no, your right on that; smaller ones shouldn't be a problem.

In fact, I've see a few growers user hanging work lights for their cfl (obviously removing the protective cage) which gives them a hanging socket AND a hanging outlet to plug in other stuff.
Click to expand...
Yes some growers are very imaginative, a friend of mine has designed what i guess i would describe as a stealth grow box just not stealthy which is a fish tank with the lights, aeroponics, dripper system the whole lot, we just haven't come around the time or money to experiment with that yet although i may do one day as its a great idea.
 
You must log in or register to reply here.
Top