snappy
Active Member
Hello Everybody,
I have learned so much from this site, that in gratitude, I wanted to post the following hoping it will help somebody somewhere...
please feel free to chime in whith your Questions, Comments and / or concerns as any and all help will be apreciated.
Note for all the Newbies...
if you are planning to grow indoors be ready to invest on a Ballast, in my opinion you can save 50% by buying a Conversion Ballast for both MH an HPS lights.
Note to all who Read...
IF you hit a Road Block...USE YOUR IMAGINATION.
I'll Post a supply and expense list when it's all said and done.
here we go.
To tell you the truth before I joined this site my box looked like this...
Young and Inexperienced...
anyway I got my inspiration from a guy named "Stratlogic" <-- Good Looking out!!! from another site if you want to see his setup
http://www.420magazine.com/forums/cabinet-closet-grow-room-setup/65884-grow-box-construction.html
anywho.. I started by simply taking EVERYTHING apart one screw at a time.
once I had all the components separated it was time to start re-building so here we go...
after I deciced where my fans were going to go I thought it would be easier if I made the wholes first.
This is my Back Panel,For the intake I will place a 6" Fan that will end up in Lower left corner (picture is shown from Back)
For Exaust I will use a 4" Fan, I placed this in the middle top Part for 2 reasons One because of course, heat rises, but second I am hoping this will help suck the heat from the light.
time to place the fans.
I have learned so much from this site, that in gratitude, I wanted to post the following hoping it will help somebody somewhere...
please feel free to chime in whith your Questions, Comments and / or concerns as any and all help will be apreciated.
Note for all the Newbies...
![Weed Leaf :leaf: :leaf:](/styles/smilies/weed.gif)
Note to all who Read...
![Weed Leaf :leaf: :leaf:](/styles/smilies/weed.gif)
I'll Post a supply and expense list when it's all said and done.
here we go.
To tell you the truth before I joined this site my box looked like this...
![](/proxy.php?image=http%3A%2F%2Fi24.photobucket.com%2Falbums%2Fc19%2Fsnappyloco%2Fplant%2Frollitup%2F1_Rough_Draft.jpg&hash=012ab90d273370f07bbb8a2f0c4f5aae)
Young and Inexperienced...
anyway I got my inspiration from a guy named "Stratlogic" <-- Good Looking out!!! from another site if you want to see his setup
http://www.420magazine.com/forums/cabinet-closet-grow-room-setup/65884-grow-box-construction.html
anywho.. I started by simply taking EVERYTHING apart one screw at a time.
once I had all the components separated it was time to start re-building so here we go...
after I deciced where my fans were going to go I thought it would be easier if I made the wholes first.
This is my Back Panel,For the intake I will place a 6" Fan that will end up in Lower left corner (picture is shown from Back)
![](/proxy.php?image=http%3A%2F%2Fi24.photobucket.com%2Falbums%2Fc19%2Fsnappyloco%2Fplant%2Frollitup%2F2_Intake_Hole.jpg&hash=df21cafe1a711e572aae70ef3f4fbb06)
For Exaust I will use a 4" Fan, I placed this in the middle top Part for 2 reasons One because of course, heat rises, but second I am hoping this will help suck the heat from the light.
![](/proxy.php?image=http%3A%2F%2Fi24.photobucket.com%2Falbums%2Fc19%2Fsnappyloco%2Fplant%2Frollitup%2F3_Exaust_hole.jpg&hash=55ce628638ac541569786c9cbe5def0e)
time to place the fans.
![](/proxy.php?image=http%3A%2F%2Fi24.photobucket.com%2Falbums%2Fc19%2Fsnappyloco%2Fplant%2Frollitup%2F4_exaust.jpg&hash=741d052ba65e24f15dc3ea941f6b4ed3)