Idea for grow room setup?

Hi guys. Will this work and will and isomax 900 blowing through x3 8" cool tubes holding 3 x 400hps' be sufficient. Sorry I did write a long post but when trying to upload the pic the program crashed lol.

Man just a tip, i know ive done this before but...
Go to the picture file on your computer and use the windows picture viewer to rotate the picture before you upload it. Save some ppls necks ya?
And doesnt it suck when that happens lol.
Whats the isomax 900 ? Like what size fan? Im gonna assume 6' cuz thats what size your tubes are..
I'm not entirely sure at all but i have a feeling you are going to need more ... those 3 hps lights are gonna generate quite a bit of heat.

it's a 900m3 per hour fan and no it's an 8" my tubes are actually 8" too, sorry my mistake.

Yeah I've tried rotating it but it just flips it the other way. I don't know why it keeps doing it.

I was thinking of using the 10" isomax as they do a 1500m3 and a 2350m3 per hour in 10" size. I figured I'd get the 2350 and force it down the 8" tubes just to be sure. I know it's not the most efficient but it would still probably run at 1500m3 per hour even with the resistance from the tubes and the distance the air has to run.

dude that will be fine. A 200cfm fan can cool a 600w pretty good so I think your good,

Which exactly fan will be fine? Also, fine may not cut it. These plants will be practically touching the edge of all the shades. I need this to be overkill to make sure.

overkill? ok then go with the one you mentioned

That fan will get the job done, you'll probably be able to get real close to the tops like you're wanting.

I gotta say I'm very tempted to bang x4 600 eye hortilux hps's up there in Fresco water cooled tubes.

What do you guys reckon?

sure why not

sdf said:

sure why not

Click to expand...

Yeah I'm doing it in April/ May. Gonna be a bitch to install cos I've got to mess around with the roof insulation a lot with the whole place full right up with plants.