New Grow Room Build! XD

Ok, so with my tax return this year I decided to stop with the small closet and go legit. So I have made a list of everything I want to purchase and figured I would run it through here for everyone's opinions before I purchased everything this coming Friday. :D

Equipment:
- CAP GEN Pilot Light Natural Gas CO2 Generator
- Energy Efficient & High Performance Circular In-Line Duct Fan 6"
- ACF16 Active Air 16" Wall Mountable Oscillating Hydroponics Grow Fan X2
- 6" Dust Shroom
- 6" Coconut Shell Activated Carbon Charcoal Filter
- 400 watt MH Grow Light System Set
- 10" x 25' Panda Film Black and White Poly Pandafilm
- 10,000 BTU Scratch & Dent Silver Portable Air Conditioner Unit
- 6" x 16' Flexible Ducting Hose +2 Clamp Inline Fan Blower Filter Exhaust Duct
- Wattage: 1000w Thunder Digital Ballast X2
Reflector: 6" Cool Tube Air Cooled Reflector
Bulbs: High Pressure Sodium (HPS) Bulb Only
Hangers: 1/8th Ratchet Rope Hangers
- Grow Room Dehumidifier
- CAP AIR-4 CO2 Atmosphere Temp Humidity Controller Air 4
- Growing Tent Box Room Greenhouse System Mylar 8' x 4' x 6'8"
- Growing Tent Box Room Greenhouse System Mylar 3' x 3' x 6'8" (Mothers/Clones)
- 6" VENTS Flange + Coupler X2
- Growlab Equipment Hanging Board 15.75" x 78.74" X2
- Uvonair UV-In-Line - ozone generator



I plan on having the mothers and clones under the 400W in the smaller grow room that will bring in fresh air and then vent into the flowering room where the air will be circulated through the room and out the filter to finally go the the Uvonair.
I will have a fan on either end of the flowering room, and one in the mothers room.
The 2 1000w HPS setups for the flowering room.
I will be having 4 trays in the flowering room each with their own res. Doing a flood n drain setup. I will be using my current setup as a guideline, which is a system following the harvest every two weeks idea. Only I will be up-scaling my current setup to take up the larger space.
all wires, CO2 tank, A/C, Inline fans, will be mounted on the outside of the room.

All opinions are welcomed, will the 2 1000W be enough for flower? the 1 400W enough for the mothers and clones? Advice? Things I should do differently? I am open to ideas. :)

Teddy
 

sfrjosh

Member
Hey man I just finshed my 2 room build. Look under my name u can see some of it there.
I have 2 room one flower one veg.
I was going to have the air go from the flower room to the veg room. But didnt work how I thought. I am currently using a single air handler connected to endless hot water tank. For heat. And for ac I just need a compressor. I have 2 thermostat one for each room. The problem I had with the air going to one room to the other is my veg room would be to hot or cold in compairs to the flower room.

So flower 77 but veg was 85-90.
So it would cool the veg but it would cool my flower room
Fliter 55-60 veg 75-77
So how I fix this was. I bought 2 always open dampers 6" and a microcontoler to communicate between the 2 thermostats and the air handlers.
I Belive this is the only way of doing this I wish u the best of luck
-sfrjosh
 
Hey man I just finshed my 2 room build. Look under my name u can see some of it there.
I have 2 room one flower one veg.
I was going to have the air go from the flower room to the veg room. But didnt work how I thought. I am currently using a single air handler connected to endless hot water tank. For heat. And for ac I just need a compressor. I have 2 thermostat one for each room. The problem I had with the air going to one room to the other is my veg room would be to hot or cold in compairs to the flower room.

So flower 77 but veg was 85-90.
So it would cool the veg but it would cool my flower room
Fliter 55-60 veg 75-77
So how I fix this was. I bought 2 always open dampers 6" and a microcontoler to communicate between the 2 thermostats and the air handlers.
I Belive this is the only way of doing this I wish u the best of luck
-sfrjosh
Ya I am planning on venting my mothers room into my flower room, so the opposite of what you did. :) I plan on keeping the rooms about the same temp as well. So I hope it works out, if not well I guess I have to set up two separate ventilation systems. haha
 

sfrjosh

Member
If you going to keep them same temp them u will be ok, it doesn't matter (flower to veg or veg to flower). but the reason i wanted mine independent is bc in my flower room i want to drop to 65-68 at night and last week or 2 i want to drop hummidy to help them seal up and crystal more :-) best of luck i would love to see ur set up :-)
 
If you going to keep them same temp them u will be ok, it doesn't matter (flower to veg or veg to flower). but the reason i wanted mine independent is bc in my flower room i want to drop to 65-68 at night and last week or 2 i want to drop hummidy to help them seal up and crystal more :-) best of luck i would love to see ur set up :-)
ohhhhhhhh I gotchya. Ya I will have plants in 4 different growing stages in my flower room, I have 4 trays of which every two weeks one tray gets harvested. :)

I will upload pics as and start a grow journal as things start arriving. XD
 
It is going great. Still getting stuff in the mail and finally had forst harvest from tge old room, the new one is being built withen the next two weeks while my vanilla clones root.
 
Top