Noob here, in need of setting up a 4x4 tent please HELP!

ok so this is what they sent me :

Please find attached test report.



If with heatsink, work temperature is 40 degree.

Without heatsink, work temperature is 50 degree.



You can use HLG-320H-48A to drive the PCB.



If you use Meawell driver, the efficacy can be reach 180lm/w.


We can do 3500K and 3000K sample for you, which one you like?



HLG-320H-48A drive one PCB, 48V, 6.7A, total: 321W.



How do you think of it and will I arrange them for you?



If any questions, please let me know.

Rita

Andrei_2012 said:

Actually for a week now research is all that i do I posted this cause im new on rollitup and didnt know where to start, But i am ready to research, im a fast learner. Just need someone to point me in the right direction.

So i should look for luminus setup. Thank you. I was thinkin for 6 vero looks to be a good setup. One driver 6 cobs. I dont know anything about Luminus. Someone knows where to purchase those?

Click to expand...

You called? Citizens 300w from Timbergrowlights and 260w Quantum Board

I third the CXM22 recommendation. I'm running 4 if those in a closet 39"x 27" give or take an inch. Yes it's hot in the middle but still have good spread @CobKits is the place to go. He is an advertiser here but that gives no weight to my suggestion. He is very knowledgeable and will help you put together a kit that will perform well in your space and on your budget..... Respectfully. I mean hey don't expect donkey dick buds that weigh to pounds running 1 cob50 W . If you buy things off of alibaba you have NO support.here is my present status. 5gal pots. The little one i saved from a flower pot it ended up being an Auto

Andrei_2012 said:

ok so this is what they sent me :

Please find attached test report.



If with heatsink, work temperature is 40 degree.

Without heatsink, work temperature is 50 degree.



You can use HLG-320H-48A to drive the PCB.



If you use Meawell driver, the efficacy can be reach 180lm/w.


We can do 3500K and 3000K sample for you, which one you like?



HLG-320H-48A drive one PCB, 48V, 6.7A, total: 321W.



How do you think of it and will I arrange them for you?



If any questions, please let me know.

RitaView attachment 4063043

Click to expand...

Hey did you ever get a light from them? I've been looking at the same exact light