OK I finally got pics! So what's your opinions?

VictorVIcious

VictorVIcious

Well-Known Member
IF IN DOUBT FLUSH IT OUT...FIRST. I see the beginning of nute burn on the back leaves towards the top of the picture, The deforming leaves indicate a problem. Does not matter what you have done the right first thing to do is flush it 90% of the time this will solve this type of problem. You do this by using 1/4 strength nute solution, and twice the watering capacity. It would be a good idea to put it in low light for a day or two as well. If it seems to be recovering go to 1/2 strength at the next water, and then assuming all is well back to full strength.
I hope this is the information you are looking for, do you have something about this posted somewhere other than this thread? VV
 
COD4

COD4

Well-Known Member
VictorVIcious said:
IF IN DOUBT FLUSH IT OUT...FIRST. I see the beginning of nute burn on the back leaves towards the top of the picture, The deforming leaves indicate a problem. Does not matter what you have done the right first thing to do is flush it 90% of the time this will solve this type of problem. You do this by using 1/4 strength nute solution, and twice the watering capacity. It would be a good idea to put it in low light for a day or two as well. If it seems to be recovering go to 1/2 strength at the next water, and then assuming all is well back to full strength.
I hope this is the information you are looking for, do you have something about this posted somewhere other than this thread? VV
Click to expand...
OK, thanks I will flush them today. This si the onl thread I have about the issue.


boooky said:
Is that mirrors? Or mylar? If those are mirrors they are burning your plants.
Click to expand...
No, it's mylar...
 
COD4

COD4

Well-Known Member
I went to the hydro store today. The guy told me it was probably either heat burn from my 1000w, temp too high in the room, or nute lockup.

So I bought some multivitamins and some nute unlocking shit. We will see what happens.
 
Smokez420

Smokez420

Active Member
I've had the very same problem on some of my NLxBB. I added way too much Lime when i mixed the soil and thought the PH was probably too high. I dont believe its a MG deficiency cause ive seen a MG def. before on my WW and it looked nothing like that. I flushed them and it helped stop the problem. Never did find out exactly what the problem was tho.
 
M

max1986

Active Member
you also need a min of 40 in from bulb o top of plant those mirrors ar amping that baby it's like sitting in a tanning bed for 18 hrs.
 
COD4

COD4

Well-Known Member
I was hoping for 1oz a plant.

Maybe I can get more, who knows.

I have a total of like 24 plants.

I just started them on 12/12 last week. So far I have 3 males and 5 females. It looks like I'll end up with 12 females at the very least, probably more. I'm going to kill the males tomorrow, I'm just waiting a little extra to make 1005 sure they're males before they meet the garbadge disposal.
 
psyclone

psyclone

Well-Known Member
I totally wish you luck- I keep trying for a gram per watt (250watt) in my little space - 0.8 per watt is the best to date, with 16 single stems.
(just under 1/2 0z per stem)
 
COD4

COD4

Well-Known Member
psyclone said:
I totally wish you luck- I keep trying for a gram per watt (250watt) in my little space - 0.8 per watt is the best to date, with 16 single stems.
(just under 1/2 0z per stem)
Click to expand...

1gram a watt? Isn't that kind of high? That means I would score a kilo off my 1000w setup ;o

I'm definetly not holding my breath for a key
 
You must log in or register to reply here.
Top