Quality or quantity

lbbongtoke

lbbongtoke

Well-Known Member
I just got my MM card :lol: and have found out that If you don't have mass quantities of meds stashed while your beans crack and grow, then you are limited to either Mexican rag weed or trying to find someone (with quality meds) that will part with smaller quantites. ( less than an oz ). Is anyone else having trouble getting medicated?
My jar is about mt and I have 4-5 weeks to veg and another 10 or so weeks to flower. I'm not going to make it. Whaaaaaaaaaaaaaaaaah!!!!!
 
BeaverHuntr

BeaverHuntr

Well-Known Member
No I never have that problem and there are clubs you can go to to get good meds if you can afford it. Craigslist will pull up some clubs.
 
Wolfhound

Wolfhound

Active Member
I've been doin' without for the past week & a half. Just can't afford the high prices as I tend to vape/toke a bit heavily. As the cat said when it got its tail caught in the door "It won't be long now!" Got paid yesterday so I can get a bit this week . . .
 
BeaverHuntr

BeaverHuntr

Well-Known Member
Wolfhound said:
I've been doin' without for the past week & a half. Just can't afford the high prices as I tend to vape/toke a bit heavily. As the cat said when it got its tail caught in the door "It won't be long now!" Got paid yesterday so I can get a bit this week . . .
Click to expand...
If you search you will find some good deals. My buddy found a dude with super Silver Haze 250 a zone.
 
Jack Harer

Jack Harer

Well-Known Member
Once you get the grow established, go from clones and you'll cut the time down. I see no reason that someone who grows should ever be without. I smoke all day and there is no way I could smoke all my shit between harvests.
 
BeaverHuntr

BeaverHuntr

Well-Known Member
Jack Harer said:
Once you get the grow established, go from clones and you'll cut the time down. I see no reason that someone who grows should ever be without. I smoke all day and there is no way I could smoke all my shit between harvests.
Click to expand...
True that. Save a bad ass looking mother..
 
Wolfhound

Wolfhound

Active Member
I wake up & kick myself for not getting this project off the ground sooner. I probably have 10 hrs work to get the room done but doing it alone means more days. I'm about to hang the ORCA reflective, almost everything else is done. Once up & producing I will not be in this situation for quite some time to come.
I could get 4 ozzies of mex for abt 220 , my normal monthly buy over the last decade, but decided months ago to move away from illegal to legal. I now do without except for once a month spending a hun or two for a week or twos worth, bummer. I have a hard time shuffling bills/meds on my fixed income.
On the bright side it looks like I MAY be ready for clones next week ! Hopefully my old buddy from junior/senior high & college will be down next week after finishing & winterizing His outdoor stuff in the triangle. I will then be set for the future & have an excellent seed selection too !
 
BeaverHuntr

BeaverHuntr

Well-Known Member
Wolfhound said:
I wake up & kick myself for not getting this project off the ground sooner. I probably have 10 hrs work to get the room done but doing it alone means more days. I'm about to hang the ORCA reflective, almost everything else is done. Once up & producing I will not be in this situation for quite some time to come.
I could get 4 ozzies of mex for abt 220 , my normal monthly buy over the last decade, but decided months ago to move away from illegal to legal. I now do without except for once a month spending a hun or two for a week or twos worth, bummer. I have a hard time shuffling bills/meds on my fixed income.
On the bright side it looks like I MAY be ready for clones next week ! Hopefully my old buddy from junior/senior high & college will be down next week after finishing & winterizing His outdoor stuff in the triangle. I will then be set for the future & have an excellent seed selection too !
Click to expand...
Did you order the Orca film on line? I hear some good stuff about Orca film. I used the refletix stuff when I had a walk in closet grow room and when I converted the whole bedroom I just went with Panda Film.
 
Wolfhound

Wolfhound

Active Member
There's a pretty impressive youtube vid that shows abt 30% or so more lumens reflected as compared to Mylar using a meter placed the same distances from each. You can visually see the difference too. Online ORCA was $189 for the 54 inch X 100 ft. I am all done with building my room except for moving the door (hinges)to the outside & applying the ORCA stuff. ASAP, maybe tonight.
The OSB is kinda tough stuff. I have no need to remove the orca since this is a permanent structure & if not growing then will be a storage area. I'm thinking about gluing it up to make it look better & easier too. Not sure so in a tailspin until I figure the best way for me to do it. I'm open to suggestions ! Otherwise, spray adhesive it is !
 
BeaverHuntr

BeaverHuntr

Well-Known Member
Wolfhound said:
There's a pretty impressive youtube vid that shows abt 30% or so more lumens reflected as compared to Mylar using a meter placed the same distances from each. You can visually see the difference too. Online ORCA was $189 for the 54 inch X 100 ft. I am all done with building my room except for moving the door (hinges)to the outside & applying the ORCA stuff. ASAP, maybe tonight.
The OSB is kinda tough stuff. I have no need to remove the orca since this is a permanent structure & if not growing then will be a storage area. I'm thinking about gluing it up to make it look better & easier too. Not sure so in a tailspin until I figure the best way for me to do it. I'm open to suggestions ! Otherwise, spray adhesive it is !
Click to expand...
Dude just staple that bitch and be done with it in about 30 min.
Yeah dude I did my research on that film you will definitely be getting some good reflection and better lumen output from your light. Damn I'm jocking that film.
 
Wolfhound

Wolfhound

Active Member
Well my heavy staple gun won't make a dent in the OSB so I started with spray adhesive. Got one piece up with wrinkles & tore the second piece out. Guess I'll give it another go tomorrow. A bitch trying to spray & stick a piece 54 X 100 inch alone ! Looks like I may break down & get someone to help me finish this up. The only thing I haven't tested is the Titan ebb/gro so it should be up & running REAL quick ! Haven't decided which Indica/Sativa strain to pick up clones of yet.

I have to say I was expecting the ORCA to be a woven type material but it is kinda like paper, expensive thick paperish stuff. At least it should perform well but must be waaaay overpriced.
 
BeaverHuntr

BeaverHuntr

Well-Known Member
Wolfhound said:
Well my heavy staple gun won't make a dent in the OSB so I started with spray adhesive. Got one piece up with wrinkles & tore the second piece out. Guess I'll give it another go tomorrow. A bitch trying to spray & stick a piece 54 X 100 inch alone ! Looks like I may break down & get someone to help me finish this up. The only thing I haven't tested is the Titan ebb/gro so it should be up & running REAL quick ! Haven't decided which Indica/Sativa strain to pick up clones of yet.

I have to say I was expecting the ORCA to be a woven type material but it is kinda like paper, expensive thick paperish stuff. At least it should perform well but must be waaaay overpriced.
Click to expand...
Use some sort of roller to press that film on flush ,
 
Wolfhound

Wolfhound

Active Member
IBBONGTOKE, I just realized a major hijack of your thread, I'll start another tthread if need be. Sorry bud !

I wish that would've worked but can't roll out these small wrinkles. What happened was I had my wife line up the bottom side but she decided to line it up near the middle. I stuck the top which was sprayed about 2 ft down the wall , well she had the bottom off by 1 1/2 inches & said nothing while I continued on until the whole piece went bad. No biggie, just amazed at how the simplest thing can go wrong. The main reason I have fought every step of the way while having only her help.
Possible good news is we are still married !
 
Wolfhound

Wolfhound

Active Member
Thanks, IBT
Got some meds last night, finally. Amazing what an attitude adjustment can do ! Now I can get back on track & won't have near the problems getting stuff done.
 
You must log in or register to reply here.
Top