1. We are currently experiencing issues with viewing and uploading images, our team is working on the issue.
    Dismiss Notice

Quantum Boards Grow

Discussion in 'LED and other Lighting' started by captainmorgan, Nov 18, 2016.

  1.  
    captainmorgan

    captainmorgan Well-Known Member

    Trying out a new LED set up, Quantum Boards.
    Using Samsung LM561C LED's.
    They are 80 CRI 3000k S5 bin.
    4 Panels draw 247 watts.
    Growing a Chaos 4x4.
     

    Attached Files:

  2.  
    BuddyColas

    BuddyColas Well-Known Member

    Shweeeet! Request...can you take a pick of the top side of the panel, and what do the PAR readings look like around the tent? I was going to say canopy, but that is a bit overstated just yet. Thanks.
     
    Stephenj37826 likes this.
  3.  
    captainmorgan

    captainmorgan Well-Known Member

    Boards are just riveted to a 24" square 1/8" thick sheet of aluminum, been running about 2 hours and only warm to the touch on the back. I'll be taking readings this weekend.
     
  4.  
    NapalmD

    NapalmD Well-Known Member

    Can't wait to see your results with these Cap. I think you'll like these a lot. Are you going to scrog?
     
  5.  
    captainmorgan

    captainmorgan Well-Known Member

    The Chaos 4x4 is a new generation and from seed. Looks like she is going to be short and stout structure so I'll just let her go natural with some clean up. Won't be vegging much more because it's a unproven pheno, I'll take clones and maybe scrog next time if she's a winner.
     
    Chronikool, pop22, Malocan and 6 others like this.
  6.  
    captainmorgan

    captainmorgan Well-Known Member

    Growing Chaos 4x4 in a 3x3 tent, just to eliminate any confusion.


    20161004_121916.jpg.f5831974d155675b1d1277c559367373.jpg
     
    Mohican, pop22, alesh and 4 others like this.
  7.  
    Evil-Mobo

    Evil-Mobo Well-Known Member

    Subbed. You beat me to it. I am waiting on Robin for my order of one for a go in a closet tent. Curious to see how this does for you. Thanks for sharing this. :hump:
     
    pop22 and Stephenj37826 like this.
  8.  
    CobKits

    CobKits Well-Known Member Rollitup Advertiser

    so whats the idea of the 4x4? to pheno hunt and backcross with F2s to eventually get to an IBL?
     
  9.  
    captainmorgan

    captainmorgan Well-Known Member

    I'm not a breeder but have grown the original Chaos clone and a BX2 from seed and now the 4x4 from seed, so far I prefer the BX2. My guess would be to stabilize the cross for more consistency among the seeds, I'm pheno hunting.
     
    Mohican and Stephenj37826 like this.
  10.  
    PSUAGRO.

    PSUAGRO. Well-Known Member

    I can't tell if their are any secondary optics on this nextlight v2?

    Good luck CM....... sounds like a crazy good strain
     
    salmonetin and pop22 like this.
  11.  
    captainmorgan

    captainmorgan Well-Known Member

    salmonetin, pop22 and PSUAGRO. like this.
  12.  
    mc130p

    mc130p Well-Known Member

    I did originally think that you were doing a 4' x 4' grow, lol
     
  13.  
    Yodaweed

    Yodaweed Well-Known Member

    Those lights aren't going to make much intensity, those look best for side lighting or a novelty item.
     
    Last edited: Nov 19, 2016
    VegasWinner likes this.
  14.  
    ChaosHunter

    ChaosHunter Well-Known Member

    Capt what driver are you using for the 4 boards ?
     
  15.  
    CobKits

    CobKits Well-Known Member Rollitup Advertiser

    well hes running them at 74W, they can do up to 200W each which can easily do a 2x2 with one board
     
    ChaosHunter likes this.
  16.  
    ThaiBaby1

    ThaiBaby1 Well-Known Member

    150 watts cobby
     
  17.  
    captainmorgan

    captainmorgan Well-Known Member

    HLG-240H-C2100A with the panels wired in parallel.
     
  18.  
    Fastslappy

    Fastslappy Well-Known Member

    got a diagram of the wire-up ?
    gonna build two of these set-ups of these 4 boards but with a 320 , I really like the no headroom these offer shelving rack grows ,looking at a double stack atm
    got the go ahead as it's my xmas present , she gets a new 2in1
     
  19.  
    Stephenj37826

    Stephenj37826 Well-Known Member Rollitup Advertiser

    I'll have @robincnn draw it up this evening. It's simple really.
     
    Mohican likes this.
  20.  
    ThaiBaby1

    ThaiBaby1 Well-Known Member

    Could not be simpler, just hook up the positive from the driver to the positive on the first board then connect the second positive to the next board and repeat. Same for negative.
     

Share This Page