Some help to fit my cobs to a tent.

Hey guys, an outside look to my doubt, I will appreciate the help.

I moved my old grow, and upgrade the the light system. I have 2 Tents idle, 2.5x2.5x6 (homebox Q80) and a 4x4x6.5 (Q120)
The light system, 5x CXM 22 G3 3k 80CRI - HLG 240h-54a and 3x CLU048 1212 3k 90CRI - HLG 185h-48A and all cobs are running near 45W. The tents are from an old setup with HPS, so I have already the fans, exhaust and filter.

My calculations, the Q80 will be 1200-1300 PPFD, and the Q120 550-600 PPFD. What setup you guys think will be best for production?

IMO: the 4x4x6.5 (Q120) is minimum,

just last week I helped a buddy with the same issue

we erected the 4x4 tent

hung 4 dog chains from the ceiling and

attached a light weight wood frame to that inside the tent

to the frame we attached the cobs

our next move is to have the frame on counterweights

so it slides up and down on a pulley thing

we are looking for the pully things now ...lol

good luck

vostok said:

IMO: the 4x4x6.5 (Q120) is minimum,

just last week I helped a buddy with the same issue

we erected the 4x4 tent

hung 4 dog chains from the ceiling and

attached a light weight wood frame to that inside the tent

to the frame we attached the cobs

our next move is to have the frame on counterweights

so it slides up and down on a pulley thing

we are looking for the pully things now ...lol

good luck

Click to expand...

can you use these?

Im using the yoyo but is rated only to 5kg-11lbs each. As using 4x, should not be a problem.

I thought those yoyo's are mainly for supporting branches, but I suppose they can hold anything. The ratchets i sent a pic of are 1/8" and can support 150lbs per pair.