mojoganjaman
Well-Known Member
lookin' to make some shatter....my buddy blasts' like I did in the late 80's...pvc tube...I want to use stainless...any info/help appreciated...
)
mojo
)mojo
stainless bho tube
- Thread starter mojoganjaman
- Start date
CalyxCrusher
Well-Known Member
If you want something cheap and quick use a stainless Turkey baster. The ones with the screw on injector tip is best. Thread on the tip, clip it with side cutters to fit your butane can. Pull the bulb off and add coffee filters and hold em on with a worm drive clamp. Only downside is their limited in size. But if ya fancy the idea i know most Loblaws tend to have em and theyre food grade safe so no machine oil residues
On a side note, they also make glass tubes for this purpose now
On a side note, they also make glass tubes for this purpose now
Last edited:
you can use a thermos.. 
Make a cap for the thermos and drill a small relief hole. and a hole directly in the certer of the opening to the thermos.
Put up to a half oz in the thermos..FROZEN OF COURSE... freeze the herb and thermos 12 hours before.
Blast a can or two into the thermos..let soak for a couple minutes... Pour out the liquid taine..
OUTSIDE lmao..
very simple unless you have a lot to do..
Make a cap for the thermos and drill a small relief hole. and a hole directly in the certer of the opening to the thermos.
Put up to a half oz in the thermos..FROZEN OF COURSE... freeze the herb and thermos 12 hours before.
Blast a can or two into the thermos..let soak for a couple minutes... Pour out the liquid taine..
OUTSIDE lmao..
very simple unless you have a lot to do..
GroErr
Well-Known Member
I don't do BHO or any chem based extraction any more. But the last time I ran some I did it in a martini shaker. If you want large volume, stainless, and cheap they're about the easiest to make a large capacity chamber with. They cost anywhere from $10-$20 and available everywhere.