vandettaz
Active Member
[FONT="]- Day Zero - Grow Introduction Summary [/FONT]
[FONT="] [/FONT]
[FONT="]This is my first indoor grow and my first post on here. Ive spent some time looking around the web for CFL grow guides and read lots about CFL type lighting.. Which doesnt amount to shit if you havent tried it in theory? So here goes nothing..lol[/FONT]
[FONT="] [/FONT]
[FONT="] [/FONT]
[FONT="]What im going to try and do is a full grow guide on what im doing and how I did it so any one interested can keep up with this over the next unknown about of time lol. So ive scouted a good location in my house which only I have real access too, its known as my bedroom. Because ive already built my box ahead of time before starting my journal there wont be any building pictures. Doesnt really matter since know two spaces are the same.. Ok heres a list of what my grow box has,.[/FONT]
[FONT="] [/FONT]
[FONT="]--> Inside Box[/FONT]
[FONT="] [/FONT]
[FONT="]4x 23w/125w 6500k+ Daylight Philips CFL[/FONT]
[FONT="]2x 18w/100w 2700k<3000k Warm white CFL[/FONT]
[FONT="]6x Light sockets with on/off switch with clips[/FONT]
[FONT="]1x 12" Inch 3 Speed Desk Fan[/FONT]
[FONT="]1x Power board with 5m cable[/FONT]
[FONT="]2x Cardboard Boxes[/FONT]
[FONT="]1x cooking foil[/FONT]
[FONT="]1x Sticky foil tape[/FONT]
[FONT="]2x Double sided tape [/FONT]
[FONT="] [/FONT]
[FONT="]--> Front/Door Panel[/FONT]
[FONT="] [/FONT]
[FONT="]4x 6ft lengths of small width wooden[/FONT]
[FONT="]4x 1" Square blocks[/FONT]
[FONT="]1x sheet of cardboard[/FONT]
[FONT="] [/FONT]
[FONT="]--> Air Flow/Exhaust (Not yet completed)[/FONT]
[FONT="] [/FONT]
[FONT="]4x PC Case Fans[/FONT]
[FONT="]1x Length of power wire[/FONT]
[FONT="]2x Power pack[/FONT]
[FONT="] [/FONT]
[FONT="] [/FONT]
[FONT="]I spent about $54 Dollars in supplies at my local Tesco not including the wood for my door panel as it was just scraps laying about my house and about 6hrs to assemble my grow area.. That includes stopping for joints along the way haha. I made all of my reflectors out of card board and stuck them to the wall using double sided foam tape. This box is built for growing 2-3 low ryder's at a later date. You get the idea.. All right [/FONT][FONT="]I[/FONT][FONT="] got 10 [/FONT][FONT="]bag seeds[/FONT][FONT="] of my local stuff which [/FONT][FONT="]I[/FONT][FONT="] will discuss about later after germinating and planting them.
[/FONT]
[FONT="] [/FONT]
[FONT="]This is my first indoor grow and my first post on here. Ive spent some time looking around the web for CFL grow guides and read lots about CFL type lighting.. Which doesnt amount to shit if you havent tried it in theory? So here goes nothing..lol[/FONT]
[FONT="] [/FONT]
[FONT="] [/FONT]
[FONT="]What im going to try and do is a full grow guide on what im doing and how I did it so any one interested can keep up with this over the next unknown about of time lol. So ive scouted a good location in my house which only I have real access too, its known as my bedroom. Because ive already built my box ahead of time before starting my journal there wont be any building pictures. Doesnt really matter since know two spaces are the same.. Ok heres a list of what my grow box has,.[/FONT]
[FONT="] [/FONT]
[FONT="]--> Inside Box[/FONT]
[FONT="] [/FONT]
[FONT="]4x 23w/125w 6500k+ Daylight Philips CFL[/FONT]
[FONT="]2x 18w/100w 2700k<3000k Warm white CFL[/FONT]
[FONT="]6x Light sockets with on/off switch with clips[/FONT]
[FONT="]1x 12" Inch 3 Speed Desk Fan[/FONT]
[FONT="]1x Power board with 5m cable[/FONT]
[FONT="]2x Cardboard Boxes[/FONT]
[FONT="]1x cooking foil[/FONT]
[FONT="]1x Sticky foil tape[/FONT]
[FONT="]2x Double sided tape [/FONT]
[FONT="] [/FONT]
[FONT="]--> Front/Door Panel[/FONT]
[FONT="] [/FONT]
[FONT="]4x 6ft lengths of small width wooden[/FONT]
[FONT="]4x 1" Square blocks[/FONT]
[FONT="]1x sheet of cardboard[/FONT]
[FONT="] [/FONT]
[FONT="]--> Air Flow/Exhaust (Not yet completed)[/FONT]
[FONT="] [/FONT]
[FONT="]4x PC Case Fans[/FONT]
[FONT="]1x Length of power wire[/FONT]
[FONT="]2x Power pack[/FONT]
[FONT="] [/FONT]
[FONT="] [/FONT]
[FONT="]I spent about $54 Dollars in supplies at my local Tesco not including the wood for my door panel as it was just scraps laying about my house and about 6hrs to assemble my grow area.. That includes stopping for joints along the way haha. I made all of my reflectors out of card board and stuck them to the wall using double sided foam tape. This box is built for growing 2-3 low ryder's at a later date. You get the idea.. All right [/FONT][FONT="]I[/FONT][FONT="] got 10 [/FONT][FONT="]bag seeds[/FONT][FONT="] of my local stuff which [/FONT][FONT="]I[/FONT][FONT="] will discuss about later after germinating and planting them.
[/FONT]
Attachments
-
26.6 KB Views: 29
-
159.9 KB Views: 52
-
160.1 KB Views: 24
-
174.7 KB Views: 33