Temperature is Ok? TEll me your POINT!!!

lacrossebh

lacrossebh

Well-Known Member
mr.homola said:
here are the pictures. U wont't be able to see the fan, because I couldn't fit it to unit so I burried it in to the chimney brest next to it and then I conected ducting from it to cupboard. I made it unaccesable but fuck it. If it goes I open that chimney again, but I doubt it. I just like my kitchen tidy.. About the smell. Well, I didn't get to flowering yet, but that filter looked man enough to handle the job. Input was 5 inches in diameter and filter itself was about 8 by 20 inches. And because it goes to chmney I am not worying about smell at al but it might be different case with you. But I think if you browse net, you can find all the info about the flow and how well it works which is what i did. Also I do have one more fan, just a small baby one (underneath microwave) blowing air in, but that one I don't use that often, because you can hear it and it drives me crazy. The one in chimney is much bigger but quiet. The small one I just turn on when I go to work just to make plants moving a bit to make them stronger. I would leave it on all the time if I knew it affects temperature but unfortunetly it doesn't.
hope it's any help to you...
and hope you have less yelow leaves than me...
cause it's a bloody science
Click to expand...

Thanks Mate...
Did you put the fan conect the lampa and is work fine???
I think in maybe buy one more 100mm fan...Because bro...Stil to up...
And I have talk with one guy if the lamps is to close to the plamts...is gonna burn and then the get yelow...He told me just put the hands close to the lamp and you gonna fell how is worm...is the same for the plant...

I relay got crazy Dude...

I just don't know if i gonna buy one more fan our if i buy one more bigger...and fuck...but here in Sweden is all To much exepensive...dude...
Fucking Shit....
One good fan is around 200 bucks, that i buy cost me 44 bucks...in one cheap place....
Our i don't know if i buy one more 100mm and put in the lamps like you...

Is work fine with you...

Thanks...man you help me alot!!
 
M

mr.homola

Active Member
yeah, it's not chaep. to pay for fan and filter cost me more than bloody lamp. But, than one of my mates has been sniffed out by cops... I've used glass tube called cool tube and air is drawn straight over bulb. But fuckin thing was too long for my cupboard so I kinda broke off half. Just.. And regarding that fan again. I did the same thing as you. Cheap light first than cheap fan. Than I tossed away cheap light and bought more expensive one and at the end I had to buy proper fan. Should do that on beggining. See, if you dont have a space like me, or you. You have to keep air moving and eve the big fan, when you run ducting more than a few meters, or not in a straight run you can reduce flow quite rapidly. So if you can buy the biggest fucker you can accomodate and afford and your temp will be sorted. I should buy bigger one myself, but I allready spent enough and I am just on limit of temp and it seems to be ok regarding heat. Bloody nutes are doing my head now!
 
lacrossebh

lacrossebh

Well-Known Member
mr.homola said:
yeah, it's not chaep. to pay for fan and filter cost me more than bloody lamp. But, than one of my mates has been sniffed out by cops... I've used glass tube called cool tube and air is drawn straight over bulb. But fuckin thing was too long for my cupboard so I kinda broke off half. Just.. And regarding that fan again. I did the same thing as you. Cheap light first than cheap fan. Than I tossed away cheap light and bought more expensive one and at the end I had to buy proper fan. Should do that on beggining. See, if you dont have a space like me, or you. You have to keep air moving and eve the big fan, when you run ducting more than a few meters, or not in a straight run you can reduce flow quite rapidly. So if you can buy the biggest fucker you can accomodate and afford and your temp will be sorted. I should buy bigger one myself, but I allready spent enough and I am just on limit of temp and it seems to be ok regarding heat. Bloody nutes are doing my head now!
Click to expand...
Yea Bro...for me My first point is got one grow by myself...But fuck...in the life we allways gonna have soon probelm...yea...
I gonna look up that...tomorow...I make all for this work...because here in sweden is all shit dude...babe weed, and to expencive for shit...
I gonna look this tomorow...But just how much money more i gonna burn for got my drems make tru...

Now i have one with 100mm...maybe one more 125mm...is gonna help me more yea...What you think??? our one more like the one i got and than i gonna have 200mm,..Our i realy need to buy one good shit??

Thanks...dude
 
SmokeAronAnonAthon

SmokeAronAnonAthon

Active Member
bfq said:
is that your ballast sitting next to the plants?

take that out of your chamber and that should help the temperature situation.
Click to expand...
yes it is always best to have the ballast in a different room with separate airflow i actually drilled a hole in my ceiling and put it up in the addict. but my walls are sheet rock
 
M

mr.homola

Active Member
I think it should be cool. 200 mm total is quite a lot. Do you want to put both of them on sucking out of cupboard? Because if you do and if you have people living around you you will need 2 filters. And those thinks are fucking expensive. So find out if 1 more fan and 2 filters is cheaper than 1 big fan and on big filter. I would do that and use the smaller one to blow in... But don't take me to seriously. That shit cost a fortune and I don't want you to blame me.... I spend a fucking lot a didn't harvest yet so keep a fingers crossed for me. Yeah and an advice I've learned. pH meter is as important like all fans an lights alltogether.
 
M

mr.homola

Active Member
but didn't you said that after taking the balast out the temperature went down? How hot is it there? just thinking, do you need one more fan?
 
lacrossebh

lacrossebh

Well-Known Member
mr.homola said:
but didn't you said that after taking the balast out the temperature went down? How hot is it there? just thinking, do you need one more fan?
Click to expand...
Yea for 10 minuts...afeter whent shit...

I have betther ideia dude...I gonna take this shit here to the store and bring back and buy one bether....but today i leave the doors open around 2 cent...and now is 83degres...
You help me to much dude i never gonna blame for good advises...Just Thanks...:peace:
 
lacrossebh

lacrossebh

Well-Known Member
SmokeAronAnonAthon said:
yes it is always best to have the ballast in a different room with separate airflow i actually drilled a hole in my ceiling and put it up in the addict. but my walls are sheet rock
Click to expand...
I have move to out side my closet....and did help bro...i gonna chance this shit fan tomorow....i put here how is going...

Thanks...
 
M

mr.homola

Active Member
good luck then..
with those doors open. I've found out the same. To alow me to keep the doors close I've drilled those holes to bottom and back of cupboard. But, like 7x 50mm holes droped temp about 2C......

well let me know how you doin...
 
lacrossebh

lacrossebh

Well-Known Member
mr.homola said:
good luck then..
with those doors open. I've found out the same. To alow me to keep the doors close I've drilled those holes to bottom and back of cupboard. But, like 7x 50mm holes droped temp about 2C......

well let me know how you doin...
Click to expand...
How many hole did u make???
Soon one told you for leave the door close???all the time...is that afect...the plants???...
all the holes make droped 2c...???
Did u have i CoolTube???for yours lamps...Ony guy have told me for by that...???But i think is not gonna take the air forn inside...just make cool dow the lamp???

Yea dude...is realy hard....
But we try
Thanks mate...
 
M

mr.homola

Active Member
seven holes

you can keep doors open now but when you start flowering it will have to be in dark for 12 hors so it will need to be closed or dark somehow..

my cool tube sucks from inside out flowing the air around bulb, cooling it down and sucking smell out as well. You could bring the air to bulb from somewhere else as well, say from outside where its cooler and it would definetelly cool the bulb down even more...
 
lacrossebh

lacrossebh

Well-Known Member
I have today chance my Fan...i got one new with 125mm, for 185mCubic...

And i got now around 83F...
Sool i think that is ok yea!!! Because the max is around 85....

I gonna see how is going more later!!!
 
lacrossebh

lacrossebh

Well-Known Member
I Lost...

Now i have look my Closet, and i come back to got 90F...up the lamp, and 93 down the lamp...
I don't know more what i can do...
Buy one Cooltube ...is gonna help me???

Please tell me if is the olly way to make this tell me...i think in the CO2 tank...but is gonna be to expencive...here in Sweden one smal 5lb cost arond...330 bucks more the regulator....

Please...tell me How i can make this...Now i put ice inside....i get crazy....

Thanks
 
M

mr.homola

Active Member
don'tpanic. Before you buy that cool tube, try to bring the end of ducting as close to light bulb as possible. Aluminium ducting is good for that. That should help. also make sure, that there is enough air going in if you sucking it out with that fan. I mean like those holes we were chatting about. You need circulation...
 
lacrossebh

lacrossebh

Well-Known Member
mr.homola said:
don'tpanic. Before you buy that cool tube, try to bring the end of ducting as close to light bulb as possible. Aluminium ducting is good for that. That should help. also make sure, that there is enough air going in if you sucking it out with that fan. I mean like those holes we were chatting about. You need circulation...
Click to expand...
Yea i have note my fan 200mm PC, just put air in when the doors is open, when the are close the push the air out...
Today i think if i got one that fan like i have before...i put to take air fron the window in, is gonna help???
I gonna make soon holes tomorow...because i wait for the myra come first for i can make all this tomorow....
i think the air come in is not to much maybe this is my big problem....
i Gonna try tomorow...that...and i tell you how is going...
But thank Bro...
Is realy hard to make this work without help do u know me...
:peace:
 
lacrossebh

lacrossebh

Well-Known Member
Today i have put up one more 100mm fan to suck frash air in...
Is ok, now in the day i have around 84.6F, i know is litte hot but, is the max i can do...
I have got today the Myra too but i did have time to put up...tomorow i gonna put up and post the pictures...
But thanks for all the help MR.Homola....
Now i not in panic any more...just whant my babes get big, and give soon good and fesh tast.....
 
M

mr.homola

Active Member
cool. Good luck than and keep me informed. I am strugling badly at the moment. Read my post and you'll see. But your temp should be acceptable. i believe that you can even pick up strains which are bit more heat resistant than others. But anyway. All the best.
 
You must log in or register to reply here.
Top