mogie
Well-Known Member
WHAT YOU'LL NEED:
HOW IT WORKS:
Load the first chamber boiling water and the second chamber with ice water.
Use normally, like a standard cylinder bong.
- A half a foot, and a foot long piece of clear plexiglass pipe, about 3 inches in diameter.
A base to put the cylinders on. - An aluminum or brass stem threaded on one end.
- A bowl that matches the threads on the stem
- A drill with a drill bit as big as the stem and a 1/4 inch drillbit (for making the carb hole)
A drillbit the width of the plastic tubing.
A piece of plastic tubing between a 1/4 and a 1/2 inch thick
A plastic cap to cover the first cylinder tightly (needs to form a seal) - Clear silicone caulk.
HOW IT WORKS:
Load the first chamber boiling water and the second chamber with ice water.
Use normally, like a standard cylinder bong.