Frenchy Cannoli
Well-Known Member
Yes you will need a card to come in the 215 in SF
The French Cannoli` Hash Thread
- Thread starter subcool
- Start date
This Hidden Creature
Well-Known Member
@ stondded
If I see it clearly, you don't have a drain plate... I assume it will drain through the holes on the agitator.
I wonder where the pipe resides?
I personaly wouldn't dare making more holes through the agitator.
1. if it's like many, this agitator is a bastard to remove!
It is sealed by under, so if you unscrew the cross screw on the top, the agitator will not move up as it would be expected.
just try and see.
My guess: it will not cause any problem
for top mod questions, ask Mohican, he did some marvel on his new boldtbag machine.
He surely could give you some good hints
If I see it clearly, you don't have a drain plate... I assume it will drain through the holes on the agitator.
I wonder where the pipe resides?
I personaly wouldn't dare making more holes through the agitator.
1. if it's like many, this agitator is a bastard to remove!
It is sealed by under, so if you unscrew the cross screw on the top, the agitator will not move up as it would be expected.
just try and see.
My guess: it will not cause any problem
for top mod questions, ask Mohican, he did some marvel on his new boldtbag machine.
He surely could give you some good hints
Frenchy Cannoli
Well-Known Member
I have never seen one like that, I would personally not have brought it to tell the truth because you may have serious plugging problem when you empty the machine.
qroox
Well-Known Member
Sounds great Frenchy.You're the man..!! just let me know what she says..!! How long does it take to smoke your hash after it's dried and pressed ? I'll be posting pics from my hash making soon..!! Thanks for being here
beuffer420
Well-Known Member
Getting ready to try out the snow run
whodatnation
Well-Known Member
Awesome, snow run ftw!
beuffer420
Well-Known Member
Its working surpisingly well! I'll post pics in a little bit...
I did throw a few ro ice cubes in there too, but the snow did a great job for initial soak before the runs it just forms a layer of cold between the trim.
DCobeen
Well-Known Member
i should get some inside i have like 4 ft outside all over. thanksView attachment 2991466 Getting ready to try out the snow run
beuffer420
Well-Known Member
The snow run.... Tga time wreck, worked pretty great IMO...what ya think?
i did a smaller run just in case the snow was dusty or whatever. First pic was just after breaking up second pic was after cleanup so bout an hour later.
i did a smaller run just in case the snow was dusty or whatever. First pic was just after breaking up second pic was after cleanup so bout an hour later.
Attachments
Frenchy Cannoli
Well-Known Member
Nice work with the snow my friend, much better than ice for the way I work. There is nothing to "grind" the trims when using snow.
beuffer420
Well-Known Member
Thanks frenchy...yea it was def different, I had to pop a few ice cubes in just for noise it sounded so off. May just be me but I noticed the water while it was still holding color of a good run appeared cleaner... you could tell it was gentle with the extract part of the process.
So in your opinion run the rest that way? Or should I wait and see how that turns out first?
DCobeen
Well-Known Member
im using snow to water my babies. just brought in 30 gallons of snow in 5 gallon buckets got lids on them now.
Edit: ill let it melt then ph and tds it first.
beuffer420
Well-Known Member
May as well make use of it while it's there I guess. I def have an abundance of snow this year.
stondded
Well-Known Member
Thts a bummer. Well hopefully an extra wash will ensure that I get everything. We shall see thanks for the input frenchy
Charsicanuk
Active Member
Being in the snow zone myself I'll have to try it . looking good beuffer420!
Charsicanuk
Active Member
Frenchy, If it's so much better taking out the teeth on the BB machine, perhaps we should just remove the whole piece! Have you tried it? Also, other than more rapid flow are there other benifits, ie Quality?
Charsicanuk
Active Member
Frenchy , re hand pressing, is the cure period the same? are there any other things that one should consider with hand pressing for storage? Thanks
Frenchy Cannoli
Well-Known Member
If your snow is clean by all mean, you are lucky I think to have access to purity
Frenchy Cannoli
Well-Known Member
You kind of need to keep the trims inside the machine and with no part at all you are loosing too much every time, on the other hand you can always empty your catch bag back in the machine but too much trims in the catch bag is not the best conditions for sieving as well. So in one world DON'T