TIMBER CYPRESS 8 LED STRIP LIGHT

RainDan

Well-Known Member
Hi RIU,

Wanted to let you know about our newest light, the Cypress 8. This is a mid-power Samsung diode strip style light that pulls 725W at the wall. Some features are as follows:

- Calculated PPE of 2.3 µmol/J
- 44" x 40" x 2.5" - low profile for height compromised areas and even uniform coverage of a 4'x4' area at low canopy heights.
- Operating height 6-12" for flowering
- Color temperatures of 3000K, 3500K and 4000K available. Custom color layout also available (for example, alternating color strips).
- Standard 30-100% on board dimming - available with a controller port to enable connection to most controller units
- All aluminum design - assembled in San Diego, CA from domestically sourced parts whenever possible
- Engineered for simple part replacement/upgradability as well as dual channel drivers to ensure maximum uptime
- 120/240/277 VAC operation
- Waterproof marine grade electrical connections, fused power inlets and jacketed SJOOW style wiring

As with all our lights, each is custom built to spec and lead times average 1-2 weeks. Thanks as always for your support.

Regards,
Dan
 

Attachments

keepittrucckn420

Well-Known Member
Hey
Hi RIU,

Wanted to let you know about our newest light, the Cypress 8. This is a mid-power Samsung diode strip style light that pulls 725W at the wall. Some features are as follows:

- Calculated PPE of 2.3 µmol/J
- 44" x 40" x 2.5" - low profile for height compromised areas and even uniform coverage of a 4'x4' area at low canopy heights.
- Operating height 6-12" for flowering
- Color temperatures of 3000K, 3500K and 4000K available. Custom color layout also available (for example, alternating color strips).
- Standard 30-100% on board dimming - available with a controller port to enable connection to most controller units
- All aluminum design - assembled in San Diego, CA from domestically sourced parts whenever possible
- Engineered for simple part replacement/upgradability as well as dual channel drivers to ensure maximum uptime
- 120/240/277 VAC operation
- Waterproof marine grade electrical connections, fused power inlets and jacketed SJOOW style wiring

As with all our lights, each is custom built to spec and lead times average 1-2 weeks. Thanks as always for your support.

Regards,
Dan
I was looking into getting a new fixture. Are these lights able to be used with a trolmaster or a similar product?
 

RainDan

Well-Known Member
Hey

I was looking into getting a new fixture. Are these lights able to be used with a trolmaster or a similar product?
Hello @keepittrucckn420

Thanks for the post. Yes, all of our lights including the Cypress can be built with an RJ12 connector in lieu of a dimmer knob which will allow you to connect it to a Trolmaster controller unit. There is no additional cost - just mention your needs in the special comments section and we would be happy to accommodate.

Have a good weekend.

Regards
Dan
 
Top