Titan helios 6 electrician question

So I ordered a titan helios six it had nema 6-15 plugins I am going to change them to 120v plugins or have an electrician do it has anyone ever done this.

You can either change the receptacles to 6-15 p...240v @208/480 or change the cord ends with the correct nema 6-15 r...120-240v and probably still change the receptacles to match...why not just hardwire it in a 1900 -j- box...
It is easy though...just like putting a new end on an extension cord...
All electrical work is easy....just shut off that circuit first before you work on it.

I was thinking that I would have to do more then just rewire the nema plug since it's a 240 and I want to down grade to a 120. On each of them.

I don't think there is a neutral in 240 so I'm not sure how I am going to make all this work but when I get the box I will open it up and take some pictures of it. Just was trying to get advice.

I c easy enough u r the man!

Yes now you have to rewire the ballast tap for the voltage change...the voltage should be printed on the wires if it is a multitap...variable voltage...ballast.

Ok so I just bought the diffrent nema cords that work with my ballast. And plug right into the box re wiring sounds complicated lol or will I still need to rewire them?. Now for a power cord I have a few feet of some 10/3 stw 30 amp cable.. Inside my controller it's states 6awg and 50 amps... So I am guessing it would be a problem to use this cord.