Vert(600+400) 5 plant, from Ukraine with love

Status
Not open for further replies.

420x024

Member
Bro, Thank you from Soul!
You do not say so ....))) shorter


We have a saying. "Голь на выдумку хитра".....How do you explain?))) .... At the rich in gold, the brains turn into cotton wool))) Poor always in search of an exit ... so he is smarter and smarter))) if you understand me)))


The depths of the soul, like a person in pain, are hard to find !! I love black music and old school))))



Once again, Thank you, bro, for your support !!!
I ain't even from a hard place. But I heavily fuck with this music you repost always. Good shit bratan
 

Sedan

Well-Known Member
I ain't even from a hard place. But I heavily fuck with this music you repost always. Good shit bratan



The song of those who lived for the soul,
Those who have not seen knives behind their backs ..
Sharing fear who remained in the shadows,
God forgive you mother save!

Lovely home dear cute house,
On a damp earth I would go as a bee-hanger,
Under the open sky to break the bridges,
How can we spare and forgive without them !!!

I want to live we want to live,
With those who did not get the knives from their pockets!
I want to live we want to live,
Do not leave those who have not lived ..

It's cold when the rain in the heart,
Where are you waiting for my sun!
Bursting off the shower, you go back to us,
All this in a dream, but I do not believe in dreams ..

Why should not everyone live?
The fact that you can not know in your head,
Hug us even if you are not,
We are with you everywhere among these planets!
I want to live we want to live,
With those who did not get the knives from their pockets!
I want to live we want to live,
Do not leave those who have not lived ..


And everyone should know about how to live and loved ones,
During the hassles of hammering at all and being close to them,
All life is one story of fate, each covered,
And we will remember all who were dying of death ...
Embrace me, even if you are not with us, how can it be difficult without you to live ..
Embrace me, even if you are not with us, how can it be difficult without you to live
 

Sedan

Well-Known Member
Now, as promised, the review in detail:



As we see, in new conditions, and with more careful care, plants are gaining strength at a rapid pace. There is nothing more to say, see for yourself:

Bermuda fem SedanSeeds

1.JPG 2.JPG

Lara Fem SedanSeeds

3.JPG 4.JPG

Further more...

5.JPG
6.JPG

until all..

DSCF3623.JPG
DSCF3624.JPG

To be continued......

 

Sedan

Well-Known Member
Now my wife will demonstrate a masterclass on plucking leaves, and tying the branches to the net, with the help of clerical rubber bands and linen clothespins. Does, solely by hand, no scissors

Not without the help of Elsa, of course ....


9.JPG

Bamdat Fem

before

1.JPG

after

2.JPG


Crazy Kush Fem

before

3.JPG

after

4.JPG

plucked leaves

5.JPG

While all

6.JPG

7.JPG

8.JPG



To be continued....
 

Sedan

Well-Known Member
"sins of my youth do not remember my Lord".


a song about the life of young people in the 90's in troubled times of chaos and economic instability, I experienced this period too, prison and family stopped me, otherwise it would be unknown to me ...

 

Sedan

Well-Known Member
Today I finally got a sensor, and I can definitely determine the exact temperature and humidity in the installation near the lower lamp and the top one.

After some manipulation, I managed to equalize the temperature and humidity to such ranges

downcast

Снимок.JPG
up

Снимок.JPG

Now I will put a little more powerful fan of the bottom blowing, then, the temperature will almost equal, according to my calculations. I have a fan more powerful. In the near future I will connect it, and everything will become clear)))

Снимок.JPG

And when the installation is airtight, I'm sure there will not be any problems with comparing the temperatures at the top and bottom, !!

To be continued............


 
Last edited:

ttystikk

Well-Known Member
I used a big fan, 76cm diameter. It pushed a good volume of air up from the bottom and out the top. It also lifted CO2 from the floor in the process.
 

Sedan

Well-Known Member
I used a big fan, 76cm diameter. It pushed a good volume of air up from the bottom and out the top. It also lifted CO2 from the floor in the process.
Yes, Bro, I need a more powerful fan. Now I have a household 50 cm diameter, 50 watts of power. If I put on 70 watts, the question will be settled. Only here is one problem. Humidity will fall ... All the same, in the future, I want to solve this problem due to its germicity. There is a potential. I closed the installation more tightly with the screen, now I have the figures: at the top of 28.4 with 40%. below 27.0 С. 46%.

Because my life credo: do not waste extra power if you can manage without them. Then there will be still strength for something))))

Everything, now I have time to do installation. A few years, because of lack of money, I stamped on the spot, but still, I did.)))

This is not advertising, you still do not understand Russian)))

http://sedanseeds.com/
 

Sedan

Well-Known Member
Now some information from my garden.

Literally the day before yesterday, defoliation was once again done. Please note, weeks have not passed yet. And the plants are not yet transplanted into a large soil, all the main development is yet to come.

Photo of the trimming of leaves

before

1.JPG

2.JPG

after

3.JPG

Plants after the equalization of humidity and temperature, I, as expected, completely satisfied.

A short review:

(two days after pruning)


8.JPG

9.JPG

10.JPG
11.JPG
12.JPG

Auto Kush

5.JPG
6.JPG

Since the main and priority task is completed, the website is ready, now my hands are untied, and I can tightly engage in the modernization of the "SDU Pegas". Here, as expected ,. and the fun begins that I want to tell you.


To be continued.......................
 
Last edited:

Sedan

Well-Known Member
nice little up in here. great stuff!
Thank you, Bro!

*************************************
Yesterday I bought a metal profile and hardware, I will collect a frame for installation on the weekend. Yesterday, I received a parcel. Because on the top lamp I had a Chinese throttle , for greater efficiency, I decided to spend a little bit and bought this kind of thing.

Снимок.JPG

Снимок.JPG


Now I'll take care of it, I'll get stuffing, and I'll throw out the lamp myself, I already have three of them lying around. This lamp, together with the starter, the capacitor and the throttle, cost me .... 15 $
 

Sedan

Well-Known Member
Let it be for now. But I am very much delayed by the reconstruction of the installation. This is not an easy and quick task .. and the plants grow at a tremendous pace, and I have yet another transfer to a larger volume. I'll cut the branches mercilessly. I have not yet decided on the technique. There will be, something like Maine linings ...

DSCF3895[1].JPG

this is two plants)))
 

Sedan

Well-Known Member
A small surveyor on the sativa varieties of my garden.

Lara Fem and Bermuda Fem.

As far as we can remember, very recently these plants were in a deplorable state, but after I leveled the humidity and temperature, it can already be said with certainty that the plants are completely healthy, and went into growth. That for me not so, since. will have to cut a lot of branches, because as far as I know, Bermuda blossoms very long and it's already in bloom, you have to continue to weave ...


2.JPG 3.JPG 4.JPG 5.JPG 6.JPG 7.JPG 8.JPG 9.JPG 10.JPG

Auto today for the first time fed for color:

PF 1g / l, 1000 PPM was obtained, because, at the pre-pouring with water, 700 PPM was shown at the output, this is very small, for such a period, and I fed 0.8 g / l PF before that.

1.JPG
 

Sedan

Well-Known Member
Do you remember that girl from Surgut (the far east of Russia)? Her work is now:









I think the technique reminds you something)) .. or not?))
 

Sedan

Well-Known Member
I don't remember this girl.

What would it remind me of?
previously I showed her works. You just do not remember. This box is a 60x80 frame with a height of 1.6 m. Light 2Х400 watts, sodium lamps, two plants .... a grid ..

 
Status
Not open for further replies.
Top