wax

Trousers

Trousers

Well-Known Member
I have a concentrate bowl like this:



I used to use a glass rod and a torch, it worked great. Now I use a Hakko soldering iron (the BEST way to smoke weed). I make my own full melt bubble hash and the hits are so smooth you do not even know you got one until you blow it out. No coughing what so ever.

You can get a Hakko soldering iron for about $35. I bought the fancy station so I have a place to rest it when it is hot.

I have been out of hash for a few weeks now, time to drag out the bubble machine.
 
chewberto

chewberto

Well-Known Member
Chimone said:
no like a crackhead type of thing. It functions the same way a brillo pad works for a someone smoking crack. Its very porous with a shitload of surface area, THis one was used when the glass was blown so it was a perfect fit. Just put the wax on top of the stone an hit it directly with the torch. wash rinse repeat
Click to expand...
You just took me back to Santa Ana with the Brillo!
 
chewberto

chewberto

Well-Known Member
So a couple questions from ol chewberto? What diameter and length glass tube is most effective for blasting wax?

would a Longer 15" with 1 1/8" inside diameter be best Or a stubby 2" inside diameter 12" long glass tube?

My thoughts are that I have an 8" long 3/4" inside diameter now and it is too small for what I want to do! I want to blast Maybe 30-40 grams of small buds at a time!

Would a stubby one be less effective due to the width of the diameter vs the spray flow? I would think it would have to saturate rather than blast through like a narrow tube! I know there will be plenty o' pressure, but I was wondering if anyone had an opinion on this!

By the way I am practicing for all the free dabs at the cup booths!
image.jpg
I used to bang black and smoke crack now Im on that oil and wax! True story! These aren't even triggers! image.jpg
 
N

NEEDMMASAP

Well-Known Member
Trousers said:
I have a concentrate bowl like this:



I used to use a glass rod and a torch, it worked great. Now I use a Hakko soldering iron (the BEST way to smoke weed). I make my own full melt bubble hash and the hits are so smooth you do not even know you got one until you blow it out. No coughing what so ever.

You can get a Hakko soldering iron for about $35. I bought the fancy station so I have a place to rest it when it is hot.

I have been out of hash for a few weeks now, time to drag out the bubble machine.
Click to expand...
I like your idea of a solder iron , is it a smoother smoke because of the temperature of the iron , seen this one on Amazon it $83 , can adjust to temperature you want , didn’t see any in the price range you mentioned , what is the model number of yours ?

http://www.amazon.com/Hakko-FX888-FX-888-Soldering-Station/dp/B004M3U0VU

  • Adjustable temperature control with lock/set screw. Temperature range 392°-896°F (200°- 480°C) Maintains idle temperature within 1.8°F (1°C)
  • Ceramic heating element and sensor ensures rapid heat-up temperature and fast thermal recovery.
  • Celsius and Fahrenheit temperature display. Temperature adjusted by simply turning the dial.
  • Slender iron handles are padded and have an ergonomic design for comfort and ease of use.
  • Wide selection of tips available for soldering SMD and through-hole applications.
 
chewberto

chewberto

Well-Known Member
I am blasting tomorrow! Strain specific blue cheese and lavender bho! U bought a new tube and it came with a 200 micron mesh nylonish looking yellow screen! Is 200 good for bho? Thanks
 
chef c

chef c

Well-Known Member
I use a coffee filter @ c. 20 microns. It works great! Careful when you load your tube not to smash and break up the sugar leaf. And the more heating and cooling cycles the better! Have fun, show pics!
 
chef c

chef c

Well-Known Member
chewberto said:
So a couple questions from ol chewberto? What diameter and length glass tube is most effective for blasting wax?

would a Longer 15" with 1 1/8" inside diameter be best Or a stubby 2" inside diameter 12" long glass tube?

My thoughts are that I have an 8" long 3/4" inside diameter now and it is too small for what I want to do! I want to blast Maybe 30-40 grams of small buds at a time!

Would a stubby one be less effective due to the width of the diameter vs the spray flow? I would think it would have to saturate rather than blast through like a narrow tube! I know there will be plenty o' pressure, but I was wondering if anyone had an opinion on this!

By the way I am practicing for all the free dabs at the cup booths!
View attachment 2615673
I used to bang black and smoke crack now Im on that oil and wax! True story! These aren't even triggers! View attachment 2615674
Click to expand...
sorry I didn't get back to you on this... What size tube did you go with?
 
chewberto

chewberto

Well-Known Member
I am definitely open to a full melt solventless! I don't argue with success and purity! Considering my past smoking bho is like drinking holy water! But I do seek solventless full melt!
 
You must log in or register to reply here.
Top