What did you Get Done in the Grow Room Today?

legallyflying

Well-Known Member
Chopped last 5 plants, trimmed and hung buds, removed scrog screen, removed chopped plants from hydroton, flooded all 16 buckets with bleach water, rinsed buckets, took out hydroton filled buckets, rinsed all connection hoses, removed insulation from roof of grow room, installed new panda film on ceiling, scrapped old paint off the floor, repainted the entire grow room, re-installed wall fans.

Yes, my back is fucking killing me.
 

legallyflying

Well-Known Member
Today I walked in to the flower room drinking an ice cold beer, looked at the new set of girls. Pushed a couple
Shoots back under the SCROG screen, looked at the co2 ppm and temperature, smiled, and walked the fuck out.
 
today i checked them up and down examining their amazing growth and aroma. i mixed 1 table spoon of molasses in water and watered them. then rotated the pots like usual clipped a leaf to check the tric formation. looks great, still clear on all three...then i lifted the net pot out and checked the roots. next i lowered the light a little bit because i added more cooling.

when im all done with all the work or fun in the room i sit there and gawk at my prizes. and try to figure out how much ill get.
 

kevin

Well-Known Member
got some trees cut down and others trimmed up so the sun can reach my girls. that was a bunch of work but we made it to look like a maintaned nature trail. been working on it for a couple of weeks now. flowers, butterflies, and cannabis plants. what a fucking hippy!!!
 

dadio161

Well-Known Member
Well , my newest girls are new clones that I planted only three days ago. So today I just smoked a fatty with them and wiped down the light hood . This left me too much time to think about how much I had to pay for these clones. They cost me $20 each . Thats tooo much but I was desperate to get growing again. That was C-Note for 5 ladies. So I went to my local hydro store as I was stoned and have the day off. While I was there today , I piced up a set of Rapid Rooter plugs , some Hormex , and a new T-5 light set up. I got a 2 foot , 4 tube set by hydrofarm. I am just gonna have to jump into this clone thing and use this light to Veg. If I stay with Flo and Blueberry , I can have a harvest every 8 weeks.
I just started my 5th grow using an Ebb and Flo system. You can check out my signature to see how I built my system and follow my third grow. My last harvest was sucessful but I started a new job and didn't journal her.
 

0011StealTH

Active Member



I took 4clones 2days ago and I just recently put a light on them this is how they looked before I left to work.

I also ran into problems my lights felt out my pc so I had to re secure them and took a lot out of my day peace.
 

Metasynth

Well-Known Member
I transferred 12 rooted clones into party cups, mixed soil and perlite, transferred 3 seedlings from party cups to 2.5 gallon pots, put 2 plants into flower, re-arranged lighting, watered, stared lovingly at my plants and whispered sweet nothings to them.
 

ClosetCoco

Member
woke up in the middle of the night so i smoked a bowl and decided to finish up my grow room and check on the babies
finished installing exit of the exhaust system. (into a super convenient attic opening)

the six inch fan makes my t5's so cool. also gives the seedlings a nice breeze.

checked if they needed water

misted the rapid rooter tray
 

dajosh42069

Well-Known Member
Today in my grow room, I made sure my clones were healthy and that the humidity is high. dropped about 15% in the last hour or so, it fluctuates which is unfortunate, as I know that types of from in rH can kill a clone...

Today in my grow room, I battles the temps to keep it a sturdy 79.5 degrees. I check my plants to make sure they don't grow into their CFL's. I mist my clones and I make sure that my Master Kush is green and beautiful.
And today in my grow room, I sit and stare....watchin the fuckin grass grow...^_^
 

endogarden

New Member
Today I finished the veg closet, hanging the 400watt in a Daystar AC6, installing the exhaust and connecting it to the flower tent exhaust ducting (...tapin that up above my head was a bitch to do by myself). Wish me luck that there's no light leak! We'll find out at dark time.

I took the humid-i-dome off the Grapefruit clones and will transplant them to Botanicare coco coir in 5.5 inch square pots tomorrow. Figured they've been in the tray for 33 days, they are pretty much vegging and they should get used to being in 50% rh, and not the 80-90% rh they've been in.

Does anyone know if I need to rinse drywall dust out of my recently washed tray, or can I just vacuum it? I couldn't find out whether or not it would affect the plants.
 

ChroniCDooM

Active Member
Day 11 of flower. I rotated the girls. I can say girls cause they are now showing their pistils. Spotted them after giving them a good daily once over. Also checked on the co2 regulator and adjusted accordingly. Raised the light to max height also and removed an old carbon filter. Time to get bbbaked and eat some cereal.
 

endogarden

New Member
Today I finished the veg closet, hanging the 400watt in a Daystar AC6, installing the exhaust and connecting it to the flower tent exhaust ducting (...tapin that up above my head was a bitch to do by myself). Wish me luck that there's no light leak! We'll find out at dark time.

I took the humid-i-dome off the Grapefruit clones and will transplant them to Botanicare coco coir in 5.5 inch square pots tomorrow. Figured they've been in the tray for 33 days, they are pretty much vegging and they should get used to being in 50% rh, and not the 80-90% rh they've been in.

Does anyone know if I need to rinse drywall dust out of my recently washed tray, or can I just vacuum it? I couldn't find out whether or not it would affect the plants.

So today was part 2, I transplanted the Grapefruit clones to the new veg closet, it's stable; 75F 46%RH in there, and I have 7" Clip fan osciallating on them.

Soaked em in Thrive Alive B-1 Green, MagiCal, & RO water @ 5.7 pH for 45 minutes and sprayed them with RO water.

I'm going to get a 7 or 10 gallon pot and put the best of the remaining 16 clones in one huge cluster into straight coco. Gonna try to get them as tall as I can for fun in the bathroom where there's more clearance. They'll be under one 150watt CFL for now.

Any advice on how many and how to arrange them in the huge pot? :???:
 

legallyflying

Well-Known Member
Today I left my grow room to work out of town for two weeks. ahhhh, the freedom of automation. Try that with a soil grow. :)
 

puffntuff

Well-Known Member
I started hitting my girls with nutes and molasses. First time I'm using molasses. Plants got around 18 days or so left. Bought myself a microscope but this bastard is 60x zoom to 100x zoom and it takes a bit to focus on the trichs. They are clear with 0 amber. All my hairs are white but 1 or 2 hairs per bud are starting to turn a bright orange so the countdown begins. Veg room watered with my brita filter and transplated into 1 gal pots to get ready for the great outdoors.
 

0011StealTH

Active Member
Day 11 of flower. I rotated the girls. I can say girls cause they are now showing their pistils. Spotted them after giving them a good daily once over. Also checked on the co2 regulator and adjusted accordingly. Raised the light to max height also and removed an old carbon filter. Time to get bbbaked and eat some cereal.
My babys is showing off her pistils as well to bad she is gona stay a virgin lol

 
Top