What is the best way to set up these lights and ebb/flow trays ???

VictorVIcious said:

It wasn't because of trusting them, they are just too long. I replaced them with a pulley that had an 'eye' on the end, less than $2.00 a piece at Big Box Stores. Earl has a way of doing this that is simple and cheap, I think it was from his camping experience. He posted that somewhere.

Click to expand...

I will look for Earl's contraption... Thanks!

VictorVIcious said:

Yes , I did see that you have a project there, 3 lights four tables, one cooling fan for the lights, hmmm...couple of days to mess with that.

Click to expand...

Yeah... I just want to figure it all out the best way...

The 424cfm for the 3 lights works pretty good.... even being 75F WARMER than it was last week (temps jumped from 30 below to 45 above in 1 day), I can still use the exhaust of the cooltubes as the intake for the vegg tent... about 65 to 70 degree air after all lights...

VictorVIcious said:

A single 600 would cover the first two stages, you would get some light from the next fixture. I would be inclined to try the all on the long wall, 2-600's over the three 2' by 4' tables and the remaining one over the 3' by3'.

Click to expand...

All Along the wall works, but I want the "island" so I can walk around the tables 360*...

VictorVIcious said:

There are a lot of things to consider, attic above?

Click to expand...

Attic is 2ft tall and PACKED with insulation... impractical to say the least... I ain't going there to be specific... lol...

VictorVIcious said:

where are the plugs, where can you put the ballasts, etc.

Click to expand...

The plugs are being brought to where they need to be from a 240v outlet elsewhere...

Light will go on this power and the rest will go on the 20 breaker for the room...

Ballasts will go on a shelf against the wall, along with some other stuff...

VictorVIcious said:

Take a look at mine, it always has the same configuration??? yeah right. VV

Click to expand...

I will... VV thanks for coming by and taking the time to help out...

Best wishes...