Cannarado genetics

ChronicWonders.

Well-Known Member
Yo thats titts right there bud you did your thing on training & veging her, is that 2 plants or how many is that?
4 plants…topped a few times, put down one net and let them grow horizontally a week or so to fill out and then flipped them. With the 4 different plants and not weaving/pulling down branches under the net, the canopy isn’t perfect. But it’s close enough for the HLG600 to manage. Didn’t run any supplemental or side bars this time as I was just trying to throw this grow together after waiting too long to flower out these testers.
 

Shastafarian

Well-Known Member
4 plants…topped a few times, put down one net and let them grow horizontally a week or so to fill out and then flipped them. With the 4 different plants and not weaving/pulling down branches under the net, the canopy isn’t perfect. But it’s close enough for the HLG600 to manage. Didn’t run any supplemental or side bars this time as I was just trying to throw this grow together after waiting too long to flower out these testers.
So you pretty happy with the HLG 600 is it the Rspec? I was wondering myself since I love the quality of flower I get and see from HPS vs LED typically the only thing that outperforms hps imo is the density & kw/hr from not having to cool as much but seems the HLG Rspec is the closest I've seen to HPS quality headstash flower regardlessof the extra cost & heat Ive always been used to managing even in the South. Ive seen some fire LED flower don't get me wrong but I can always see the difference of development in the calyxes and a little bit in the trichomes but with LED they seem to grow almost too dense to allow for proper terpene production inside the flower so when u pop it open u get gooey insides too which when it grows super dense & faster it doesn't have time to develope those trichomes to the level hps does imho. Now this being said the trade off does seem worth to go to LED finally & Im just debating still in my head if its a typical multi rail light 650w then yes the coverage is 5x5 and beats a 1k single bulb but on a HLG 600w rspec it seems to small of a unit to supply much wider coverage then a single bulb 1k/hps. Im more fond of 2- 400w hps over 1k single bulb id get higher quality & larger yields.
 

Officialoracle420

Well-Known Member
So you pretty happy with the HLG 600 is it the Rspec? I was wondering myself since I love the quality of flower I get and see from HPS vs LED typically the only thing that outperforms hps imo is the density & kw/hr from not having to cool as much but seems the HLG Rspec is the closest I've seen to HPS quality headstash flower regardlessof the extra cost & heat Ive always been used to managing even in the South. Ive seen some fire LED flower don't get me wrong but I can always see the difference of development in the calyxes and a little bit in the trichomes but with LED they seem to grow almost too dense to allow for proper terpene production inside the flower so when u pop it open u get gooey insides too which when it grows super dense & faster it doesn't have time to develope those trichomes to the level hps does imho. Now this being said the trade off does seem worth to go to LED finally & Im just debating still in my head if its a typical multi rail light 650w then yes the coverage is 5x5 and beats a 1k single bulb but on a HLG 600w rspec it seems to small of a unit to supply much wider coverage then a single bulb 1k/hps. Im more fond of 2- 400w hps over 1k single bulb id get higher quality & larger yields.
Hlg 600 r is an amazing light and definitely will be great in a 5x5 space
 

ChronicWonders.

Well-Known Member
So you pretty happy with the HLG 600 is it the Rspec? I was wondering myself since I love the quality of flower I get and see from HPS vs LED typically the only thing that outperforms hps imo is the density & kw/hr from not having to cool as much but seems the HLG Rspec is the closest I've seen to HPS quality headstash flower regardlessof the extra cost & heat Ive always been used to managing even in the South. Ive seen some fire LED flower don't get me wrong but I can always see the difference of development in the calyxes and a little bit in the trichomes but with LED they seem to grow almost too dense to allow for proper terpene production inside the flower so when u pop it open u get gooey insides too which when it grows super dense & faster it doesn't have time to develope those trichomes to the level hps does imho. Now this being said the trade off does seem worth to go to LED finally & Im just debating still in my head if its a typical multi rail light 650w then yes the coverage is 5x5 and beats a 1k single bulb but on a HLG 600w rspec it seems to small of a unit to supply much wider coverage then a single bulb 1k/hps. Im more fond of 2- 400w hps over 1k single bulb id get higher quality & larger yields.
I like my HLG 600 but it’s going on 3 years now and isn’t the RSpec model. I have 2 supplemental lighting bars for added blue/red I usually run to fill out the 4x4. When I buy my next lights it will be bars for better dispersion or smaller units to space them apart. It wouldn’t be enough light in a 5x5 without a lighting rail.
 

Nate Dogg

Well-Known Member
Two of the Bazookaz, and last one is the Nilla Wafer. This is before i accidentally dropped the carbon filter while working in the tent, and accidentally bumped it. Didn’t snap any other branches, but bent one of the main tops to one of the Bazookaz pretty bad. Hopefully it makes it, but it got bent pretty hard. So I’m going to keep my eye on it, and also put a little aloe where it got burnt. Week 2 into the flip.
 

Attachments

Last edited:

Nate Dogg

Well-Known Member
Hey buds- Did you pop those Dying breed acai Z? If so what was your experience? Flowering time/terp profile etc. any knowledge wld be helpful. I have that and the "Russian Kush" from Dying breed but had to pay $120 Acia Z & $100 Russian Kush on GLO RN. I'm very interested in what the ACAI Z has to offer due to the landrace lineage.
Not sure if anyone answered your question here, but yight get a some more helpful advice in on of the dying breeds threads, or even one of the GLO threads. Not being rude, because i’m definitely guilty of talking about other breeders gear in this thread/and others. Hope i could help
 

Nate Dogg

Well-Known Member
just ordered a pack of Nilla Wafer that popped up somewhere, and definitely wasn’t cheap. Want a backup just in case none of the clones root(not going to lie been dropping the ball heavy when it comes to cloning since i really don’t have the time, and attention they need due to work). Thinking about snagging either Peanut Sundae, Valley Sundae, or TriFi Sundae, with Sticky Sundae or Gelato Sundae if they’re still in stock. Anyone run Gelato Sundae, Valley Sundae, or TriFi Sundae? Seen some amazing results from Sticky Sundae and Peanut Sundae, but haven’t seen much if any from the other 3 SD crosses.
 

TerrapinBlazin

Well-Known Member
just ordered a pack of Nilla Wafer that popped up somewhere, and definitely wasn’t cheap. Want a backup just in case none of the clones root(not going to lie been dropping the ball heavy when it comes to cloning since i really don’t have the time, and attention they need due to work). Thinking about snagging either Peanut Sundae, Valley Sundae, or TriFi Sundae, with Sticky Sundae or Gelato Sundae if they’re still in stock. Anyone run Gelato Sundae, Valley Sundae, or TriFi Sundae? Seen some amazing results from Sticky Sundae and Peanut Sundae, but haven’t seen much if any from the other 3 SD crosses.
what do you use for cloning? I use a floraflex incubator tray and root riots. I just went out of town and had to leave it for 48 hours. I put some extra water in the lower tray and when I got back all the beans I had in there had sprouted (13 white lickz and 5 money gun x GP) and all my clones were rooted and healthy. It’s honestly a pretty low maintenance setup and I haven’t had a single clone fail since I ditched the aero cloner (sorry aero cloner fans).

Anyway here’s a couple shots from my 2x2 tent. My loud pink runtz leaning pink grapes and this numnum that I’m definitely gonna have to reveg.
41B426A9-5F7E-4EBC-B671-56187CA291BE.jpeg48F8B468-5B6A-4D59-AED3-BCBAF6731234.jpeg
 

madvillian420

Well-Known Member
i know some of yall use straw as a top cover for your soil, anyone topdress on top of that? im thinking my girls could use some love but the thought of removing straw from 15 pots makes me wanna cry

Also i started a journal, its mostly Cannarado gear, im going to post more pics/updates there than here, dont wanna spam the thread. feel free to swing by
 
Last edited:

TerrapinBlazin

Well-Known Member
I can’t wait for mine to be ready. It’s looking like some serious heaters are in my pack. Speaking of serious heaters, the second bubblegum bacio pheno is looking like the winner out of the tester pack. The terps are absolutely incredible. Like cherry bubble tape. And since the name bubble tape isn’t taken yet that’s what I’m calling this cut.8098F89C-0EF5-4D62-AD91-65CD767C85F6.jpeg
 

Snowback

Well-Known Member
So you pretty happy with the HLG 600 is it the Rspec? I was wondering myself since I love the quality of flower I get and see from HPS vs LED typically the only thing that outperforms hps imo is the density & kw/hr from not having to cool as much but seems the HLG Rspec is the closest I've seen to HPS quality headstash flower regardlessof the extra cost & heat Ive always been used to managing even in the South. Ive seen some fire LED flower don't get me wrong but I can always see the difference of development in the calyxes and a little bit in the trichomes but with LED they seem to grow almost too dense to allow for proper terpene production inside the flower so when u pop it open u get gooey insides too which when it grows super dense & faster it doesn't have time to develope those trichomes to the level hps does imho. Now this being said the trade off does seem worth to go to LED finally & Im just debating still in my head if its a typical multi rail light 650w then yes the coverage is 5x5 and beats a 1k single bulb but on a HLG 600w rspec it seems to small of a unit to supply much wider coverage then a single bulb 1k/hps. Im more fond of 2- 400w hps over 1k single bulb id get higher quality & larger yields.
There is a guy that I sometimes check out on IG who uses a bunch of cheap Chinese budget Amazon LED boards and he fairly consistently grows some of the nicest LED weed that I have seen. It's quite a sight.
 
Top