Day # 9
ppm level: Added 5 Gallons to res 765ppm
res temp: 22.0 C
canopy temp: 25.3 C
light hanging height from canopy: 15"
Current watering schedule: 2 X 10min flood, lights on and 1/2 through light period
Day # 10
ppm level: 748
res temp: 21.9 C
canopy temp: 25.0 C
light hanging height...
Day # 6
ppm level: 973
res temp: 22.0 C
canopy temp: 25.4 C
light hanging height from canopy: 15"
Current watering schedule: 2 X 10min flood, lights on and 1/2 through light period
Day # 7
ppm level: 936
res temp: 22.8 C
canopy temp: 26.1 C
light hanging height from canopy: 16"
Current...
Day # 3
ppm level: 627
res temp: 22.9 C
canopy temp: 26.9 C
light hanging height from canopy: 15"
Current watering schedule: 1 X 10min flood at lights on
Day # 4
ppm level: 611
res temp: 23.7 C
canopy temp: 26.4 C
light hanging height from canopy: 15"
Current watering schedule: 2 X 10min...
Day # 2
ppm level: 797 then added 5gal ro water finish ppm 662
res temp: 23.1 C
canopy temp: 26.2 C
light hanging height from canopy: 16"
Current watering schedule: 1 X 10min flood at lights on
Leafs have turned toward the light and everything is setting in beautifully. Not much else to report.
Day # 1
ppm level: 710
res temp: 23 C
canopy temp: 30 C
light hanging height from canopy: 16"
Current watering schedule: 1 X 10min flood at lights on
Picture
Well it looks like that picture is not going to work.
Welcome to my the grow journal. This was created to test the performance of the True Northern Lighting 432 chip fixture. The specs are as follows.
Type: Flower cycle 12/12
Days: 1-60
Plant count: 13
Strains: 1 Amherst Sour diesel...
Just from the 2nd picture of the fan leafs they have abit of droop to them aswell there are so many things that can cause issues and they all look similar. this could be a temp problem ph problem or over watering. also some strains just do funny things at end of flower the plant is putting all...
looks like nitrogen poising to me. i would flush and restart at 1/2 strength if your using synth nutes or just do ph'ed water with a little calmag for a few feedings if organic.
hairs all looking perfect at 7 weeks in i have a purple train-wreck pheno by: HSO seeds that looks like this it normally takes 9-10 weeks just keep a eye on trics and swelling.
Looking really good man keep up the good work!
So here is my issue i am planning on ordering
3x 46V test at 1.12A or 1200mA
https://www.digikey.ca/product-detail/en/samsung-semiconductor-inc/SI-B8T521560WW/1510-2223-ND/6624007
Powered by 1x HLG240H-C1400B 179V @ 1.4A constant current driver...
Personally i use 29% h202 (hydrogen peroxide) , at a rate of 1.5ml / L you can push it up to 3ml / L safely. Its worth nothing that if the roots are getting to much air exposure at any one time this can also cause the roots to turn off white colors as they oxidize.
Edit: Just a after...
Hey Bob,
I believe your thinking is correct. The clones you are taking are older then the new growth on the plant that came from seed, had they have been left on the seed plant they may be slightly farther along and showing pre-flowers due to the added stress of growing new roots.
Personally...
I had a PM problem in my clone area. I wiped everything down with a organic cleaner in my case green wipes. Also remove any dead or dieing material from the grow space and let your RH drop for a few days. this should help contain the problem for the remainder of the grow.