Recent content by smoke and coke

I am not a roofer but looks to me like water getting in around the chimney. You should go up to the attic and check for water damage. Look at the plywood and see if it still looks good. I would have a couple of different roofing contractors give you an estimate. If left unchecked, it will be...

Welcome thought it was Gomer Pyle and his hoooody hooo call

How are you getting your DC power source? The ink bird has 2 outputs. 1 has a high and low set point to turn on a dehumidifier and the 2nd output turns on and off the humidifier. Both are a 120 volt plug in outputs. You would have to plug in the 120 volt power source that will turn on the DC...

Purple lobster and indigo sapphire look like something I would try. Thanks for the chance at the giveaway.

I use sunshine mix4 for a medium, also have 5 bales of bx Promix hp to try out next run. When I started using the fox farm line up, I struggled to keep the leaves green until harvest. I found the addition of cal mag very helpful. Also you should look up the fox farm feeding chart. start out...

Thanks phlizon for another great giveaway. I have a perfect place for the fd600. I would be very happy to test this light in a 4x4 area. Check this out @buckaclark and @UnholyFire

Sway to go. Keep us updated.

What light are You using and how close is it?

As said above you should be fine. I would think that a quality timer would solve this. If running led fixtures I would also recommend a surge suppressor to protect your light.

Nice grow set up. Looks like your dialed in. I’m going to stick around and possible learn a thing or two. I have been thinking about making a screen, and your has given me an idea or two. Ha I have learned something already.

Spooky OG these 2 were small when put into flowering. I have a clone from each in veg to run again, and will get a clone for the 3rd run. This first run will be cured and tested and I will know if either is worth a 3rd run or more. The first and second run will be with hps and the 3rd run will...

I ran into the same problem when I switched to led last summer. I usually run closer to 78 degrees with the hps and when I ran the same temp with led my plants suffered. I had to raise my temp up to between 82 and 84 degrees, and also lowered my wattage down some until the plants recovered. Then...

What kind of lights are you using?

lol no I was just posting to the op that the color change can happen with the temps he is running. Wasn’t jumping in to talk about my grow. my plants have been harvested

I am in an unheated space and it’s winter time so a small radiator and the hps are the heat.