Recent content by Turbonyg

Hey All, Have a 4x4 grow area that I am thinking of adding more strips to. I have almost no experience with the led spec charts and how to understand/correlate them to what I should use. Light set up is (12) Bridgelux BXEB-L1120Z-35E4000-C-B3 each on an actual heatsink and a Meanwell...

Hey All, I am starting to look into portable wax pens and came across the Honeystick Plasma GQ unit. It looks like exactly what I was looking for. The concentrate sits on glass that is heated up by the coil, so there is not any wax contacting the coil. Anyone using this device or have seen...

Thanks for the info. That was my basic plan also. Wash it all at once which is the quick part. Then just fill the Source and let it run while I can be doing other things. Did you decide to stick with pressing, or are you planning to switch. Is there a reason to store the ethonal/thc mix in...

Hey All, I'm looking for the more efficient process. At this point I usually have 15-20oz to process at a time depending on amount of flower kept. I'm currently using 4x7 press plates and pressing about 5g per bag doing a double press. I think it's taking about 30m to pack/press/scrape an...

I would say it depends on if you are trying to maximize each plant or not. I have a 3x3 tent and a 7x7 room with 4x4 grow space. 1 Photo plant (vegged 2-3 months) fills the 3x3 tent. The 4x4 space, 5 LST Autos fit without to much touching. 1 each corner and 1 in the middle. I prefer to not...

Hey All, If reasonably affordable and available, I would like a power strip where each outlet can be individually programmed via laptop. I usually have 2 different light cycles goings and am thinking of adding a UV light. I have individual outlet timers on the main lights now, but would like...

I'm on my 3rd grow which was turning out to be the most productive so far so hoping I don't loose it. Indoor grow in FFOF soil, plants started from seed. First 2 grows did not have this problem. I have about 2 weeks left on my current auto plants and just noticed these webs and tiny bugs on a...

About 18” from the branches.

Thanks for the info. I'll look it them instead of the tanks. Do the generators create any noticeable amount of heat? Heat would be beneficial during fall through spring, but not wanted in the summer months since I currently don't need a/c in the summer in there.

I'm doing some minor lst. With the current plants I have going, If 2 weren't "runted" and I did a little more lst they would pretty much fill the 4x4 tray without pushing into each other. 2 walls and the ceiling are silver mylar and the other 2 walls are painted white. The front small plant...

I do have natural gas in house and an unused pipe by the dryer as that's electric. It's probably 30' from the middle of the grow room. Any suggestion for better (safer) budget friendly brands for the generator? Still need a fuzzy logic controller, or is the controller built into the unit? This...

Hey all, I'm running 12 EB2 strips (BXEB-L1120Z-35E4000-C-B3 4000 LM NEUTRAL WHITE LINEAR MOD) off an HLG480 over a 4x4 tray. Finished up the first grow with these lights a couple months ago running Autos. Soil grow, temp ~80F ~65%rh average. Each plant ended up with around 2-3oz of trimmed...

Thanks.

Hey all, I've been thinking of trying Co2 and must have missed any threads with what I'm looking for. Room is 7x7x7 so 343cf. In the room, I'm running 480 "wall watts" worth of Bridgelux strips, dehumidifer and fan. Room is 90% sealed. Temps stay around 80-85F right now. What is an average...

Were your other 2 tall and thin like that? I currently have 2 NL auto fems from Seedsman going right now. Both are short and bushy. I've not grown outdoors, so not sure if they typically grow taller and thinner outdoors.