Search results

Since your climate is so dry, here's an idea that I've used to slow my drying to 10-14 days in my tent. Use an inkbird humidity controller connected to a small humidifier and a small dehumidifier. I set the inkbird at 62%. I have the dehumidifier programmed to kick on whenever the humidity...

Like Myke says, you are overfeeding. Change your res or lower your PPM to around 500 then follow the chart further down in this link. There's really no reason to go above 600 PPM in my opinion. Good luck...

What you need are 5 gallon buckets with gamma seal lid to replace the jars. Do a search for 5 gallon curing bucket.

OK. Just found the one I used. Mine was the 3 shock with 52% calcium hypochlorite. Different numbers have different crap added to them that I am not sure is OK.

Here's the best resource for mixing your own Pool Shock solution. https://www.rollitup.org/t/how-to-operate-a-sterile-hydroponic-system.849475/ I used 25 gram of the powdered pool shock to 1 gallon of distilled water to create my stock solution. I can't remember if if was the 65% type or...

Yeah. I was reluctant at first too but I've completed 2 complete grows in RDWC without the air pump without any issues. I have done it with drilling spray holes in bars just like the above(more obvious surface disturbance) or by just letting the water waterfall through the grommet or through...

You can make stock solutions of Jacks Part A & Calnit. For the Jack stock solution - mix 880 grams into 1 gallon of RO or distilled water. Warming up the water will help with dilution. For the calnit stock solution - mix 580 grams into 1 gallon of RO or distilled water. No need to warm up...

It's discussed in this attached icmag thread https://www.icmag.com/ic/showthread.php?t=304552