Well I bought a 1100btu dual hose ac for my 5x10x8 room with 2 600's. I am stumped on how i should exhaust the air. My exhaust is a 800cfm blower that goes into a return duct my my central air. Should my blower be set on high or low while the ac is running. I notices the ac never shut off yesterday.
AC never shuts off
- Thread starter vein5
- Start date
Bakatare666
Well-Known Member
Was the temp where the unit was down as low as you had the thermostat?
I would keep your exhaust on high while it's on so you're sure you have adequate flow and are not fighting yourself.
I would keep your exhaust on high while it's on so you're sure you have adequate flow and are not fighting yourself.
automated
Active Member
Sir.Ganga
New Member
1100 or 11000 btu's? Exhausting into your duct work will result in your whole house smelling dank. If it is a tent in a room and that unit is actually 11000 btu's then cool the room the tent is in and draw the cool air into the tent. I would exhaust up your chimney or somewhere else using at least a carbon filter.
jrainman
Active Member
Ok Listen this is very bad NEVER EXHAUST IN TO A CHIMNEY UNLESS YOU KNOW WHAT THE FUCK YOU ARE DOING, DO YOU KNOW IF NOT PROPERLY DONE YOU CAN KILL YES KILL EVERYONE IN THAT HOUSE.
THIS BY TRADE NAME IS CALLED INDUCING :
CERTAIN HIGHER EFFICENCY APPLIANCES HAVE WHAT IS CALL A INDUCER MOTOR ON THE EXHAUST OF THAT APPLIENCE
IN THE APP WHEN INDUCING EXHASUT IN A CHIMNEY IT MUST BE WHAT IS CALLED LINED
THIS IS DONE BY STREATCHING A CERTAIN DIA. STANLESSSTEEL LINER DOWN A EXSITING CHIMNEY
WHY BECAUSE YOU ARE INDUCING PRESSURE IN THE CHIMNEY
A STANDARD CHIMNEY MADE OF BRICK AND MOTOUR WILL LEAK AND ALSO WHEN INDUCED IT WILL PRODUCE A FAIR AMOUNT OF CONDENSATE AND A RAPID DECAY OF THE BRICK AND MOTUR WILL HAPPEN AT A FASTER RATE = MORE LEAKAGE
SO IF THIS PERSON HAS A GAS APPLIANCE (WATER HEATER) FURNANCE,BOILER ECT ECT: THE CARBON MONOXCIDE WILL ENTER THE HOME AND NOT BE PROPERLY TRANSMITTED OUT THE CHIMNEY.
i CAN GO ON AND ON WITH THE PROPER WAY TO DUE THIS ,BUT THEY ARE MANY OTHER FACTORS THAT HAVE TO BE CONSIDERD WHEN DUING THIS:
WHEN THIS IS DONE iNDUCING AIR IN TO A CHIMNEY EVERY SINGLE DWELLING WILL REQUIRE ITS OWN PLAN OF ACTION FOR THAT SPECFIC APPLICATION.
PLEASE DO NOT TRY THIS UNLESS YOU REALLY UNDERSTAND THIS CONCEPT IT IS NO JOKE A LIFE AND DEATH MATTER.
chuck estevez
Well-Known Member
This guy is FAMOUS for doing things wrong. Everything he suggests is always backwards of everyone else. It's amazing he can even grow,let alone call himself SIR GANJA, What a joke.
chuck estevez
Well-Known Member
this may help you
OK sorry for the confusion, the exhaust for the whole grow room goes into my central air return with a 10 in scrubber. The out and intake from the air conditioner come from the outside like a window unit so the hot air from the air condition go out the window. I guess what I'm asking should the whole room exhaust be on low or high. If its on high won't it just suck the cold air out of the room. How do you guys do it
ILoveYouSweetLeaf
Well-Known Member
chuck estevez
Well-Known Member
do you have a intake for the room?
chuck estevez
Well-Known Member
i would put the exhaust on a timer for a few minutes every hour.
chuck estevez
Well-Known Member
if your not supplementing c02, it would be to bring in fresh c02.
Similar threads
