Aero misters? HD!!

H

havefungodumb

Well-Known Member
what you guys think of the home depot misters lol no shit they got misters anyone got any info on em? or using em with good results :).???

you guys seen this stuff i actually found a pic :)

i think the brown ones are the best because they spray 360 quite a few spray lines in pic when i saw the package.

anyways the bigger fat ones might have a good mist!

im gonna check them out right now

what you guys thinks better 1 hole for mister or 2,

2) what are the easy cloners 1 hole or more than 1?
 
H

havefungodumb

Well-Known Member
i helped my friend put in his misters into 3/4 pvc, maybe i was spose to use 1/2 pvc for his mister setup

but anyways i couldnt screw them in i think i used a 1/8 drill bit then had to make it a bit bigger, wouldnt screw in ended up smashing them in, with a thread turn more to do

will they do? there in there good!
 
robotninja

robotninja

Well-Known Member
don't use em, they are crap. They clog just from hard water alone, let alone nutrient filled water.

You gotta get Ez-Clone sprayers, they sell em at hydro stores or you can order em online. Don't use the homedepot/lowes sprayers, I made the mistake of trying them out before the Ez-Clones and they clogged super quick.
 
H

havefungodumb

Well-Known Member
i helped my friend put in his misters into 3/4 pvc, maybe i was spose to use 1/2 pvc for his mister setup im doing that for mine


but anyways i could not screw them in i think i used a 1/8 drill bit then had to make it a bit bigger, would not screw in!! ended up smashing them in then they threaded maybe 1 or 2 circles

will they do? they in there pretty good what you think?
 
bobbyboy34

bobbyboy34

Well-Known Member
ez clone sprayers are cheap, get a whole bunch of em, have some for backup....don'ttrust those HD misters, the suck bigger balls than male MJ plants
 
AeroKing

AeroKing

Well-Known Member
I'm 99% sure that those are drippers, not misters. I've seen those kits online. Thats why they have the stakes with them.
 
potpimp

potpimp

Sector 5 Moderator
I second the ez clone sprayers. You want the red ones. I've use the HD ones they do suck.
 
Das Jackal

Das Jackal

Active Member
Hey just throwing this out there, if you take 1/4" tubing and melt/cap off the end of the tubing and then poke tiny holes with a needle, you can make own misters/jets. I didnt think it would work but my girl proved me wrong and now I took out all my misters and she made me some that work way better. Just poke the holes in a circular pattern near the tip of the tubing. Believe me it works pretty damn well. Instead of only having a 360' pattern I know have a whole s*** load of little tiny water jets. I ll put up a few pics if anyone is interested.
 
AeroKing

AeroKing

Well-Known Member
Das Jackal said:
Hey just throwing this out there, if you take 1/4" tubing and melt/cap off the end of the tubing and then poke tiny holes with a needle, you can make own misters/jets. I didnt think it would work but my girl proved me wrong and now I took out all my misters and she made me some that work way better. Just poke the holes in a circular pattern near the tip of the tubing. Believe me it works pretty damn well. Instead of only having a 360' pattern I know have a whole s*** load of little tiny water jets. I ll put up a few pics if anyone is interested.
Click to expand...
General Hydroponics uses a "laser drilled spray line" in the aeroflo2 systems. It's really just a tube with holes in it like you're talking about. It does work, very damn well.
 
morrisgreenberg

morrisgreenberg

Well-Known Member
Das Jackal said:
Hey just throwing this out there, if you take 1/4" tubing and melt/cap off the end of the tubing and then poke tiny holes with a needle, you can make own misters/jets. I didnt think it would work but my girl proved me wrong and now I took out all my misters and she made me some that work way better. Just poke the holes in a circular pattern near the tip of the tubing. Believe me it works pretty damn well. Instead of only having a 360' pattern I know have a whole s*** load of little tiny water jets. I ll put up a few pics if anyone is interested.
Click to expand...
, the aeroflo is a 1/2inch tube with holes near the net pots, the 1/2pvc, to make life easier work great when you use the smallest drill bit i think 1/16th, i drilled too many and lost much water pressure, so if your gonna use it only make the holes near net pots and only make a few
 
bobbyboy34

bobbyboy34

Well-Known Member
Das Jackal said:
Hey just throwing this out there, if you take 1/4" tubing and melt/cap off the end of the tubing and then poke tiny holes with a needle, you can make own misters/jets. I didnt think it would work but my girl proved me wrong and now I took out all my misters and she made me some that work way better. Just poke the holes in a circular pattern near the tip of the tubing. Believe me it works pretty damn well. Instead of only having a 360' pattern I know have a whole s*** load of little tiny water jets. I ll put up a few pics if anyone is interested.
Click to expand...
you're girlfriend owns you!

and the ez cloner misters owns your girl

go with the misters unless you are hurt for doe, don't blame you if you are, the eco is trucked up!
 
H

havefungodumb

Well-Known Member
AeroKing said:
General Hydroponics uses a "laser drilled spray line" in the aeroflo2 systems. It's really just a tube with holes in it like you're talking about. It does work, very damn well.
Click to expand...
is that so

i saw that black tubing i knew the shit was cool lol i wanted to get some to try and play with, would i be able to?
didnt see it at my hardware store maybe i could try in town?
 
robotninja

robotninja

Well-Known Member
as long as each plant is getting wet, it doesn't matter how many sprayers you got. I think mine has 10 sprayers for 6 plants which is totally overkill, shoulda used 6, oh well.
 
DubB83

DubB83

Well-Known Member
I have 8 on 6 plants, the sprayers are between the net pots to keep roots from clogging the sprayers as fast.
 
You must log in or register to reply here.
Top