Best screen for scrog?
- Thread starter Mr John
- Start date
ninezeroseven
Member
chicken wire from lowes. 10 bucks and have a ton left over.
Mr John
Active Member
GrowerGoneWild
Well-Known Member
Twine is good.. Easy to cut the plant out.. Easier to manipulate. Not so rigid. Less likely to cut into stems.
Chiken wire works, easy to setup. Fixed hole size and better for training, harder for the plant to move the wire.. Can cut into stems.. A bit harder to cut the plant out.
I like furring strips, wide enough to put staples on to hold the wire and not too heavy..
Chiken wire works, easy to setup. Fixed hole size and better for training, harder for the plant to move the wire.. Can cut into stems.. A bit harder to cut the plant out.
I like furring strips, wide enough to put staples on to hold the wire and not too heavy..
tip top toker
Well-Known Member
I just used the roll up green plastic mesh and cable tied it to a PVC frame. Worked just fine, hardly cost a thing.
FrozenChozen
Well-Known Member
I scrog with this beast.... its nylon surveyors string and 1/2" pvc pipe with some screws in it every ~2".... If you make one make sure you measure to the OUTER diameter of the pvc if fitting to a tent or closet... the screen holes are adjustable for training purposes and synthetic to avoid any mold issues.... this and a 600 watt light got me nearly 400g with 20 days of veg
Mr John
Active Member
I scrog with this beast.... its nylon surveyors string and 1/2" pvc pipe with some screws in it every ~2".... If you make one make sure you measure to the OUTER diameter of the pvc if fitting to a tent or closet... the screen holes are adjustable for training purposes and synthetic to avoid any mold issues.... this and a 600 watt light got me nearly 400g with 20 days of veg
Just what I need, thank you for sharing. Headed to home depot tomorrow!
FrozenChozen
Well-Known Member
6 plants...
Mr John
Active Member
My first attempt at a scrog screen. Is it too tall? I figure i need to allow for the stretch and i feel with these strains C99, chocolate fondue
that the height its at now should work. I made it from 3/4 pvc tubing and cheap plastic pet netting, the holes are only 1x1 but as they get near the net i can easily cut the proper size out. It's probably over engineered but i wanted some sturdy in anticipation of huge and plentiful colas.
Here is my other garden growing under my Vipar 600w LED light. They are also c99 and chocolate fondue strains. Will be interesting to see how the LED compares to my Indagrow 420 induction light.
Attachments
Last edited:
Mr John
Active Member
PS I left the back net on to keep the ladies orderly, growing in a tent can be a pain when you need to manage the backside of the plants. This way the net will keep them growing up towards the light and not out into the side of the tent.
A few more shots of the DWC/Vipar setup and my E/F IndaGrow 420.
A few more shots of the DWC/Vipar setup and my E/F IndaGrow 420.
Gone Camping
Active Member
Looks good..
Consider your final pot height and add roughly 8" to your screen level. Keep in mind how your going to manage your runoff, you'll probably want to slip a container under to collect it.
LST and trimming away the undergrowth, you'll need space to work under. I find elevating the pot makes it easier than being so close to the floor, so long as you have the height for it. Being in a taller tent your good to go.
I use twine as well, as said earlier it's easy to cut away at harvest time.
Having experience with this strain you'll have a good idea on how much stretch to figure when screen is full.
Consider your final pot height and add roughly 8" to your screen level. Keep in mind how your going to manage your runoff, you'll probably want to slip a container under to collect it.
LST and trimming away the undergrowth, you'll need space to work under. I find elevating the pot makes it easier than being so close to the floor, so long as you have the height for it. Being in a taller tent your good to go.
I use twine as well, as said earlier it's easy to cut away at harvest time.
Having experience with this strain you'll have a good idea on how much stretch to figure when screen is full.
Mr John
Active Member
Thanks gone, I also bought twine as a backup incase the plastic net cuts into the trunks or stems. That is my only concern using plastic. I also thought when I cut out the holes to allow the plants through I can use masking tape or something to keep any sharp edges from damaging.
I almost went with the twine but was unsure how to tie it up so it wouldn't slide on the pvc tubes.
I almost went with the twine but was unsure how to tie it up so it wouldn't slide on the pvc tubes.
Similar threads
