EmancipateWE
Member
What's going on everyone. I got a situation here. Although I'm a regular smoker, I never woulda thought my first grow wouldn't be smoked by me. I have one family member with pancreatic cancer and another with more brain tumors than I can count on my two hands. So, the essence of the situation is I'm growing for medicinal purposes and plan on "distilling" (not sure if thats the right way too put it) with alcohol. Kind of a last resort, "If you can't get better, at least you'll be comfortable". It's awful to watch someone go through chemo.
Here's the basic of what I'm setting up.
W5.5' x D5' x H7' room in a warehouse/garage setting (only practical/safe setting available. It's a cold space)
Built a frame out of 2x4s inside which leaves two areas both 3.75' x 2'. One is just under 4 ft tall, the other about 3.5.
Each area will be lined with foil-faced foam board 1/2 inch thick. (I have alot laying around)
I have two 4 in. inline duct fans 80 cfm's each (one for each compartment. too much?) and a DIY carbon filter. I plan on sealing the foam board with metallic duct tape to keep out too much draft. I have been planning on using cfl's due to budget. My original idea for lights was to build a rectangular 1x4 box and top with a white kitchen backsplash material (as a reflector), placed on chains to raise and lower. I have a crate of porcelain fixtures so I was gonna try to place maybe 5 down the long sides of it, and if needed another one on both the short sides.
Also I already bought a 12 pack of 2700k cfls from HomeDepot. I planned on vegging in the smaller chamber and flowering in the bigger.
So here's the questions I have:
1. Thoughts about lighting idea? Will that reflect enough? I've seen people putting the lights in/around the plants, I don't know how to go about having a fully adjustable fixture. (anyone know of some cheap "gooseneck style" simple fixtures)
2. Think 10 cfl's will heat the box up enough so I don't have to provide additional heat? I think I have some baseboard heaters laying around but I'm concerned about my amp draw. It's on a 20 amp breaker, along with two 2 tube 8ft fluorescent fixtures and a few 100 watt incandescents for the main room.
I was using a chop saw to build which drew 13 amps, it dimmed the lights but never tripped the breaker.
3. How many plants should I attempt to fit?
4. Any suggestions on strains? I've been looking at marijuana-seeds.nl and considering the HASH PLANT, THC BOMB, or HINDU KUSH.
5. I don't really have any play but is the height of the compartments tall enough.
6. Think I need to insulate the walls of the room/closet itself?
7. Any and all suggestions are very welcomed.
Here's the basic of what I'm setting up.
W5.5' x D5' x H7' room in a warehouse/garage setting (only practical/safe setting available. It's a cold space)
Built a frame out of 2x4s inside which leaves two areas both 3.75' x 2'. One is just under 4 ft tall, the other about 3.5.
Each area will be lined with foil-faced foam board 1/2 inch thick. (I have alot laying around)
I have two 4 in. inline duct fans 80 cfm's each (one for each compartment. too much?) and a DIY carbon filter. I plan on sealing the foam board with metallic duct tape to keep out too much draft. I have been planning on using cfl's due to budget. My original idea for lights was to build a rectangular 1x4 box and top with a white kitchen backsplash material (as a reflector), placed on chains to raise and lower. I have a crate of porcelain fixtures so I was gonna try to place maybe 5 down the long sides of it, and if needed another one on both the short sides.
Also I already bought a 12 pack of 2700k cfls from HomeDepot. I planned on vegging in the smaller chamber and flowering in the bigger.
So here's the questions I have:
1. Thoughts about lighting idea? Will that reflect enough? I've seen people putting the lights in/around the plants, I don't know how to go about having a fully adjustable fixture. (anyone know of some cheap "gooseneck style" simple fixtures)
2. Think 10 cfl's will heat the box up enough so I don't have to provide additional heat? I think I have some baseboard heaters laying around but I'm concerned about my amp draw. It's on a 20 amp breaker, along with two 2 tube 8ft fluorescent fixtures and a few 100 watt incandescents for the main room.
I was using a chop saw to build which drew 13 amps, it dimmed the lights but never tripped the breaker.
3. How many plants should I attempt to fit?
4. Any suggestions on strains? I've been looking at marijuana-seeds.nl and considering the HASH PLANT, THC BOMB, or HINDU KUSH.
5. I don't really have any play but is the height of the compartments tall enough.
6. Think I need to insulate the walls of the room/closet itself?
7. Any and all suggestions are very welcomed.