ez cloner help

teamintegra94 · Mar 28, 2012

anyways i have an ez cloner 30 site cuttings have been in for four days now no signs of roots/bumbs/white wood at all.
im using a 105 watt cfl 1 foot above 18/6. ph 5.5 used clonex gel. a few of them are wilting but not bad all still nice and green no slime in the rez i notice at night they pick themselfs up (maybe ligts to close) but my main thing is the roots when should i start to see roots. i have skywalker og, blue dream, grape ape and hawaiian mango kush cuttings. 45 degree cut dipped into clonex gel temps are at 72-76 in rez/water ph at 5.5 tap water.

wormdrive66 · Mar 28, 2012

Ph should be 5.8-6.2, move the light 3-5 feet away. leave the light on 24 hrs. takes 8-15 days before you will see any roots. Good luck hope they make it.

teamintegra94 · Mar 28, 2012

wormdrive66 said:
Ph should be 5.8-6.2, move the light 3-5 feet away. leave the light on 24 hrs. takes 8-15 days before you will see any roots. Good luck hope they make it.

Thank you I'll up the ph a bit move the light up and also try the 24 hour light. +1 rep. ill let you know how they turn out with some pics

wormdrive66 · Mar 28, 2012

No problem dude, let me know if you need any help. I have the same cloner. Love that thing.

teamintegra94 · Mar 28, 2012

wormdrive66 said:
No problem dude, let me know if you need any help. I have the same cloner. Love that thing.

Ya i heard its really good and i never had much succes rate using a clone dome only had about 20% succes rate so i went and bought one of these and the cuttings r looking nice but 4 days no signs of roots at all i guess i just need to wait it out i just have no patience i guess. but they all still look good so thats a plus

sfttailpaul · Mar 28, 2012

teamintegra94 said:
Ya i heard its really good and i never had much succes rate using a clone dome only had about 20% succes rate so i went and bought one of these and the cuttings r looking nice but 4 days no signs of roots at all i guess i just need to wait it out i just have no patience i guess. but they all still look good so thats a plus

Try to keep in mind that cuttings (no roots) get their moisture from the individual leaves, and not their stem. The object is to mist the stem occasionally, not soak them. There is a fine line between moist and wet. The roots can come as fast (IMH exp.) as 7 days and more typically, as long as 10 to 15, so be patient. I have clone machines too and I have my misting at 10-15 seconds, 6X/day. I use a dome that I vent once a day for at least 1-1/2 to 2 hours.
Some strains take a lot longer. I once had cuttings that took 13+ weeks to root. I almost tossed them a few times but hung in there. Glad I did as I kept them going due to the vibrant green leaves that were present. That's your indicator to signal that the cuttings are viable. Best of success to you, luck plays a minor role here...

colonuggs · Mar 28, 2012

no misting nessary after day 1...ph to 6... temps 70-80.....some strains take a week... most take 10-14 days to show any roots or bumps...some take longer

wormdrive66 · Mar 28, 2012

sfttailpaul said:
Try to keep in mind that cuttings (no roots) get their moisture from the individual leaves, and not their stem. The object is to mist the stem occasionally, not soak them. There is a fine line between moist and wet. The roots can come as fast (IMH exp.) as 7 days and more typically, as long as 10 to 15, so be patient. I have clone machines too and I have my misting at 10-15 seconds, 6X/day. I use a dome that I vent once a day for at least 1-1/2 to 2 hours.
Some strains take a lot longer. I once had cuttings that took 13+ weeks to root. I almost tossed them a few times but hung in there. Glad I did as I kept them going due to the vibrant green leaves that were present. That's your indicator to signal that the cuttings are viable. Best of success to you, luck plays a minor role here...

ez cloner has no dome and the mist is on 24/7 there is no adjustment.

teamintegra94 · Mar 28, 2012

sfttailpaul said:
Try to keep in mind that cuttings (no roots) get their moisture from the individual leaves, and not their stem. The object is to mist the stem occasionally, not soak them. There is a fine line between moist and wet. The roots can come as fast (IMH exp.) as 7 days and more typically, as long as 10 to 15, so be patient. I have clone machines too and I have my misting at 10-15 seconds, 6X/day. I use a dome that I vent once a day for at least 1-1/2 to 2 hours.
Some strains take a lot longer. I once had cuttings that took 13+ weeks to root. I almost tossed them a few times but hung in there. Glad I did as I kept them going due to the vibrant green leaves that were present. That's your indicator to signal that the cuttings are viable. Best of success to you, luck plays a minor role here...

I have no dome for them as i am using an ez cloner which come with no dome i heard and was told to use no dome i mist them once a day on top and let my misters in the rez run 24/7 but i do have a 1 on 4 off timer dont i dont use which i might next run thanks for the advice i think the light is to close and my ph is to low as which worm has stated... My leafs are still nice and green some are a lil wilted but not much and i didnt not cut any of the leafs which i might start cutting them back half way next run.

teamintegra94 · Mar 28, 2012

wormdrive66 said:
ez cloner has no dome and the mist is on 24/7 there is no adjustment.

i have a 1 on 4 off timer i can use but right now i just have it on 24/7 "misters"

teamintegra94 · Mar 28, 2012

colonuggs said:
no misting nessary after day 1...ph to 6... temps 70-80.....some strains take a week... most take 10-14 days to show any roots or bumps...some take longer

thanks for the info my ph is as stated 5.5 temps between 72-76 I have skywalker og, blue dream, grape ape and hawaiian mango kush. I guess ill just have to be patient. atleast theres no slime "algae" build up stems lookin good leafs r nice n green.

wormdrive66 · Mar 28, 2012

I think this was around 9 days with the mister on 24/7. I foliar sprayed once or twice. The ones with little or no roots are Harlequin and they did not survive or root. The rest are alive and well.

dannyboy602 · Mar 28, 2012

teamintegra94 said:
anyways i have an ez cloner 30 site cuttings have been in for four days now no signs of roots/bumbs/white wood at all.
im using a 105 watt cfl 1 foot above 18/6. ph 5.5 used clonex gel. a few of them are wilting but not bad all still nice and green no slime in the rez i notice at night they pick themselfs up (maybe ligts to close) but my main thing is the roots when should i start to see roots. i have skywalker og, blue dream, grape ape and hawaiian mango kush cuttings. 45 degree cut dipped into clonex gel temps are at 72-76 in rez/water ph at 5.5 tap water.

clones dont need much light. see my pic of my veg room they are pretty far away. i get roots in one to two weeks.

...and i don't use a clone gel. the plant makes it's own rooting hormone.

ArthritisSuffering · Mar 28, 2012

Leave it on 24/7. I see roots in 5-6 days, be sure to slit bottom of clone, not to deep.

teamintegra94 · Mar 28, 2012

wormdrive66 said:
I think this was around 9 days with the mister on 24/7. I foliar sprayed once or twice. The ones with little or no roots are Harlequin and they did not survive or root. The rest are alive and well.

View attachment 2095683

very nice roots ill prob just wait it out and let the cloner do its job after i adjust the lighting and ph

teamintegra94 · Mar 28, 2012

dannyboy602 said:
clones dont need much light. see my pic of my veg room they are pretty far away. i get roots in one to two weeks.
View attachment 2095684

...and i don't use a clone gel. the plant makes it's own rooting hormone.

yes very nice i already moved my light back off im thinking about using my t5 24 watt for it insted of the 105 watt cfl

840/2 · Mar 28, 2012

teamintegra94 said:
Ya i heard its really good and i never had much succes rate using a clone dome only had about 20% succes rate so i went and bought one of these and the cuttings r looking nice but 4 days no signs of roots at all i guess i just need to wait it out i just have no patience i guess. but they all still look good so thats a plus

I have the same machine and mine took 14 days to show, you'll be fine.

teamintegra94 · Mar 28, 2012

ArthritisSuffering said:
Leave it on 24/7. I see roots in 5-6 days, be sure to slit bottom of clone, not to deep.

thanks hopfullt ill be able to see some action with my girls in the next 2-3 days today is only day 4 im just not patient as i am seeing people range 10-12 days 7-12 days ill just give it time and hopfully my girls will have some nice long white roots

teamintegra94 · Mar 28, 2012

840/2 said:
I have the same machine and mine took 14 days to show, you'll be fine.

thanks i can use all the info that is givin im a new grower but i had no probs with veg and flower stages but once i hitting cloning i got knocked on my ass

teamintegra94 · Mar 28, 2012

heres a pic not sure if you guys can see it very well

ez cloner help

Member

Well-Known Member

Member

Well-Known Member

Member

Active Member

Well-Known Member

Well-Known Member

Member

Member

Member

Well-Known Member

Well-Known Member

Member

Member

Member

Active Member

Member

Member

Member

Similar threads