wondering about co2 ?? i have everything I need put was wondering how much to use and how often.. my room size is 8 foot hight long and wide I just started my ak-47 clones(25) in rock wool in 1 gallon pots in the veg stage now under t5 lights feeding to drain twice a day 200ml per feed ....hope someone can help. if you need more info let me know thanks velcro
how to use co2 the rightway
- Thread starter velcro007
- Start date
sorry tried pics be cant do it . as far as the co2 I have the regulater that goes on the tank I have the co2 tank and a control panel that controls heat humidity /co2 very pricey but anyway iam not sure if iam just going to put co2 on a timer to rlease it when I what ?? no sure other equipement in room is a sulfhuf burner a charcoal scrubber 2 600 what hps / ac unit 3in 1 / 20 gallon res with pump for feed to drain system / 24,7 ph/ppm/temp monitor cogo nutes // fans etc I use flock wool in one gallon pots with stone on bottom and top for algee.......green lights etc I grow around 25 plants per grow I have a license for 42 plants my room is 8x8x8 ..when and how much should I use co2 ????sorry about the spelling typing fast
chuck estevez
Well-Known Member
You would have to do some serious math to figure out c02 release with a timer. A monitor will measure it in ppms and hopefully have a photocell which turns it off and on with the lights. If you don't have a constant steady ppm the whole light cycle and then off with the lights, your just spinning your wheels. you got the equipment to do it right, why not do it right?
4lomo
Active Member
Set your controller to 1300-1500 ppm CO2. Start using it about a week after the 12/12 flip. Once you have all your gear hooked up to the controller it should regulate the room within the parameters you set. Run the CO2 tubes either over the canopy, or run the tube to the back of a oscillating fan. Make sure the fan is above the canopy, cause CO2 is heavier than than air.
