Mr Green Man
Well-Known Member
Hello all.
This is a bit of a long one but thank you anyone who took the time to read it threw.
I am about to enter flowing for the first time and have been planning the next few weeks, I have done about 100hours of reading threads and guides so I think I have a good idea of how and what I should do.
I will lay it all out for you and it would be great if you could give me a second opinion or point out anything I may have missed. Don't be shy I want to hear you opinion.
The Set Up
90x75x200cm Grow Space
400HPS
Air In - 4" Fan+ Carbon Filter
Air out - 6" Fan (250 M3 PerHour) No carbon filter
Air movement - 8" desk fan, suspended above plant tops/under light.
Room Temp 27c
Humidity 40%-50%
2x 25L Rez
450Lph air pumps (Each Rez)
3x 6" air stones (Each Rez)
1x Small power head (Each Rez)
Rez Temp 18c-20c
Nutes
Canna Aqua
Canna Zym - Use as per instructions (In The Post)
Canna PK 13-14 - Use as per instructions (in The Post)
Liquid Silica 5% (18ml per rez)
Liquid Karma (In the Post)
Plants
8x AK47 from clones.
This was from a batch of clones that got over fertilized, I managed to rescue 8 of them and put them into this system where they have been doing very well.
They have been growing very fast for 20 days not and I think it is about time to start flowing them, if I imagine that they will double or triple in size they should fill the space nicely.
As you can see from the pics, some are doing better than others. I put the best ones in Rez 1 (Left) and they have always been about 4 days growth in front of the rest.
The big one at the front was the healthiest of the clones and you can really see the difference a good clone makes.
The Plan.
I plan to start flowing by first flushing for two days. in PH 5.6 water + Liquid Silica.
I will then increase the Nute level to EC1.3 (I don't think I will have my new products by then and Im not sure how they will effect the E.C level)
I'm thinking 1.3 because it is currently at 1.1 but dropped to 0.9 without me adding water.
Okay, a few questions and pictures.
How Am I looking?
Are they big enough to start flowing?
Any signs of difference?
Pic 4: This is on just a couple of the leaves?
It does't seem to be spreading. I think I have seen it somewhere before but can't remember what it was?
Well thats it, I wish they all looked like the big plant at the fron but hey, next time.
I would love to hear from you so please tell me what you think.
Thanks everyone.
This is a bit of a long one but thank you anyone who took the time to read it threw.
I am about to enter flowing for the first time and have been planning the next few weeks, I have done about 100hours of reading threads and guides so I think I have a good idea of how and what I should do.
I will lay it all out for you and it would be great if you could give me a second opinion or point out anything I may have missed. Don't be shy I want to hear you opinion.
The Set Up
90x75x200cm Grow Space
400HPS
Air In - 4" Fan+ Carbon Filter
Air out - 6" Fan (250 M3 PerHour) No carbon filter
Air movement - 8" desk fan, suspended above plant tops/under light.
Room Temp 27c
Humidity 40%-50%
2x 25L Rez
450Lph air pumps (Each Rez)
3x 6" air stones (Each Rez)
1x Small power head (Each Rez)
Rez Temp 18c-20c
Nutes
Canna Aqua
Canna Zym - Use as per instructions (In The Post)
Canna PK 13-14 - Use as per instructions (in The Post)
Liquid Silica 5% (18ml per rez)
Liquid Karma (In the Post)
Plants
8x AK47 from clones.
This was from a batch of clones that got over fertilized, I managed to rescue 8 of them and put them into this system where they have been doing very well.
They have been growing very fast for 20 days not and I think it is about time to start flowing them, if I imagine that they will double or triple in size they should fill the space nicely.
As you can see from the pics, some are doing better than others. I put the best ones in Rez 1 (Left) and they have always been about 4 days growth in front of the rest.
The big one at the front was the healthiest of the clones and you can really see the difference a good clone makes.
The Plan.
I plan to start flowing by first flushing for two days. in PH 5.6 water + Liquid Silica.
I will then increase the Nute level to EC1.3 (I don't think I will have my new products by then and Im not sure how they will effect the E.C level)
I'm thinking 1.3 because it is currently at 1.1 but dropped to 0.9 without me adding water.
Okay, a few questions and pictures.
How Am I looking?
Are they big enough to start flowing?
Any signs of difference?
Pic 4: This is on just a couple of the leaves?
It does't seem to be spreading. I think I have seen it somewhere before but can't remember what it was?
Well thats it, I wish they all looked like the big plant at the fron but hey, next time.
I would love to hear from you so please tell me what you think.
Thanks everyone.
Attachments
-
70.4 KB Views: 36
-
78.1 KB Views: 32
-
96 KB Views: 16
-
49.3 KB Views: 12