my 3 stages of flower

superstoner1

superstoner1

Well-Known Member
the new triple vegger is close to being done. waiting on pump and drain fittings. manifold is ready, and the white cooler is veg res, the blue cooler is chiller res, and cloner will just sit on floor and use residual light.
 

Attachments

superstoner1

superstoner1

Well-Known Member
its the manifold to feed all three veg tubs. i used 1" from the pump to the valves that are 3/4" . i just dont like cuttint sides of totes, it goes down through lid to sprayers.
 
superstoner1

superstoner1

Well-Known Member
super recipe for veg using botanicare pro( per gallon of water, in ml)
pbp grow 8
lk 3
calmag 2
aquashield 6
silica blast 4
great white 2 scoops for 25gal
then flush with 150ml clearex for 24hrs before rotate to flower
 
superstoner1

superstoner1

Well-Known Member
super recipe for flower weeks 1 and 2(per gal of water in ml)
pbp grow 5
pbp bloom 5
lk 2
calmag 2
aquashield 3
sweet raw 4
silica blast 3
great white 3scoops to 50gal
then flush with 150 ml clearex for 24hrs
 
superstoner1

superstoner1

Well-Known Member
super recipe for flower weeks 3-5(per gal of water, in ml)
pbp bloom 10
lk 2
calmag 2
aquashield 3
sweet raw 6
silica blast 3
hydroplex 3
great white 3scoops
then flush with 150ml clearex for 24hrs
 
superstoner1

superstoner1

Well-Known Member
super recipe for flower weeks 5-8(or til finished)(per gal of water, in ml)
pbp bloom for soil 10
lk 2
calmag 2
aquashield 3
sweet raw 8
silica blast 3
hydroplex 4
no great white
 
oceangreen

oceangreen

Well-Known Member
Alternatives:

Clearex - a flushing solution, the idea is to clean your tank and remove salts.
does distilled vinegar work on this one?

silica blast - is a silica solution that aids plants in many ways. Alot of companies make this. I use DYNA GROW PROTEKT

Great white - pondzyme' from pool places?
 
oceangreen

oceangreen

Well-Known Member
SS for the the support rail system for the posts ( flowering system) are you using 3/4 PVC or 1" PVC?

Also in the 2 Inch drain pipe, How did you cut rectangles in the pipe and made sure they fit well??
 
superstoner1

superstoner1

Well-Known Member
vinegar, not sure. but flushing is important to prevent lockout and keep plants happy, esp if using high nutes levels(1000+ppm).
silica is an important additive. it makes the plant much stronger.
i am using pondzyme now instead of greatwhite, price difference is huge.
 
sqydro

sqydro

Active Member
thanks for ur pearls of wisdom mate! great post(s) do u add the GW powder straight in? i make bennifiac compost tea with GW is it advisable to run that or straight powder better becuase of the organics?
 
superstoner1

superstoner1

Well-Known Member
sqydro said:
thanks for ur pearls of wisdom mate! great post(s) do u add the GW powder straight in? i make bennifiac compost tea with GW is it advisable to run that or straight powder better becuase of the organics?
Click to expand...
i add the powder to the res and use a cordless drill with a 5gal paint mixing attachment to mix the res. 10sec and done. not a big fan of teas. opens a lot of bad doors if not done right and for the work there is not enough benefit.
 
superstoner1

superstoner1

Well-Known Member
man, my 4yo probably knows lowes better than most of their employees. we just walk the aisles, he asks a thousand questions and i get a thousand ideas. then we get icecream.lol.
 
superstoner1

superstoner1

Well-Known Member
its a framed room using 5/8" osb as interior walls,2x4 studs, foam sheet then r13 fiberglass insulation. exterior is drywall. i seal inside of room, it doesnt make it to the drywall. anywhere wood meets wood it got caulked, then 5 coats of rubber paint. and double seals on the doors.
 
oceangreen

oceangreen

Well-Known Member



  • View attachment 2233188


    SS, are these about right...measurements

    1. what dremel head do you use to cut the 2 inch pvc? just got one. first time using it so be easy on me..
    2. I am using pipes and not post, so I have to mark around the edge of the pipe, bottom part and cut the shape( kinda like a semi oval). can this be done with the dremel?...

    3. You 2 inch T drain seem to be sitting around the 2 inch cutout...? so the tee actuall does NOT go in the rez hole. am I right??​




 
You must log in or register to reply here.
Top