SnailPowered
Well-Known Member
This was my project today. I used two Sterilite 12"x12" 3 drawer plastic drawer sets from my local super market and used a router to cut a big hole in the top of the one that would go on bottom, then I used RTV to join them together.
![](/proxy.php?image=http%3A%2F%2Fi188.photobucket.com%2Falbums%2Fz86%2FSnailPowered%2FIMG_0786_zpssqznj2ud.jpg&hash=8340ad3b141066cdf0cd975245322c92)
![](/proxy.php?image=http%3A%2F%2Fi188.photobucket.com%2Falbums%2Fz86%2FSnailPowered%2FIMG_0787_zps6fjnu8hm.jpg&hash=9a1e4f491dffc76d1379cfc6078bb7b1)
I then used the router to cut out the bottoms of the drawers, leaving about 1" to attach the plastic mesh I will be adding later. This will allow air to flow through all drawers and out the top of the stack.
![](/proxy.php?image=http%3A%2F%2Fi188.photobucket.com%2Falbums%2Fz86%2FSnailPowered%2FIMG_0788_zpsc9upot7e.jpg&hash=9f6317cd06708cfc7dc0e8b7e0ee4961)
![](/proxy.php?image=http%3A%2F%2Fi188.photobucket.com%2Falbums%2Fz86%2FSnailPowered%2FIMG_0789_zpsksbrpf2r.jpg&hash=c16a7120fa105faf2690dd5b1ec49f93)
Once completed I will cut a 6" hole in the top and attach a dryer hose wall mount then have a $24 Ventech 240 CFM fan to suck the air. I figure this should get my buds good and dried out in about a week. The fan won't be directly on top like it is here, I will use some 6" tube to move the fan a bit away. The whole thing will sit on top of my brewing burner to allow air through the bottom without being near something that will collect a lot of dust.
![](/proxy.php?image=http%3A%2F%2Fi188.photobucket.com%2Falbums%2Fz86%2FSnailPowered%2FIMG_0791_zps2varrvox.jpg&hash=c2268c38a568f26c6b4c64c358f79a8e)
![](/proxy.php?image=http%3A%2F%2Fi188.photobucket.com%2Falbums%2Fz86%2FSnailPowered%2FIMG_0786_zpssqznj2ud.jpg&hash=8340ad3b141066cdf0cd975245322c92)
![](/proxy.php?image=http%3A%2F%2Fi188.photobucket.com%2Falbums%2Fz86%2FSnailPowered%2FIMG_0787_zps6fjnu8hm.jpg&hash=9a1e4f491dffc76d1379cfc6078bb7b1)
I then used the router to cut out the bottoms of the drawers, leaving about 1" to attach the plastic mesh I will be adding later. This will allow air to flow through all drawers and out the top of the stack.
![](/proxy.php?image=http%3A%2F%2Fi188.photobucket.com%2Falbums%2Fz86%2FSnailPowered%2FIMG_0788_zpsc9upot7e.jpg&hash=9f6317cd06708cfc7dc0e8b7e0ee4961)
![](/proxy.php?image=http%3A%2F%2Fi188.photobucket.com%2Falbums%2Fz86%2FSnailPowered%2FIMG_0789_zpsksbrpf2r.jpg&hash=c16a7120fa105faf2690dd5b1ec49f93)
Once completed I will cut a 6" hole in the top and attach a dryer hose wall mount then have a $24 Ventech 240 CFM fan to suck the air. I figure this should get my buds good and dried out in about a week. The fan won't be directly on top like it is here, I will use some 6" tube to move the fan a bit away. The whole thing will sit on top of my brewing burner to allow air through the bottom without being near something that will collect a lot of dust.
![](/proxy.php?image=http%3A%2F%2Fi188.photobucket.com%2Falbums%2Fz86%2FSnailPowered%2FIMG_0791_zps2varrvox.jpg&hash=c2268c38a568f26c6b4c64c358f79a8e)