Veg Cab Help. Thanks.

14" Depth
22" Height
18" Wide

Door on Hinges, Weatherstrip if possible. I'm going to caulk all the inside to make sure the sides are light proof. Probably just going to use plywood. Suggestions?

- Intake fan
- Out-take fan
- Portable digital thermometer/humidity meter.
- Mylar or freshly white painted walls. (If mylar is unavailable)
- Four 6" Pots. (For Veg until flowering/then transplant) If possible.
- Two 42 or 45 watt Cfl's for veg + Ballast.
- Small 5" or 6" fan for the stems.
- Shelves for plant's being close to light, etc. Screen for SCROG method.
- Soil (Has bat guano poop?, worm castings, etc.) No slow release ferts.
- Possible nutes, 9-11-9 about 4 weeks into veg.
- Something to muffle fan? (suggestions?)
- Aurora Indica Seeds from Nirvana

- I have a germination/seedling cab if I decide to take clones or anything. I have a 2 foot floro tube, if I decide to use that, and will build some kind of set-up to adjust them up and down as needed.

- Please leave me any suggestions, or problems you will see in this design set-up or any items I left off. Please take into consideration this is a Veg Cab and flowering will be done in a closet about 6 Feet tall, 3 feet wide, by probably 2 or 3 foot depth, under an HPS and a bigger screen for Scrog. Just look at my list for the set-up, and I can see if there is anything I'm missing, and I can also put together prices for the stuff I do not have. REMEMBER: This is just a veg cab. I only want the plants grown to about 14 maybe 16 inches under a scrog screen, so I want them short and bushy, and will move them into the flowering room to flower. Feedback is needed please. Thanks guys.

I actually just found some fans online at radioshack. Here is the link

RadioShack.com - Computers: Components & parts: Cooling systems

Please tell me what fans would work best for an intake and outtake, or if I only would need one that would do both since its gonna be a small box, and let me know. Keep it about $10 a fan please. Thanks.

I believe you can get better PC fans out there.. just a quick google and i got this :

Scythe "KAZE MARU" 140mm Case Fan

The good thing about them is they have three speed settings..

You need at least one intake fan and one out take.

These fan mounts stop Vibrating between the fan and wall...

Acousti Products - Anti-Vibration Products: Ultra Soft Fan Mounts

Thanks for replying arrid. What size mm should I be looking for, and should I be looking for something specific when buying a fan? I do know about cfm's or whatever it's called im just pulling a blank at the moment. I already know how to get a power supply to it and everything, and I also saw this DIY on some heat melting things that you put over your screws and melt it on and it takes the screw shape to help stop the vibration. So, basically am I looking at an anti-vibrating, silent fan? With the right specs of course..

spida said:

Thanks for replying arrid. What size mm should I be looking for, and should I be looking for something specific when buying a fan? I do know about cfm's or whatever it's called im just pulling a blank at the moment. I already know how to get a power supply to it and everything, and I also saw this DIY on some heat melting things that you put over your screws and melt it on and it takes the screw shape to help stop the vibration. So, basically am I looking at an anti-vibrating, silent fan? With the right specs of course..

Click to expand...

Well you can use any fan you want.

Heat shrink tubing is what you're talking about, use that and some foam strips, sandwiched between your fan and the wall.

Should cut out a lot of the vibrating.

You need intake, outtake and perhaps one inside to keep the air flowing.

Remember, intake low, outtake high because heat rises.

heres my setup very basic but effective.go to www.discounthydro.com for good qaIity eqip.get at Ieast 8" pots 1 and haf gaI or bigger.

Low and high, I never would have thought of that. It makes perfect sense, but I would never have thought of it Thanks man. And I know any fan will do, but I was just wondering if there is a certain type/size that will keep air flowing good. I was planning on having a small probably 6" fan inside too, so it can blow on the stems and/or lights. How does the rest of the set-up sound?

as Iong as you dont put them in smaII pots .if the Iite is cIose bIow the fan on the Iite more than on the PIants. if you have fan bIowing air out of the area ,its sucking in from somewhere. onIy one fan needed .or if you have a opening in the ceiIing to an attic , Iay a fan on top of the opening bIowing air upward wouId aIso puII air in from windows , open doors ,.i guess a 12" wouId work

spida said:

Low and high, I never would have thought of that. It makes perfect sense, but I would never have thought of it Thanks man. And I know any fan will do, but I was just wondering if there is a certain type/size that will keep air flowing good. I was planning on having a small probably 6" fan inside too, so it can blow on the stems and/or lights. How does the rest of the set-up sound?

Click to expand...

Sounds good, i'd stick as many CFLs in there as possible.

check out what this dude did with 1176 watts of CFL power!



International Cannagraphic Magazine Forums - ***DrBud Takes CFL SOG to the Next Level***

Ya, I realize the more light the better, but I was concerned still about heat even with the fans. I was thinking about 2 42 or 2 45 watt cfl's. This is just for veg, remember, for flowering I have a much bigger space, and I am taking reccomendations on what kind of light to use. HPS, HID, MH? What's the best for tight dense buds, without a noticeable amount on the electricity bill?

thats pretty good for cfI. you ought to see wat i got going on 600 watt. i'II come here and pic them in two more weeks wen fini. got 9 - 4 ft. taII orange skunk buds ,6 weeks in FIower, haf the buds are about the size of my fist stiII growin .

NICE! Sounds lovely. Is that your g13 grow or hashberry whichever that is in your sig? Also, what kind of light would work best for flowering. Probably a 2x4x6 area? 2 depth, 4 width, 6 height. I'm looking for not too expensive, not needing a whole lot of equipment to keep it cool and all of that.

B.Moonshine ,the strongest i've ever smoked, thc is 22%, very toxic ,not for the newby, not recom. for high schooI students.takes to the point on near tripping, soaking wet thc,unbeIievabIe.some thought it was as strong as heroin. most cood'nt smoke it. since ment. i have 9 of them Iadies germ. right now. those pIants there were grown under 400 hps, before i upgraded.to 2 -600 watt both air cooIed.

Nice, nice. I have 2 questions for you!

One, Where did you get the blue moonshine? Is that your avatar pic? If so looks nice..

Two, Can clones be cloned?

That was 3 but oh fuckin well. haha

spida said:

Nice, nice. I have 2 questions for you!

One, Where did you get the blue moonshine? Is that your avatar pic? If so looks nice..

Two, Can clones be cloned?

That was 3 but oh fuckin well. haha

Click to expand...

1. google is your friend

2. A clone can be cloned when it has grown enough for you to safely take a clone without it dyeing.

Thanks. Sometimes I use google, but google sometimes comes up with random shit that I don't want, so I'd rather ask someone growing it! Haha.

heres a coupIe pics took toda y. 2 to 3 more weeks be fini. orange skunk bud.

Those are beautiful! I'm jealous. I envy you! >< haha

thanks ,thier stiII growin, not much more though.waiting for b.moonshine seeds to germ. doin those next.