mean well

Simply put I want to use the Mean Well series HVG series drivers to power Fluence’s Spydr series fixtures (example: Mean Well HVGC-650W Driver with a Fluence Spydr 2P. Firstly, are they compatible? Secondly, can I pull it off with a pretty basic knowledge of LED/wiring and a soldering gun? I’m...

I want to built an LED grow light from scratch but I'm not sure what to look for when wiring in series and parallel on the same board. I want it to have different types of LEDs with different wavelength, like the Spider Farmer SF4000 or the SSK-272-RR-V2 for example, so I have to deal with...

Thank you in advance for your help and please excuse my lack of knowledge or if my terminology isn’t accurate. I am hoping someone can help me answer a question or two about running some Quantum boards using Meanwell drivers and I want to make sure I’m not overloading a 15 Amp circuit, as well...

Hi all! Been creeping the forum for a while, gaining some good knowledge! Decided to build my own COB lights based on what I've seen people say in the forums. Parts List 15 x Citizen CLU048-1212 3500k 90CRI GEN5 15 x Ideal Holders/Adapters 15 x LEDiL Angelina reflector 15 x 133mm Heatsinks...

What it do RIU, What is the max number of CXM22 I can run with a HLG 320H-48A? Here is the spec sheet of the HLG. The CXM22's FV = 36v. http://www.mouser.com/ProductDetail/Mean-Well/HLG-320H-24A/?qs=DNaZHaGatO2tAtx4g0zPkg%3D%3D I just bought 8 CXM22 to run on 2 of these HLG Drivers in a...

Heya Rollitup. I received my test unit from Geyapex today and wanted to show off a bit, especially "under the hood". So, here's how it came, less the top foam: http://imgur.com/Q8bx1Z7 Nicely packed, there was even a small hole in the box and it didn't even come close to the unit. Now...

Was thinking this http://ca.mouser.com/search/ProductDetail.aspx?qs=8%252br4Hz5Xir%2f3wZDYhUp8qA%3d%3d But after reading the 3-1 dimming function thread I am a bit unsure. That went way deeper than I need, I just need simple and cheap.

hi I'm 'hopefully' ordering my drivers today but I want to make sure I'm making right choice, I want to drive 2 x CLU048-1212C4-403M2K1 @ UK 230 volts and my choice was going to be the Mean Well ELG-100-C1400a (possible C1050a) wired in series. Please can some one give me some expert advice as...

Need Advice on choice of led driver , building a 2 lamp cob array Citizen CLU048-1212 in series but will running a mean well ELG-100-C1400A will it be better than the ELG-150-C1400A ? I am ok with math but not great. Also Please tell me if I am posting in wrong place!! Thanks in advance TJ

Hey! So this will be my first thread, and also quite a big deal for me, as it is about my first COB LED build. I am excited, to say the least. I am still gathering parts to put it all together, but I am close to being ready, and I wanted to share it with you all. I have to credit @Growmau5...