vero

Does the MEAN WELL XLG-150-H-A would work for 3 cobs which are 90cri, 1800mA; 52V; 93,6W (vero 29 BXRC-35G10K0-B-7X)? It's the only driver that I found in my country and think that might works. I'm very confused about how to choose the correct driver. Does anyone have any study material? (I...

Hello Rollitup! I need some advice please. I am planning to build a grow room with COB lights and a no-till bed. I need help determining how many plants I should fit in my space, and how much light I need. It is not my first time doing COB and no-till, but quite some time has passed since I last...

I'm currently working on a light for a 4x4. The goal is to get a pretty even 900-1000 µmol m-2 s-1 across the whole space running it at 500W or less. The COBs are Vero 29, 3500K 80 and 90 CRI. I took some measurements with an Apogee SQ-520 today. At 40cm distance, I get a bit over 1k in the...

Hello guys, I'm designing the heatsinks for my 6 veros 29 3500K B (7gen) which I intend to run on approximately 80w each (hlg 480H - 54V). I've learned some stuff here about the relation of surface area per heat watts and these stuff and concluded that the active heatsinks would be better for...

Hi guys, I'm calculating the dimensions of an aluminium passive heatsink for my setup. After some study I got that my cobs working with aprox 80w (480/6) ea would generate 20% of heat at the worst case temperature. Then I made: 0,2*(80)=16 heat watts and sized the dimensions of the heatsink...

Like the tittle says Im trying to get as close to 1000ppfd with the vero COBs as possible in my 4x4 tent. Cost of the fixture is not a factor, I just want the best. Also, what type Vero is best for it (A/B/C)? Im doing a DIY fixture so if you could suggest the right number of COBs, type of Vero...

I am having trouble with my Vero 29Se setup, and I'm baffled! (skip to "The Problem" below if you are just looking for a short question :P) Vero29 Cobs , HLG Meanwell Drivers , Cased Potentiometer Knob (It was ordered as a set, so the parts should all be adequately matching..i.e. the drivers...

Hey fellas. I wanna dip my toes into cobs after looking around and seeing positive things. However; I do not want to build my own board - maybe later down the road, but for now I'd like to keep it simple for my own sake. The thing I'd like to know is, if it is simple to swap chips on existing...

Hey everyone, I am needing some help here.I have 3 working marshydro led fixtures but would like too convert too cob style lights.I took a couple pics of my marshydro reflector48,and pro II 80 and need help choosing which cobs i can use too convert these lights.I did a search and couldnt find...

Quick question.. Can a Vero 29 69.4v cob run off a 71v driver?

has anyone used these yet? HLG-480H-C1400A - 343 FV HLG-480H-C1750A - 272 FV HLG-480H-C2100A - 229 FV HLG-480H-C2800A - 171 FV They seem well suited for a 4x4 area. I have just picked up a few, but haven't wired them up yet. In the past I've noticed that meanwell drivers seem to kick out...

So I've been lurking here for awhile now and I finally decided to replace my good ol' HPS with LEDs. My tent is a 4x4x6.5 and I'm doing a 2 plant scrog set up (currently under a 600w SE HPS) At first I thought I should go with 6 3500k and 4 3000k CXB3590s powered by 2 MW HLG-240H-1400B drivers...

INFO: Currently F18 400w of LED 2x GSC Thin Mint Pheno 1x THC Bomb 1x Blueberry Gum Light schedule of 12/12, shutting off at 8 PM and turning on at 8 AM. Somehow, electrical tape melted onto a wire nut and burned through the wire nut, burning and releasing one set of wires, and shutting off...

Hey fellow potheads. I am seeking reliable knowledge regarding LED lighting. With Cree I know the CXB3590 chips are the best to go with due to Higher efficiency than cxa chips. as for vero and citizen i dont know much and any info and experience with them you can share will be appreciated. I...

Hay all, Im. Building 2 arrays for my tent. Its an 8*8 tent but i only grow 10 plants at a time 5 per side of the tent.. So ill be building 2 5*vero29 arrays.. 1 cob per plant.. Hopefully its enough. Right now i use a 1000w hps and will continue to use during the couple wintet months. Im...

The Titan has landed! I am beyond pleased with this build! Ever since I built my CXA bars I was always interested in running Veros hard and Robin finally convinced me to make the jump. Excellent work my friend, thank you! This thing is blinding at the full 420w. I really like this color temp...

Please do anybody know where can I get vero v29 for cheap in the EU?

I mistakenly bought a lpc150-2450. Besides being 220 and the ability to blast a single cob, what can I do with it. I was thinking of turning into a veg light via parallel wirering. @2450 it's 31~62vdc. If I have four strings at 600ma does my vdc increase to 145vdc.