oilfield bud
Well-Known Member
Ok so would it would be a waste of time to try and c9ver a 4x4 spot with a 600w hps or should I just stick with 3x3 ?
light footprint
- Thread starter oilfield bud
- Start date
ttystikk
Well-Known Member
What ends up happening is that you get strong growth in the 2x2' patch under the lamp and then a combination of weak light and walls too far away for effective redirection, and that foot wide strip all the way around the tent just doesn't produce.
Two 315W CMH, two 600W HPS, a single or double ended thouie- with good cooling mandatory- or led could all be used to effectively light the space.
oilfield bud
Well-Known Member
Well I have 3 600s with a 4th on its way, I just got a new room to start growing and am in the process of setting up.
ttystikk
Well-Known Member
4 x 600W would light a 6 x 6' area really nicely.
Alaric
Well-Known Member
Hey tty,
Happy new year.
Yes, four 600s for a 6 x 6 canopy. I'm a believer in the benefit of light movers-----especially with multiple lights ( the plants get light coming and going).
A~~~
ttystikk
Well-Known Member
Having played with them for years, I'll agree they have their uses - and their limitations. They're good for moving the light source enough to help with penetration. They won't magically create yield unless the light distribution in the room is truly substandard.
EarthBoxConnoisseur
Active Member
I've been running a 600 over a 4x4 area for a long time, and it covers just fine as long as you contain the light (mines in the corner of the room and I hang a 3ft tall piece of panda on the open side). I guarantee you will get more yield covering 16 sq. feet instead of 9. Almost twice the area
patrickkawi37
Well-Known Member
Absolutely not. I use 5x6 per 1k. People wonder why there yields are less .. The more sqft of canopy you have the more nugs you get.
Alaric
Well-Known Member
Hey pat,
If I remember correctly, you're running double-ended lights------no glass, sealed room with large air conditioning to keep temps within bounds?
The 5 x 6 canopy footprint you suggest is based on a de light?
I have no experience with the DEs-----only conventional single ended 1K hps hortilux, air cooled on movers.
I have tried to cover a 5 x 5 canopy with a 1K hortilux-----just wasn't satisfied with the perimeter bud quality----so I backed off to a 4 x 4.
edit: If you have a light meter, would you please measure at what distance directly below the bulb is 10,000 foot candles (max sunlight intensity, here anyway)
A~~~
patrickkawi37
Well-Known Member
I have a few de but mostly only single ended . I don't use glass currently and I do oversize my air conditioners. Did you clean up the bottoms enough? Did you have a xl reflector ? What is normal weight for you under 4x4?
I don't notice any difference in the quality from the nugs at the end of the canopy compared to the ones directly under the light. If there was a diminished quality I guess I don't know because it all ends up in the same bag. I ran 3200'watts.. 2 double ended 600s and 2 single ended 1k watts in 4 trays covering a 10x10. I ended up with just under 11ps and it was my first run in the room. Canopy> light
Last edited:
CallinCarRamRod
Well-Known Member
ttystikk
Well-Known Member
I've never seen the need to use a cool tube vertically, the heat rises up and away with just a bit of help from a fan.
