SOG
Well-Known Member
that's a very nice way to run the drain
solves an issue I've been contemplating about
where did you get these?
Harvest a Pound Every Three Weeks!
- Thread starter StinkBud
- Start date
solves an issue I've been contemplating about
where did you get these?
whysohigh
Well-Known Member
im not sure the exact size, ill check and get back to you guys, but the small grommets for the pump feed i just got at home depot, the larger ones i think are 1 1/4" ill have to check. i have the guy at my hydro store get them for me, im not sure where he orders them from but they say gerneral hydroponics right on them, they sit real flush, all the water drains good, no leaks. i use some self tappers screws to hold the end caps on and i have some rope caulk around the edge and it makes a nice water proof seal and everytime i need to clean it the rope caulk is replacable.that's a very nice way to run the drain
solves an issue I've been contemplating about
where did you get these?
whysohigh
Well-Known Member
here you go, a little past half way down the page http://www.generalhydroponics.com/genhydro_US/parts_aeroflo60.html
SOG
Well-Known Member
jobless
Member
Hey everybody, just thought I'd share this little nugget of info with you all. Check this out: http://losangeles.craigslist.org/sfv/grd/1318642296.html
This person took Stinkbud's plans and is now trying to sell his setup on Craig's List. They're asking $1200 for four of them! Ridiculous... It's kind of totally trashing Stinkbud's intentions, right? I mean, I thought that the whole point of this entire thread was to provide FREE information on how to build a cheap and super-effective method of growing your own medicine, wasn't it? Now this person is trying to cash in on Stink's kindness. Pathetic.
Anyway, yeah, I've been following this thread for a while and, even though I've only posted a couple of times, I feel like we're all kind of family here, so I figured I'd mention this.
This person took Stinkbud's plans and is now trying to sell his setup on Craig's List. They're asking $1200 for four of them! Ridiculous... It's kind of totally trashing Stinkbud's intentions, right? I mean, I thought that the whole point of this entire thread was to provide FREE information on how to build a cheap and super-effective method of growing your own medicine, wasn't it? Now this person is trying to cash in on Stink's kindness. Pathetic.
Anyway, yeah, I've been following this thread for a while and, even though I've only posted a couple of times, I feel like we're all kind of family here, so I figured I'd mention this.
GringoLoco
Well-Known Member
Not the first time we've seen this, although this guy is crazy! $1200 for 4 flower systems, a cloner, and a vegger? Figure $100 each in parts and he is basically doubling his investment! Definitely not following in the Stink tradition. Not only that, but did you see "THESE were used for a month- they'll need a quick rinse-with hydrogen peroxide solution but otherwise great" ... nice, $1200 and you don't even wipe them down? I would bet money the workmanship is shoddy too, I just get that impression.
Ha!
Nice! In the event of a power outage, you can raise the drain assembly to retain more water in the post. Super clean... I wonder if your NFT may become more of a DWC system as the roots begin to grow into the drain and slow the drainage. You may want to consider longer irrigation intervals if it seems like 5 minutes off doesn't allow sufficient drainage of the posts through the drain tube. A total clog would cause a flood out one or more of the site holes.
trouble9039
Well-Known Member
trouble9039
Well-Known Member
Attachments
GringoLoco
Well-Known Member
Trouble, for my scrog I went real simple: I took a roll of stuff like this (http://www.unbeatablesale.com/bci18354.html) and some 3/4" PVC pipe, tees, and elbows.
I then measured out the length, width, and height I needed, cutting (2) of the width, (2) length, and (4) height. I joined them altogether with (4) tees and (4) elbows. Then I cut a swatch of vinyl fence to the appropriate dimensions, attached to the PVC with zip ties, and vuala!
whysohigh
Well-Known Member
well i have about 6 or 7 harvests with these drains and so far no problems, the roots get trimmed if they start makin their way towards the pump in the rez. other than that, its problem free
trouble9039
Well-Known Member
I started out using that system years ago, and I found it to be A pain in the butt to clean (not like the E&F is any easier)! I am just facinated by the scrog and was looking at giving it A possable run sometime
I am using Stinkbuds Dual Chamber Aeroponic Veg Unit to SOG in, so about 8 weeks in there. The idea is to keep the roots in the top container and out of the solution in the bottom res, but im guessing the roots will get long over 8 weeks and find their way to the bottom.
i put a wire mesh around the pvc were the hole from the bottom to the top container is, but im afraid it wont be enough. if the roots do grow into the bottom res, do i need to aerate the water with airstones, or will the water pump be enough. im also worried about clogging my pump with roots.
Help?
Thanks for any advice. id really appreciate it. BIG THANKS to Stinkbud for your wonderful knowledge!
and to everyone else on here providing help for those in need.
n4a2t0e
i put a wire mesh around the pvc were the hole from the bottom to the top container is, but im afraid it wont be enough. if the roots do grow into the bottom res, do i need to aerate the water with airstones, or will the water pump be enough. im also worried about clogging my pump with roots.
Help?
Thanks for any advice. id really appreciate it. BIG THANKS to Stinkbud for your wonderful knowledge!
and to everyone else on here providing help for those in need. n4a2t0eAttachments
BIGTIMEROOFERR
Well-Known Member
cut the roots when they get to long it wont hurt themI am using Stinkbuds Dual Chamber Aeroponic Veg Unit to SOG in, so about 8 weeks in there. The idea is to keep the roots in the top container and out of the solution in the bottom res, but im guessing the roots will get long over 8 weeks and find their way to the bottom.
i put a wire mesh around the pvc were the hole from the bottom to the top container is, but im afraid it wont be enough. if the roots do grow into the bottom res, do i need to aerate the water with airstones, or will the water pump be enough. im also worried about clogging my pump with roots.
Help?
Thanks for any advice. id really appreciate it. BIG THANKS to Stinkbud for your wonderful knowledge!
WhiteWiddow
Active Member
where can i get these sprayers?
andyman
Well-Known Member
where did ya get them, it looks sweet like it wouldnt make as much waterfall sound for people with sound problems/stealth
never mind I see now
thats was my initial guess, but i thought i read somewhere that the size of roots are equivalent to the size of the plant and if u cut the roots short the plants growth will slow to a hault... just double checking.. thanks for the reply that'll be an easy fix.
andyman
Well-Known Member
Ive been doing some in dual veg containers I modified to use for flowering and only the larger tap roots seem to get into the bottom and it doesnt seem to change anything. I put a net around the pump so it doesnt get clogged. I dont even cut the roots and there fine. The water gets mixed enough from it draining down into the 2nd container. Also the smaller the drain holes and more of them the better, rather than large drain holes. If you want to keep the roots out of the water. My camera seems to be missing or I would take a pic of my outdoor units I made using the modified veg units with 6 plants in each. 14 gal top and 10g res. seems to be loving the natural sunlight and the water seems to stay cool enough.I am using Stinkbuds Dual Chamber Aeroponic Veg Unit to SOG in, so about 8 weeks in there. The idea is to keep the roots in the top container and out of the solution in the bottom res, but im guessing the roots will get long over 8 weeks and find their way to the bottom.
i put a wire mesh around the pvc were the hole from the bottom to the top container is, but im afraid it wont be enough. if the roots do grow into the bottom res, do i need to aerate the water with airstones, or will the water pump be enough. im also worried about clogging my pump with roots.
Help?
Thanks for any advice. id really appreciate it. BIG THANKS to Stinkbud for your wonderful knowledge!
Ive been doing the outside veg unit moded into flowern for about 2 months now. Next year I want to do a small greenhouse or screen roof over many stinkbud units.
Just use many small holes for the water to drain
NICE! many thanks Andyman! Glad i wont have to worry about aerators. I'll put smaller holes in all my units.. when u say small, do u mean like 1" holes, 1/4" holes, or even smaller.?
And i remember seeing instructions for your contactor cycle timer setup, but i cant seem to find them now, any chance you could hook up a link?
thanks so much man! i really appreciate the help... first time grower.
n4a2t0e