Club 600

[DST]

all I know bud, is that your cooker is generally fixed to it's own power supply, seperate from anything else...so not sure if I would do that....saying that, my kitchen is wired up like a disaster and when I run too many things the power goes off....message to self - speak to electrician again!!!!! Don't want to give you bum advise as lecky is not my thing, especially not US stylee.

Bob Smith the Bored electrician can probably help you out....if you need a link to his page let me know.

 

[1badmasonman]

I hear ya DST. Id rather be safe with it. Ive got a pot head buddy thats a sparky, Just dont want anyone to know what im up to. Maybe ill concoct a story about why i would need to tap my 220. Ive done this before when i bricked my house i tapped a 220 cord in that panel to run by block saw and it worked fine. But like i said im no electrician, yeah i guess if BoB is bored maybe i should talk at him. Thanks Pal.

 

[DST]

If you have done it before then that's different....but there's reasons for the safety loads they put on lines I guess....good luck bru.

 

[Drr]

I don't remember is I posted in here..

the thread is too big to read through right now.. i'll comb over it over time though..

here is my 600...

check out the link in the sig also if you want.. Way more pictures..

I will be harvesting 3 withing the next 2 weeks and the rest within 3-4 weeks..

 

[DST]

I don't remember is I posted in here..

the thread is too big to read through right now.. i'll comb over it over time though..

here is my 600...

check out the link in the sig also if you want.. Way more pictures..

I will be harvesting 3 withing the next 2 weeks and the rest within 3-4 weeks..

Very nice Drr, cool name as well (no need to abbreviate it when too stoned!)

Hope you stick around and share your harvest and grows.

Welcome to the 600 and fekking hup hup to this (sorry, hup hup is a Dutch thang)

 

[mcpurple]

Here's the link folks:
https://www.rollitup.org/toke-n-talk/301604-tell-me-joke-riddle-me.html

To get a link 1BMM, all you need to do is highlight the http address in your browser bar, then copy and paste it into a post: eh voila

There's also this thread which you might want to have a look at:
https://www.rollitup.org/toke-n-talk/224459-pix-make-you-lol-warning.html

This is a monster thread...

i love that thread its hella funny when baked, very good thread to laugh.

cheers heyduke!

and mcpurple lookin good man you do any LST topping or fimming with your girls?

thanks man, i topped them when i first got them and then started lst about 1 week ago, thats why she they are so wide, i think they will produce good, the smell is already intense and the whole plant is sticky, she is growing like an inch each nite, this strain i beleive woul do great in scrog growing, ot even one huge lsted plant it has crazy braching, i will get some better pics of them soon in natural light, and i dont ever fim, IMO fimmming sux its just a screwed up topping attempt, and i also topped all my plants in veg, using ubs way and a few my way, the ones i did ubs way got 3-4 tops and my way i got 5-6 tops so all the topping workd good on them

I don't remember is I posted in here..

the thread is too big to read through right now.. i'll comb over it over time though..

here is my 600...

check out the link in the sig also if you want.. Way more pictures..

I will be harvesting 3 withing the next 2 weeks and the rest within 3-4 weeks..

ya i know what u mean this thread is huge and only gettin bigger, very nice plants to, is that one pic a strain thats ment to go purple or did the temps get low on her, just curious

 

[mcpurple]

this is my first time tryin this method i usally have a shake box with a screen in it to shake the trichs out, but i tried usin the alcohol method, i put about 7 gs in a jar with alc, and will let sit for 24 hours or longer, but im confused as to how to get just the trichs out of the mixture, i have seen people use coffee filters but it seems to me that the trichs would get stuck inthe paper any advice

 

[Integra21]

this is my first time tryin this method i usally have a shake box with a screen in it to shake the trichs out, but i tried usin the alcohol method, i put about 7 gs in a jar with alc, and will let sit for 24 hours or longer, but im confused as to how to get just the trichs out of the mixture, i have seen people use coffee filters but it seems to me that the trichs would get stuck inthe paper any advice

From what Ive read, you pour the mixture on a large plate and warm it and leave it going untill all of the liquid evaporates. then just scrape the bottom of the plate and bam, hash.

 

[justlearning73]

Hey guys quick question. I have some bag seed that have popped going on 4 days now. I was wondering are the stems normally purple when the hatch? Or is it a temp thing? Currently running about 80 F. What is a good temp if this is wrong for hatchlings plus what is the optimum temp once in full veg and then flowering. I will be using DIY Co2 in flower stage. Thanks for any help.

 

[1badmasonman]

DST eewww them are looking perty.

Drr looking good man.

MCP good luck on the hash

Well i got to the bottom of my electrical issue. I ended up calling my stoner sparky pal and he advised me not to tap the breaker panel. He is also the same guy who put that box in there for me to run a electric stove vs gas. So without blowing my cover i quizzed him on putting another sub panel in if i could just duplicate the one he already installed and will that work to run my welder. And he says wuh huh. So i guess ill try it. Anyways theres not much excitment over here but i took a few new pics. Heres the progress.

Mylar does have its disadvantages afterall. Peace 1BMM

 

[)V(ad Hatter]

i seen that this was the 600 club and i figure i got a 600w HPS (w/ hortilux Super HPS bulb) so i should post my babies

so this is my first grow i have 12 (er 13) euforia plants the large one was going to be my momma but because my veg room isnt finished yet i decided to bloom her and take one of the potted clones for my new momma taking up far less room i have 6 potted in FF ocean forest (Great shit BTW) the 5 small + momma and 6 in a self made aero chamber with the exception of momma the potted plants and the aero plants were cut at the same time so you can really see the difference.

check out my grow journal i update (w/pics) it alot and welcome any advise i can get this is my second day of bloom.

journal: https://www.rollitup.org/grow-journals/299758-euforia-6-diy-aero-6-a.html

 

[1badmasonman]

i seen that this was the 600 club and i figure i got a 600w HPS (w/ hortilux Super HPS bulb) so i should post my babies

so this is my first grow i have 12 (er 13) euforia plants the large one was going to be my momma but because my veg room isnt finished yet i decided to bloom her and take one of the potted clones for my new momma taking up far less room i have 6 potted in FF ocean forest (Great shit BTW) the 5 small + momma and 6 in a self made aero chamber with the exception of momma the potted plants and the aero plants were cut at the same time so you can really see the difference.

check out my grow journal i update (w/pics) it alot and welcome any advise i can get this is my second day of bloom.

journal: https://www.rollitup.org/grow-journals/299758-euforia-6-diy-aero-6-a.html

Very nice clean set up im diggin it. I like FF soil its some good stuff. I like there whole line actually. Looks like your plant are nice and healthy too. Im sure you will fit in just fine here.

 

[)V(ad Hatter]

thanks man cant wait just 8 long weeks till i can potentially be smoking the fruits of my labor ALOT of time 50+hours a week and lots of $$$ hoping my first grow is worth smoking

 

[swish]

whats good people,? just wanted to show you guys sum new pics.
this is the finish of week 4...
at first i didn't see much happening but after i compared a few pics i think its all good.after sum research i now know i wont be seeing buds till week 6 or 7 but its nice to watch the hairs and crystals go crazy.
so far ive been adding an extra tablespoon of nutes every week, ( both a & b of dutch master gold range ) keeping the additives the same and they show no signs of stress so far.
well, thats bout it, im gonna listen to my boy phill and get going on these aurora indica beans

 

[rollmeUPoneSCOTTY!]

whats good people,? just wanted to show you guys sum new pics.
this is the finish of week 4...
at first i didn't see much happening but after i compared a few pics i think its all good.after sum research i now know i wont be seeing buds till week 6 or 7 but its nice to watch the hairs and crystals go crazy.
so far ive been adding an extra tablespoon of nutes every week, ( both a & b of dutch master gold range ) keeping the additives the same and they show no signs of stress so far.
well, thats bout it, im gonna listen to my boy phill and get going on these aurora indica beans

woot!!

look just like my salmoncreek(5 weeks in)

 

[1badmasonman]

Beautiful. Pat yourself on the back. How do you like them DM nutes. Thats what im goin with on my grow. Not quite ready yet though. Another member on this thread uses DM and likes them and im all but sold. Again Bravo on the gro

 

[DST]

this is my first time tryin this method i usally have a shake box with a screen in it to shake the trichs out, but i tried usin the alcohol method, i put about 7 gs in a jar with alc, and will let sit for 24 hours or longer, but im confused as to how to get just the trichs out of the mixture, i have seen people use coffee filters but it seems to me that the trichs would get stuck inthe paper any advice

Check out Rosemans HAsh making technique https://www.rollitup.org/newbie-central/10392-making-hash-oil-leaves.html

From what Ive read, you pour the mixture on a large plate and warm it and leave it going untill all of the liquid evaporates. then just scrape the bottom of the plate and bam, hash.

I think Interga's basically got it!

Hey guys quick question. I have some bag seed that have popped going on 4 days now. I was wondering are the stems normally purple when the hatch? Or is it a temp thing? Currently running about 80 F. What is a good temp if this is wrong for hatchlings plus what is the optimum temp once in full veg and then flowering. I will be using DIY Co2 in flower stage. Thanks for any help.

Temps around 79 for babies, and Purple stems happens, depends on the strain.

i seen that this was the 600 club and i figure i got a 600w HPS (w/ hortilux Super HPS bulb) so i should post my babies

so this is my first grow i have 12 (er 13) euforia plants the large one was going to be my momma but because my veg room isnt finished yet i decided to bloom her and take one of the potted clones for my new momma taking up far less room i have 6 potted in FF ocean forest (Great shit BTW) the 5 small + momma and 6 in a self made aero chamber with the exception of momma the potted plants and the aero plants were cut at the same time so you can really see the difference.

check out my grow journal i update (w/pics) it alot and welcome any advise i can get this is my second day of bloom.

journal: https://www.rollitup.org/grow-journals/299758-euforia-6-diy-aero-6-a.html

Shall we call you Hatter? Welcome bru, and thanks for posting. Will stop by the journal to investigate more at some point.

DST eewww them are looking perty.

Drr looking good man.

MCP good luck on the hash

Well i got to the bottom of my electrical issue. I ended up calling my stoner sparky pal and he advised me not to tap the breaker panel. He is also the same guy who put that box in there for me to run a electric stove vs gas. So without blowing my cover i quizzed him on putting another sub panel in if i could just duplicate the one he already installed and will that work to run my welder. And he says wuh huh. So i guess ill try it. Anyways theres not much excitment over here but i took a few new pics. Heres the progress.

Mylar does have its disadvantages afterall. Peace 1BMM

We see ya dude, hehe. When I saw that first pic, then scrolled down to the 2nd, I thought, shit, check the size of those carbon filters, but they are water drums, haha. Only reason I thought that, when I was down the local grow shop, they had carbon filters in there, industrial sized ones, about the size of me.
It's coming along bro!!

woot!!

look just like my salmoncreek(5 weeks in)

]
What up Scotty.

 

[Don Gin and Ton]

nice boxer madmasonman! my family bred them for years top dogs!!

 

[1badmasonman]

Thanks Don thats Rocco Loco. Hes an asshole ahahah. No hes a great dog just needs some training like every living thing does. Funny story about him, I had to get rid of him cuz My girl and i had a baby boy on the way, this was 10 months ago. We were missing him bad after he was gone and regretted getting rid of him. So 10 months go by we are still missing Rocco and my other 2 boys during the whole 10 months were devastated and wanting to see him but i lost contact with the people i sold him to. So wednesday I had an arrand to run and i drove by the dog park enroute to run my arrend and i looked to see if possibly rocco may be there with the new owners, But nope. So i get home about an hour later and my girl tells me the people we sold rocco to have to move and cant keep him where they are moving and do we want him back. Obviously we where ecstatic. I was really strange that i was just thinking about him and bam 2 hours later hes back home. He has picked up some bad habits though since he first left so ill be spending some quality training time on him.

Dont mean to get off subject just thought id share that bit with you guys. Its kinda cool how stuff works out sometimes.

DST lol that would be one hell of a carbon scrubber. Im wanting a bigger one than i have now. That one i got works pretty good, last grow i had close to 30 plants and it kept the smell out the house ok. This go ive re routed the exhaust to vent out of my chimney stack so its not going to be as big of an issue as when i was venting into the house. We shall see. I got a nosey old lady that lives smack next door so i may upgrade and run it anyways just to be safe.

 

[horribleherk]

recently upgraded from 400w. to 600w. & my power bill isnt suffering like i thought it might & knowing what i know now i wish i would of got the 600w. in the first place